Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 64 for “"Slip surface"”.
-
Slip surface in sinkholes : an analysis of the slip line of an idealized axisymmetric open karst pipe
… pipe sinkhole in Tennessee is described. The slip surface at failure in an idealized c, φ, γ soil around the open karst pipe sinkhole due to working loads along the surface is evaluated by the theory of plasticity. The mechanical behavior of the soil is approximated by that of an ideal …
-
Instrumentation systems for and failure mechanisms of an induced slope failure project
… were excavated to locate and identify the slip surface. The slip surface was traced and surveyed in each trench. Large diameter (300mm) and block samples were taken through the slip surface for laboratory analysis.</p><p>The author, as Research Assistant for the project, was responsible for …
-
Landslide deformation character inferred from terrestrial laser scanner data
… processes requires good knowledge of ground surface displacements but acquiring this information is challenging. Three dimensional point-cloud data from terrestrial laser scanning (TLS) show potential for obtaining ground displacements accurately. Problems arise, however, when estimating …
-
Mη γραμμική δυναμική μετακίνηση πρανών σε επιφάνεια ολίσθησης
… of one-dimensional (1-D) dynamic stick-slip models to simulate the seismic displacement along slip surfaces has been illustrated. They are well-suited for extensive parametric analyses, that are sometimes needed because soil properties and applied motions are not known with certainty. …
-
Meaning, measurement, and field application of fully softened shear strength of stiff clays and clay shales
… silt, and glacial clays, using the observed slip surface or possible slip surface determined based on adequate field observations, together with the observed or assumed groundwater pressure conditions reported in the original references. In summary, fully softened shear strength is defined at …
-
Contribuição ao processo de dimensionamento de cortinas atirantadas
… The anchor load was calculated from the critical slip surface, and the fixed length was positioned from the slip surface corresponding to an acceptable safety factor, e.g. 1.5. The same approach is suggested by the NBR-5629 standard. The internal failure, analysed by the Ranke and Ostermayer …
-
A parametric study of twenty earthen levee cross sections from southeastern Louisiana using the LMVD Method of Planes and other limit equilibrium procedures
… of Planes assumes a three-part, noncircular slip surface and generally does not satisfy any form of static equilibrium. In computing a factor of safety, the Method of Planes considers a balance of horizontal “resisting” and “driving” forces in computing a factor of safety. To better …
-
Revegetation of recent soil slips in Manawatu : a thesis presented in partial fulfilment of the requirements for the degree of Master in Applied Science at Massey University
… Holcus lanatus were oversown on two recent soil slip surfaces at AgResearch’s Ballantrae pastoral hill‐country farm near Woodville. The two slip surfaces were located on (Manamahu steepland soil) sedimentary mudstone. One slip had a north aspect and the other had a south aspect. Both slips were …
-
Investigation of the delayed slope instabilities in earth fill dams due to creep through the application of the time-dependent model for structured soils (TMS)
… of significant strains which defined the slip surfaces. Two slip surfaces were observed to form, both on the upstream and downstream side of the clay core at the interface with the rockfill. Results of a separate earlier study generally agree with the existence of the shallow upstream slip …
-
MATLAB script for slope stability calculations with COMSOL Multiphysics
… is programmed to test a series of circular slip surfaces defined by their centre coordinates and their radius. The script first verifies the intersection between the slope geometry and slip surface. The intersecting part is then divided into a series of equalwidth vertical slices. Stresses …
-
Teritorijos Aukštakalnio g. 16, Utenoje inžinerinės geologinės sąlygos ir šlaito stabilumo įvertinimas /
… model showed that the highest probability of slip surface formation is in the technogenic soil layer.
-
Failure behaviour of two landslides in silt and clay
… (markedly noncircular) shape of the bounding slip surface, so that the slide forms initially a kinematically inadmissible mechanism; 2) a strong contrast between a low shear strength, non-brittle bounding slip surface and a high strength, brittle slide mass. These conditions may produce a …
-
A review study of river bank stability and slope movements in the Winnipeg area
… Bishop's Method of Slices for a circular slip surface and a modified rigorous Janbu solution for a non-circular failure surface. For both methods, the porewater pressure distributions were incorporated in a computer program as piezometric levels. Improved results of factors of safety …
-
The design and construction of a large plane strain apparatus for testing reinforced soil specimens
… to model an element of soil situated along a slip surface in a reinforced embankment. The device constructed is capable of testing a sample 9.4 inches square and 23 inches high with full-size reinforcing materials included. A 30,000-pound capacity load frame and a 20,000-pound capacity …
-
Continental break-up at the Galicia Margin
… over the mechanism including fault linkage. Slip initiates at different points on the a weakened serpentinised mantle forming a slip surface that propagates up through a network of faults forming the S reflector, a detachment fault whilst also dissecting the crust, allowing further water …
-
Neural network and analytical modeling of slope stability.
… non-cohesive soils. For sandy slopes, a planar slip surface is employed. For clayey slopes, circular slip surfaces are employed including Toe Failure, Face Failure and Base Failure resulting from different locations of a hard stratum. Earthquake effects are considered in an approximate manner in …
-
Numerical Simulation of Hydrodynamic Bearings with Engineered Slip/No-Slip Surfaces
The no-slip boundary condition is the foundation of traditional lubrication theory. It says that fluid adjacent to a solid boundary has zero velocity relative to that solid surface. For most practical applications the no-slip boundary condition is a good model for predicting fluid behavior. …
-
Melt fracture behaviour of molten polypropylenes
… to determine the conditions for the onset of slip, surface and gross melt fracture. It was found that there was no distinction between surface and gross melt fracture, which is commonly observed in the case of polyethylenes. Furthermore, the flow curves determined by using capillaries having …
-
Hydraulic Testing of the Big Hole Fault, Northern San Rafael Swell, Utah
… were conducted at the Big Hole fault, a dip-slip normal fault in the northern San Rafael Swell of east-central Utah. Three tests were conducted at each of two locations along the fault, each location having a different total displacement. Water was injected in the footwall, hanging wall, and …
Page 1 of 4