Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Slope Error"”.
-
Surface Metrology Methods for X-ray Telescope Mirrors, Freeforms, and Heliostats
… to measure optical freeforms with surface slopes up to 50 degrees without the need for tilting of the probe tip to be normal with the surface. This allows for simple stage geometry and can accurately measure steep internal optical surfaces. I will discuss the system design and show current …
-
Fluence spectra of heavy ions on thick targets with model comparison
… charge z. For complete agreement the expected slope is unity. A linear regression is applied to the data and the resulting slope is compared to unity by means of a percent error. For the 5 and 10 g/cm<sup>2</sup> graphite-epoxy targets a slope error value of 10.6% and 7.8% were calculated …
-
Optical performance of solar power towers with conical secondary concentrators
… north facing fields and were more resilient to slope error. Conical secondary concentrators are a viable alternative to compound parabolic concentrators and have more variability in both concentration ratio as well as acceptance angle. A design map is presented to allow for cones to match either …
-
Considerations in the design and operation of synchrotron radiation beamlines (including a discussion on the properties of synchrotron radiation
… as an elastically bent beam. Deflection and slope error equations are developed which relate the shape of the bent mirror to its ideal surface. Visible light diffraction patterns collected from the mirror helped to establish operating conditions which provide good collimation. When the …
-
Experiments and Impedance Modeling of Liners Including The Effect of Bias Flow
… groups that minimized the least squares slope error between predictions and experiments. The result of the fit indicated that terms not associated with bias flow required a greater degree of correction than the terms associated with the bias flow. This model improved agreement with …
-
Geometrical Optimisation of Receivers for Concentrating Solar Thermal Systems
… the major role played by concentrator surface slope error in lowering the exergy in concentrated solar thermal systems and quantifies the exergy loss associated with non-ideal match between flux and surface temperature in receivers.
-
Phase measurement accuracy limitation in phase shifting interferometry.
… transducer (PZT) calibration (i.e. PZT slope error) and PZT nonlinearity, vibration, spurious reflection, source bandwidth, detector nonlinearity, and detector noise. The effects of these error sources on several algorithms to solve the phase of the wavefront are studied. When the simple …
-
Ultra-Precision Non-Contact Metrology for Optical Shop and Alignment Applications
… systems. For measurement of low-order surface error and prescription parameters, when compared to interferometry and other optical shop techniques that rely on optical path difference or slope error, these techniques have greater dynamic range and, in some cases, precision that approaches the …
-
A statistical evaluation of six classes of hydrocarbons: which classes are promising for future biodegraded ignitable liquid research?
… of determination values, the standard error of the estimate, the slope, and the slope error of the best fit line were assessed to draw conclusions regarding which classes exhibited desirable characteristics, relative to the other classes, such as a linear degradation, low variation in …
-
A Novel Approach to X-ray Mirror Bending Stability and Control
A novel, no-contact approach to X-ray mirror bending control is presented here, proposed for use on the beamlines of the European X-ray Free Electron Laser (XFEL) project. A set of mirrors with tunable bending radii are desired, that will maintain their optical properties even as the beam incidence …
-
Modelling and Simulation of Gearset Behavior : Effects of Manufacturing Errors and Electrification
… simulates meshingof gears with manufacturing errors (ME). Contact is found from common normal directions together with acompliance condition, instead of using a predetermined load distribution. The LTCA accounts for non-Hertzianpressure, contact outside the nominal line of action (LOA), and …