Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Slip-stick"”.

  1. Slip-Stick Contact Conditions for the Thermo-Mechanically Coupled Flow Drill Screw Process

    … A modeling approach that incorporates both a slipping and sticking condition is theorized to be more appropriate for frictional processes of this nature, but no coupled models currently exist. The following research aims at integrating these two conditions under a single model to enable more …

    clemson Repository record for Slip-Stick Contact Conditions for the Thermo-Mechanically Coupled Flow Drill Screw Process (opens in a new tab)

  2. Model Reduction for Nanoscale Stick-Slip Friction Using Proper Orthogonal Decomposition

    … The molecular dynamical simulations that model slip-stick friction are often very large and complex, requiring a great deal of computational resources and time to run. In this paper, proper orthogonal decomposition (POD), a model reduction technique that has been successfully applied to a number …

    maryland Repository record for Model Reduction for Nanoscale Stick-Slip Friction Using Proper Orthogonal Decomposition (opens in a new tab)

  3. Switching linear parameter-varying electronic throttle control for automotive engines

    … dynamics vary considerably with respect to slip-stick friction, limp-home springs, and unmodeled disturbances. The complete plant model encapsulates the aforementioned nonlinear dynamics as a linear model that changes affinely with parameter-varying slip-stick friction and voltage …

    ubc Repository record for Switching linear parameter-varying electronic throttle control for automotive engines (opens in a new tab) Download PDF for Switching linear parameter-varying electronic throttle control for automotive engines (opens in a new tab)

  4. Vývoj UHV STM/AFM

    … napájecích pulzů, které slouží k vytváření slip-stick pohybu pomocí piezokeramických segmentů, jenž jsou jeho akčním členem. V textu jsou dále naznačeny možnosti řešení problémů spočívajících v jeho umístění do UHV (Ultra High Vacuum) a to jak na základě měření, tak i zpracované simulace.

    brno-tech Repository record for Vývoj UHV STM/AFM (opens in a new tab)

  5. Dynamic response of small agricultural drive tires

    … torsional deflections. Tire behavior due to the slip-stick phenomenon was simulated using a two degree of freedom model that allowed torsional movement of the tire carcass relative to the wheel and vertical movement of the tire on a swing arm. Tire response was simulated for each tire at three …

    nebraska Repository record for Dynamic response of small agricultural drive tires (opens in a new tab)

  6. Výpočtové modelování hluku vyzařovaného tramvajovým kolem při průjezdu zatáčkou

    … kolem a kolejnicí spolu s jevem prokluz-ulpění (slip-stick) vede k samobuzenému kmitání kola, což má za následek vyzařování nepříjemného pískavého zvuku. Byly vytvořeny dva MKP modely řešené ve frekvenční oblasti. První model je založen na předepnuté modální analýze. Vzhledem k tomu, že matice …

    brno-tech Repository record for Výpočtové modelování hluku vyzařovaného tramvajovým kolem při průjezdu zatáčkou (opens in a new tab)

  7. Damping in Carbon Nanotube Nanocomposites by Interfacial Slippage and Thermally Augmented Polymer Relaxation

    … damping mechanisms in nanocomposites is a ‘slip-stick’ mechanism in which the interactions between the filler and polymer results in energy dissipation in a frictional mode along the interface. Microstructural design of nanocomposites, such as the development of CNT alignment, was pursued …

    tamu Repository record for Damping in Carbon Nanotube Nanocomposites by Interfacial Slippage and Thermally Augmented Polymer Relaxation (opens in a new tab)

  8. An experimental study of frictional phenomena around the pin joints of plates using moire interferometry

    … treatment of the following subjects: slip-stick phenomena, variation of contact zone, distribution of frictional force at the contact region, effects of frictional shear stress on stress concentration, and identification of slip amplitude. Experimental techniques and algorithms of …

    vt Repository record for An experimental study of frictional phenomena around the pin joints of plates using moire interferometry (opens in a new tab)

  9. Rheology Of Cross-Linked Polymers And Polymer Foams: Theory And Experimental Results

    … of a polymer foam. Based on the theorized slip/stick of polymer chains as they slide past each other, this model successfully predicts the behavior of a PMI polymer foam under tensile loads. This model lends insights into polymer microscopic behavior, which may be used for the development …

    wayne-thes Repository record for Rheology Of Cross-Linked Polymers And Polymer Foams: Theory And Experimental Results (opens in a new tab)

  10. Integrated control and estimation based on sliding mode control applied to electrohydraulic actuator

    … a challenging mechanical problem caused by a slip-stick characteristic in friction. Another conclusion is that the revised form of the SVSF could obtain robust and fast state estimation for nonlinear systems.The original contributions of the research include: i) proposing the SMCF and SSMCF, …

    sask Repository record for Integrated control and estimation based on sliding mode control applied to electrohydraulic actuator (opens in a new tab)

  11. Mechanical compression of coiled carbon nanotubes

    … consistent with compression, buckling, and slip-stick motion of the nanocoil. The chemical structure of the nanocoil and its orientation on the tip was determined using scanning and transmission electron microscopy. The mechanical stiffness of eighteen different nanocoils was determined in …

    gatech Repository record for Mechanical compression of coiled carbon nanotubes (opens in a new tab)

  12. Theoretical and numerical studies of slip flows

    This thesis presents an intensive study on slip flows of Newtonian and Non-Newtonian fluids carried out both analytically and numerically. Industrial applications of these flows are found in classical industries such as in polymer processing (for instance in extrusion) and in more modern …

    minho-thes Repository record for Theoretical and numerical studies of slip flows (opens in a new tab)

  13. The influence of hydrogen gas exposure and low temperature on the tribological characteristics of ti-6al-4v

    … the surface and that low temperature induced a slip-stick wear mechanism under higher loads, but not at lower loads and regardless of exposure to hydrogen gas. This research opens avenues for future investigation in effects of hydrogen and low temperature embrittlement on the tribological …

    tamu Repository record for The influence of hydrogen gas exposure and low temperature on the tribological characteristics of ti-6al-4v (opens in a new tab)

  14. Dynamics of a Vibration Driven Bristle Bot

    … a mathematical model which accounts for the slip-stick motion of the bristles with the substrate. Analytical conditions for the system to exhibit a particular type of motion are formulated and the system of equations defining the motion are solved numerically using these conditions. The …

    clemson Repository record for Dynamics of a Vibration Driven Bristle Bot (opens in a new tab)

  15. Flow Behavior of Sparsely Branched Metallocene-Catalyzed Polyethylenes

    … two molecules was found to mitigate oscillatory slip-stick fracture often observed in linear polyethylenes. Furthermore, the presence and severity of gross melt fracture was found to increase with long-chain branching content. These indirect effects were correlated to an early onset of …

    vt Repository record for Flow Behavior of Sparsely Branched Metallocene-Catalyzed Polyethylenes (opens in a new tab)

  16. Hydrodynamic lubrication and coating of wire using a polymer melt during drawing process.

    … to the shear stress, which exhibits itself as slip in the polymer. An alternative theory is also presented which assumes that shear stress is zero at the polymer/tube interface. This much simplified analysis allows the length of the deformation zone to be determined. An extensive series of …

    sheffield-hallam Download PDF for Hydrodynamic lubrication and coating of wire using a polymer melt during drawing process. (opens in a new tab)

  17. Frictional half-plane contacts in partial slip in the steady-state

    … of loads will give rise to a state of partial slip. At the core of this thesis lies a family of partial slip solutions for half-plane contact problems subject to different forms of periodic loading. This collection of partial slip solutions allows engineers and researchers alike to assess …

    oxford Repository record for Frictional half-plane contacts in partial slip in the steady-state (opens in a new tab)

  18. Water-Solid Interfaces of Textured Materials

    … penetrating rate, receding contact angle, slip-stick motion of contact circle. Results have revealed fundamental mechanisms of wettability, adhesion and penetration in water-textured material interfaces. Specific geometric design factors of textured materials, which are related to behaviors …

    tamu Repository record for Water-Solid Interfaces of Textured Materials (opens in a new tab)

  19. An acoustical study of the properties and behaviour of sea ice

    … acoustical radiation from some cracks implies a slip-stick seismic movement over the faults, and some cracks tend to radiate more high frequency sound downwards rather than sideways. This phenomenon is most clearly apparent in sounds made by artificial sources. Another interesting finding from …

    ubc Repository record for An acoustical study of the properties and behaviour of sea ice (opens in a new tab) Download PDF for An acoustical study of the properties and behaviour of sea ice (opens in a new tab)

  20. Vibration of Periodic Drillstrings with Local Sources of Resonance

    … while operating under the influence of “slip-stick” frictional torques between the drill-bit at the rock surface, “bit-bounce” which make the drill-bit to intermittently lose contact with the rock surface, and the motion of the bit in the Bore-Hole Assembly “bit in BHA”. Experimental …

    maryland Repository record for Vibration of Periodic Drillstrings with Local Sources of Resonance (opens in a new tab)

Page 1 of 2