Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Slurry injection"”.
-
Reservoir screening criteria for deep slurry injection
Deep slurry injection is a process of solid waste disposal that involves grinding the solid waste to a relatively fine-grained consistency, mixing the ground waste with water and/or other liquids to form slurry, and disposing of the slurry by pumping it down a well at a high enough pressure that …
-
Selectively anisotropic continuous fibre ceramic composites via slurry injection
… such anisotropic ceramic composites via injection of ceramic suspensions. The injection method is developed from previous work and literature to investigate the ability to place deposits selectively within a fibre architecture to build up a ceramic composition gradient. A series of such …
-
Characterization and optimization of ice-slurry injection through intravascular catheters
OBJECTIVES: Ice slurry injection has been proven to be an effective method for non-invasive fat removal. In contrast to conventional cryolipolysis with topical cooling, it is more time-efficient, customizable and able to target lipid rich tissue, such as fat or myelin sheaths around nerves, …
-
Evaluation of slurry injection for the determination of metals in solid samples using inductively coupled plasma atomic emission spectrometry
… added to alter such physical properties of the slurry as surface tension, viscosity, and aerosol droplet size. Mixed gas plasma containing small amounts of nitrogen were used. Results showed that, by adding about 5 ppm of PEO, the emission intensity of an analyte increased significantly. Further …
-
Studies of Heparin Variants in Sepsis-Associated Immunothrombosis
… (10-12 weeks old) received an intraperitoneal injection of rat fecal slurry to induce sepsis. Heparins were injected in therapeutic doses at various time points (2/4 hr, 8 hr, 12 hr, and 16 hr post-slurry injection). We assessed survival, physiological and hematology parameters, bacterial …
-
Control Of Slurry Flow, Temperature And Aggressive Diamonds In Chemical Mechanical Planarization
… of studies related to the study and control of slurry flow, process temperature, and aggressive diamonds in Chemical Mechanical Planarization (CMP). The purpose of these studies is to better understand the fundamentals of CMP and to explore solutions to some of CMP’s greatest challenges. …
-
AMMONIA EMISSIONS FROM ARABLE LANDS IN PO VALLEY: METHODOLOGIES, DYNAMICS AND QUANTIFICATION.
… Italian context. Moreover emissions from cattle slurry and urea application were performed in seven field trials in three different locations of Po Valley, in order to evaluate the best practices in reducing NH3 loss from arable land. The emission factors relative to different agronomical …
-
Effect of fluid viscosity and density on proppant transport in complex slot systems, The
… proppant sizes, proppant concentrations, and slurry injection rates on proppant transport were then investigated. This experimental work was performed using a laboratory size slot apparatus at the Colorado School of Mines. Four different proppants were tested, 100 mesh sand (2.65 sp.gr), 40/70 …
-
Process Optimization and Fundamental Consumables Characterization of Advanced Dielectric and Metal Chemical Mechanical Planarization
… of this dissertation is the development of a slurry film thickness quantification technique using ultraviolet-enhanced fluorescence. The technique is developed to measure slurry film thickness at any location of interest. In the next study of this dissertation, this new technique is applied to …
-
Fundamental Consumables Characterization of Advanced Dielectric and Metal Chemical Mechanical Planarization Processes
… technique is implemented to study the effect of slurry injection position for optimum slurry usage. It is known that the performance of chemical mechanical planarization depends significantly on the polishing pad and the kinematics involved in the process. Variations in pad material and pad …
-
NEW INSIGHTS INTO POST-SEPSIS MUSCLE WEAKNESS ELUCIDATED USING A NOVEL ANIMAL MODEL
… (Aim 1). This aim involved refining the cecal slurry injection model of polymicrobial sepsis in young adult animals, as well as optimizing the timing, duration, and dose of multiple therapeutic agents. The resulting resuscitation protocol was adapted for use in late-middle-aged animals, and …
-
Coupled 3-d numerical simulation of proppant transport and fluid flow in hydraulic fracturing
… and involves fluid mechanics for the part of slurry injection, fluid flow, fluid leak-off, proppant transport, proppant settling and interaction between fluid and proppant particles. In this study, the focus is on fluid and proppant motion within hydraulic fractures. The effectiveness of …
-
Slurry Mean Residence Time Analysis and Pad-Wafer Contact Characterization in Chemical Mechanical Planarization
… presents a series of studies related to the slurry mean residence time analysis and the pad-wafer contact characterization in Chemical Mechanical Planarization (CMP). The purpose of these studies is to further understand the fundamentals of CMP and to explore solutions to some of CMP's …
-
Investigating the effects of environmental microbial exposure on the sepsis-induced immune response
… CoH, and pet store mice after intra-peritoneal injections of either LPS or cecal slurry (CS) to identify potential differences among these mouse groups and better understand why CoH mice experience increased mortality during sepsis. A baseline experiment was performed on each of these mice …
-
Investigation of the Geomechanical Controls on Hydraulic Fracturing in the Bakken Formation, Southeast Saskatchewan
… wireline logs, and diagnostic fracture injection tests. Next, multistage hydraulic fracturing of horizontal production wells was simulated using the commercial hydraulic fracture simulator Gohfer©, using actual treatment schedules as input and using pressure data to verify the model. …
-
Odour and greenhouse gas emissions from manure spreading
… than concentrations from broadcast applications. Injection seemed to have a larger impact on reducing odours from solid manure than liquid manure, mainly due to efficient manure coverage from solid manure injection. Odours measured immediately after solid manure applications were also 37% lower …
-
Effects of rates and methods of swine slurry application on crop N uptake and N distribution in the soil
… of application of anaerobically stored swine slurry on the availability and distribution of N in the root zone. Swine slurry ranging from 3.30 to 4.98% dry matter was applied to a silt loam soil prior to seeding silage corn (Zea mays L.). Rates supplying 0, 173, 321 and 653 kg ha⁻¹ of total N …
-
Volume Changes during Fracture Injection of Biosolids
… A new and innovative technology, deep biosolids injection, is proposed for the treatment of biosolids and is to be implemented by Los Angeles where the City has been granted underground solids injection control permits under Class V wells by the US Environmental Protection Agency. Deep biosolids …
-
Experimental and modeling evaluation of proppant transport in complex fractures
… type, size, density, the fluid viscosity and the slurry injection rate. The fracturing fluid and the proppants affect the productivity and conductivity of the complex fracture network created by the HF process. A 2015 study by Alotaibi at the Colorado School of Mines used inter-connected …
-
Effects of climate change and management on biogeochemical N turnover, slurry N use efficiency and associated pedosphere-atmosphere-hydrosphere exchange of N compounds in montane grasslands
… scenarios (extensive vs. intensive broadcast slurry management) were applied to the translocated intact grassland plant-soil systems. Climate change as well as management intensification treatments were combined with (a) 15N stable isotope labelling of slurry to trace the fate of fertilizer-N …
Page 1 of 2