Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 62 for “"Slurry flow"”.

  1. Slurry Flow Measurement Using Coriolis Flowmeters

    This thesis describes a novel methodology for slurry flow measurement using Coriolis flowmeters incorporating error compensation and structural condition monitoring techniques. This work investigates the influence of entrained solid particles on Coriolis flow metering along with the potential wear …

    kent Download PDF for Slurry Flow Measurement Using Coriolis Flowmeters (opens in a new tab)

  2. Heat Transfer in Coal Water Slurry Flow

    … heat transfer coefficient of coal water slurry flowing turbulently in a horizontal heated pipe was measured. The values of heat transfer coefficients from different slurry concentrations and flow rates were correlated using two approaches: the Dittus-Boelter type equation, and an analogy …

    nodak Repository record for Heat Transfer in Coal Water Slurry Flow (opens in a new tab)

  3. Modelling In-line Slurry Flow Sediment Extraction with Multiphase CFD

    … in-line sediment extraction within dredging slurry flows to enable real-time separation inside the pipeline using Computational Fluid Dynamics (CFD) modeling in ANSYS Fluent. An Eulerian multiphase model is employed to simulate interactions between water and solids. The first approach models …

    tamu Repository record for Modelling In-line Slurry Flow Sediment Extraction with Multiphase CFD (opens in a new tab)

  4. Measurement and visualisation of slurry flow using electrical resistance tomography

    Slurry transport has been a progressive technology for transporting a huge amount of solid materials across the world in both, long distance and short commodity pipelines. The occurrence of separation and slippage of the constituent phases within the pipeline make these flows unpredictable and time …

    whiterose Download PDF for Measurement and visualisation of slurry flow using electrical resistance tomography (opens in a new tab)

  5. Analysis of Acoustic Signals Generated by Proppant Slurry Flow Through Perforations

    … the acoustic signal generated when a water/sand slurry flows through perforations in the frequency domain. The goal is to identify the effect of sand on distributed acoustic sensors (DAS), and therefore to allocate sand concentration during a multi-stage fracture treatment using DAS monitoring …

    tamu Repository record for Analysis of Acoustic Signals Generated by Proppant Slurry Flow Through Perforations (opens in a new tab)

  6. Numerical Study Of Encapsulated Phase Change Material (epcm) Slurry Flow In Microchannels

    Heat transfer and flow characteristics of phase change material slurry flow in microchannels with constant heat flux at the base were investigated. The phase change process was included in the energy equation using the effective specific heat method. A parametric study was conducted numerically by …

    ucf Repository record for Numerical Study Of Encapsulated Phase Change Material (epcm) Slurry Flow In Microchannels (opens in a new tab)

  7. Slurry flow measurement using Coriolis flowmeters incorporating analytical and data-driven modelling

    Coriolis flowmeters are effective for single-phase flows; however, their accuracy degrades in case of multiphase flows. Slurry is a complex multiphase flow and limited studies have been conducted for slurry flow metering using Coriolis flowmeters. In this study, a review of the existing slurry flow …

    kent Download PDF for Slurry flow measurement using Coriolis flowmeters incorporating analytical and data-driven modelling (opens in a new tab)

  8. Control Of Slurry Flow, Temperature And Aggressive Diamonds In Chemical Mechanical Planarization

    … of studies related to the study and control of slurry flow, process temperature, and aggressive diamonds in Chemical Mechanical Planarization (CMP). The purpose of these studies is to better understand the fundamentals of CMP and to explore solutions to some of CMP’s greatest challenges. …

    arizona-thes Repository record for Control Of Slurry Flow, Temperature And Aggressive Diamonds In Chemical Mechanical Planarization (opens in a new tab)

  9. NUMERICAL SIMULATION OF LIQUID-SOLID SLURRY FLOW USING THE EULERIAN-EULERIAN TWO-FLUID MODEL

    … a Two-Fluid Model (TFM) developed for gas-solid flow in predicting liquid-solid flow, as well as a TFM specifically modified for liquid-solid flow. The physics involved in gas-solid and liquid-solid flows are intuitively different, and some model terms that can be neglected in a gas-solid …

    sask Repository record for NUMERICAL SIMULATION OF LIQUID-SOLID SLURRY FLOW USING THE EULERIAN-EULERIAN TWO-FLUID MODEL (opens in a new tab)

  10. Numerical investigation on heat transfer performance enhancement of binary PCM slurry flow boiling process in microchannels

    … Among various cooling methods, refrigerant flow boiling in microchannels holds promise due to its potential advantages over those conventional approaches. Nevertheless, it confronts challenges such as the elevated pressure drop, diminishing heat transfer efficiency along flow direction, and …

    birmingham Download PDF for Numerical investigation on heat transfer performance enhancement of binary PCM slurry flow boiling process in microchannels (opens in a new tab)

  11. Tribological, Kinetic and Thermal Characteristics of Copper Chemical Mechanical Planarization

    … conditioning, pressure, sliding velocity, slurry flow rate and temperature. A slight variance in each of these parameters will cause significant change in polising results. Various investigations are performed during this study to understand the effect of consumables and other main …

    arizona-thes Repository record for Tribological, Kinetic and Thermal Characteristics of Copper Chemical Mechanical Planarization (opens in a new tab)

  12. Pipeline transportation of lignite slurry.

    … drop and critical velocity for lignite water slurry flow through a horizontal two inch (nominal) black iron pipe was investigated. The mean slurry velocity ranged from 3 to 7 ft/s, and the range of solid concentration investigated was from 0 to 25 percent (wt.). The experiment was performed …

    nodak Repository record for Pipeline transportation of lignite slurry. (opens in a new tab)

  13. Slurry transport modelling and applications in the gravel packing process

    A three-layer model for solid-liquid flow in inclined pipes is developed. The steady-state model predicts the frictional pressure loss, critical velocity, concentration profile in the heterogeneous layer, mean heterogeneous layer and moving bed layer velocities, and bed layer heights for each set …

    ubc Repository record for Slurry transport modelling and applications in the gravel packing process (opens in a new tab) Download PDF for Slurry transport modelling and applications in the gravel packing process (opens in a new tab)

  14. Experimental hydrodynamic study of the slurry distribution in a vertical slurry heat exchanger

    A slurry heat exchanger is simulated as part of the Solvent Refined Coal-I plant to preheat the coal and solvent slurry before hydrogen injection. The shell and tube heat exchanger is oriented vertically with upward slurry flow on the tube side to minimize the localized solid sedimentation in …

    unlv Repository record for Experimental hydrodynamic study of the slurry distribution in a vertical slurry heat exchanger (opens in a new tab) Download PDF for Experimental hydrodynamic study of the slurry distribution in a vertical slurry heat exchanger (opens in a new tab)

  15. Modeling Proppant Transport in Hydraulic Fractures and Fracture Networks: Applications in Petroleum and Geothermal Reservoir Development

    … processes, including fracture deformation, slurry flow, proppant transport, and heat transfer, within a unified simulation environment. Different numerical methods are employed to address the complexities of this multi-physics system. A three-dimensional displacement discontinuity method (3D …

    oklahoma-thes Repository record for Modeling Proppant Transport in Hydraulic Fractures and Fracture Networks: Applications in Petroleum and Geothermal Reservoir Development (opens in a new tab) Restricted access

  16. Concentration Variations and Their Effects in Flowing Slurries and Emulsions

    Two aspects of two-phase pipe flow were investigated in this study: the concentration fluctuations which occur during flow and the inward migration of the particles or droplets which form the dispersed phase. The concentration fluctuation spectrum study was undertaken to better understand slurry …

    sask Repository record for Concentration Variations and Their Effects in Flowing Slurries and Emulsions (opens in a new tab)

  17. Process Optimization and Consumable Development for Chemical Mechanical Planarization (CMP) Processes

    … the effect of pad conditioning temperature and slurry flow rate on tribology and post CMP characteristics; development of novel slurries using polymer hybrid particles and improvement in slurry metrology to reduce surface damage during CMP. From the current research, it was shown that the effect …

    usf Repository record for Process Optimization and Consumable Development for Chemical Mechanical Planarization (CMP) Processes (opens in a new tab)

  18. Chemical Mechanical Planarization of Electro-Plated Copper Through-Wafer Interconnects

    … key variables associated with CMP. As a result slurry chemistry, certain machine parameters and the type of pad used all surfaced as having a primary influence on removal rate and uniformity, In the second DOE, slurry chemistry effects were investigated more in-depth with a strong interaction …

    boise Repository record for Chemical Mechanical Planarization of Electro-Plated Copper Through-Wafer Interconnects (opens in a new tab)

  19. Utilisation of Resolved Computational Fluid Dynamics and Discrete Element Method Simulations to Select Optimum Sand Screen Designs for Oil and Gas Wells

    … particle interactions at screen apertures to flow through a deposited filter-bed. Few studies also connect this filtration process to the mechanical loading imposed on screen wires. This thesis uses immersed-boundary resolved computational fluid dynamics-discrete element method (CFD-DEM) …

    unsw Repository record for Utilisation of Resolved Computational Fluid Dynamics and Discrete Element Method Simulations to Select Optimum Sand Screen Designs for Oil and Gas Wells (opens in a new tab)

Page 1 of 4