Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Slot Jet"”.

  1. Wake of slot jet studies.

    Flow patterns developed by the inclined slot air jets, injected in a main air stream flowing at different velocities from 132.5--208 feet per second in a four0inch square duct, were studied from numerous pressure probe readings. Velocity profiles across the width of the duct at various positions …

    ottawa-retro Repository record for Wake of slot jet studies. (opens in a new tab)

  2. Influence of Transverse Slot Jet on Premixed Flame Acceleration

    … square channel. A transverse fluidic jet was used as an active flow blockage mechanism and to introduce turbulence into the propagating flame. Three experimental parameters were used to examine the relative influence of (1) mixture reactivity defined here as system equivalence ratio …

    ucf Repository record for Influence of Transverse Slot Jet on Premixed Flame Acceleration (opens in a new tab)

  3. Heat Transfer Analysis of Slot Jet Impingement onto Roughened Surfaces

    The effect of surface roughness on jet impingement heat transfer was investigated in this research. A numerical analysis was conducted for free surface slot jet impinging normally onto a heated plate. Six different geometries and three different plate materials were investigated. The cooling fluid …

    usf Repository record for Heat Transfer Analysis of Slot Jet Impingement onto Roughened Surfaces (opens in a new tab)

  4. High Speed Impinging Jet Plating: Slot Jet and Through-Hole Plating

    The characteristics of two different impinging jet plating systems was investigated in this study. The local mass transfer rates for slot jet system were measured with use of sectioned electrode technique and were compared with the other previous studies. Based on the measured mass transfer …

    uiuc Repository record for High Speed Impinging Jet Plating: Slot Jet and Through-Hole Plating (opens in a new tab)

  5. Fluid Flow Characteristics of a Co-Flow Fluidic Slot Jet Thrust Augmentation Propulsion System

    … slip stream air passed through high performance slot jets is proposed and analysis of the fluid characteristics is presented in this report. The test section for the experiment is developed using 3D printed ABS plastic airfoils modified with internal cavities where pressurized air is introduced …

    ucf Repository record for Fluid Flow Characteristics of a Co-Flow Fluidic Slot Jet Thrust Augmentation Propulsion System (opens in a new tab)

  6. Performance Characteristics of Fluidic-Based Thrust Augmentation Using a Slot Jet for Unmanned Aerial Vehicle Propulsion

    … understanding the underlying fluid dynamics of a slot jet through the use of flow entrainment for thrust augmentation with the application to be integrated into a novel UAV system with no external moving parts. Current publicly available quadcopter rotor design type aircraft were used as a basis …

    odu Repository record for Performance Characteristics of Fluidic-Based Thrust Augmentation Using a Slot Jet for Unmanned Aerial Vehicle Propulsion (opens in a new tab)

  7. EXPERIMENTAL AND NUMERICAL STUDY OF CONTINUOUS GALVANIZING GAS JET WIPING VIA A MULTI-SLOT AIR KNIFE

    … investigates a novel configuration of a multi-slot jet, through numerical simulation and experimental measurements, for coating thickness reduction and noise elimination in the continuous galvanizing gas jet wiping process. Gas jet wiping is an effective hydrodynamic method for controlling the …

    mcmaster Repository record for EXPERIMENTAL AND NUMERICAL STUDY OF CONTINUOUS GALVANIZING GAS JET WIPING VIA A MULTI-SLOT AIR KNIFE (opens in a new tab)

  8. Numerical Investigation of Multiple-Impinging Slot Jets in the Gas-Jet Wiping of Liquid Zinc Coatings

    <p>A turbulent impinging slot jet is a device which is used in various industrial applications such as glass tempering, heating of complex surfaces, cooling of turbine blades, cooling of electronic devices and in the continuous hot-dip galvanizing line, which is the focus of this study. An …

    mcmaster Repository record for Numerical Investigation of Multiple-Impinging Slot Jets in the Gas-Jet Wiping of Liquid Zinc Coatings (opens in a new tab)

  9. Cooling by a Mist Steam Jet

    … studies on mist/steam heat transfer of confined slot jet impingement have been performed with a focus to investigate the heat transfer enhancement by injecting water mists into steam jet impingement flow. Efforts have also been made to reveal the enhancement mechanism. The mist/steam flow was …

    clemson Repository record for Cooling by a Mist Steam Jet (opens in a new tab)

  10. The effect of boundary layer blowing in the corner region of a linear compressor cascade wind tunnel

    … boundary layer blowing investigations, two slots were machined into the ends of a set of cascade blades, and an external air source was used as the blade slot jet air source. Tests were done for 19, 21, and 23 degrees angle of attack. The main effect of corner boundary layer blowing was a …

    vt Repository record for The effect of boundary layer blowing in the corner region of a linear compressor cascade wind tunnel (opens in a new tab)

  11. Acoustic investigation of upper surface blown flaps

    … experimentally. The blown flap was modeled by a slot nozzle exhausting over a plane flap and measurements were made in the free field and in a reverberation room. Flap length, flap deflection angle, nozzle aspect ratio and the jet exit Mach number were among the parameters that were varied. …

    utk-theses Repository record for Acoustic investigation of upper surface blown flaps (opens in a new tab)

  12. Cooled Vane Heat Transfer

    … during the spring of 2016. In the project, jet impingement cooling with application to a cooled turbine inlet guide vane was studied with the purpose of developing and validating a model for the thermal load of the vane. As a start, a 2D model of a single slot jet was created and the …

    chalmers Repository record for Cooled Vane Heat Transfer (opens in a new tab)

  13. Low-order modelling for feedback control of fluid flows around complex geometries

    … technique to a 2D backward facing step flow. Slot jet actuation on the rear edge is assumed, and two separate output configurations are considered. The resulting models are compared to models obtained in a computational system iden- tification study, which prompts an interesting investigation …

    whiterose Download PDF for Low-order modelling for feedback control of fluid flows around complex geometries (opens in a new tab)

  14. A study of the interaction between an underexpanded normal jet and a hypersonic free stream

    … interaction between an underexpanded normal jet and a hypersonic cross flow has been studied experimentally. Although the main context of the work is reaction control, many fundamental aspects of the interaction flow field have been included. Experiments were performed in the Southampton …

    soton Download PDF for A study of the interaction between an underexpanded normal jet and a hypersonic free stream (opens in a new tab)

  15. Numerical Investigation of Flow Dynamics Over a Multi-Element Airfoil in Ground Proximity

    … toward the flap, we observe a periodic slot jet flow between the trailing edge of the main element and the flap. The separation bubble in the slat cove region is significantly smaller in ground proximity than in the free-stream case from earlier work, indicating that ground effect …

    ottawa-retro Repository record for Numerical Investigation of Flow Dynamics Over a Multi-Element Airfoil in Ground Proximity (opens in a new tab)

  16. Experimental analysis of coherent structures in a plane confined jet

    Confined jets are commonly employed in several industrial applications such as propul-sion systems in the aerospace industry and environmental control systems. In the presentstudy, the flow development of a high aspect ratio, planar confined jet is studied. Thevelocity field is measured using …

    waterloo Repository record for Experimental analysis of coherent structures in a plane confined jet (opens in a new tab)

  17. Numerical study of high speed separated flows

    … interaction. Supersonic flows with jet injection, compression ramp and cavity, either individually or in combination, are numerically studied by solving directly the compressible Navier-Stokes equations to better understand the transition of high speed laminar boundary layer to …

    soton Download PDF for Numerical study of high speed separated flows (opens in a new tab)

  18. A direct numerical simulation study of a turbulent non-premixed lifted flame

    A turbulent lifted slot-jet flame is studied using direct numerical simulation (DNS). A one- step chemistry model is employed with a mixture-fraction dependent activation energy which can reproduce qualitatively the dependence of laminar burning rate on equivalence ratio that is typical of …

    unsw Repository record for A direct numerical simulation study of a turbulent non-premixed lifted flame (opens in a new tab)

  19. Steady and Transient Heat Transfer for Jet Impingement on Patterned Surfaces

    Free liquid-jet impingement is well researched due to its high heat transfer ability and ease of implementation. This study considers both the steady state and transient heating of a patterned plate under slot-free-liquid jet impingement. The primary working fluid was water (H2O) and the plate …

    usf Repository record for Steady and Transient Heat Transfer for Jet Impingement on Patterned Surfaces (opens in a new tab)