Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Sm(Co"”.
-
Structural, magnetic and microstructural studies of composition-modified Sm-Co ribbons
… microstructures in hard magnetic materials. Sm-Co-based magnets, bearing superior intrinsic magnetic properties, are good candidates for further development. Two Sm-Co-based alloys, (Sm12Co88)100-x-yCr yCx (taking SmCo7 phase) and SmCo4-xFe xB (a derivative of SmCo5 phase), were produced …
-
Magnetic Thin Films With High Perpendicular Anisotropy For Magnetic Recording Media Applications
… in future extremely high density magnetic recording, magnetic materials with high magnetocrystalline anisotropy constant (Ku) are needed. In this thesis work, the two most-promising candidates of high Ku materials, i.e. CaCu<sub>5</sub>-type Sm(Co, Cu)<sub>5</sub> and L1<sub>0</sub>-type FePt …
-
Magnetism of nanostructured permanent -magnet materials
Sm2Co17-type high-temperature permanent magnets with composition Sm(Co, Fe, Cu, Ti)z are investigated. The effects of Ti (or Zr), Cu, Fe and z value, as well as the effect of heat treatment on the magnetic properties are reported. Ti is found a necessity to form the cellular microstructure with …
-
Aperfeiçoando as Propriedades de Imãs Permanentes de SmCo5
Sm-Co thin films, with nominal stoichiometry SmCo5, where deposited, by sputtering, on Si substrate (1 0 0) with different buffer layers (Cu, Cr and Ta). The microstructure and the magnetic properties were investigated. The coercivity values of Sm-Co films, with Cr and Cu buffers were similar to …
-
Magnetisation reversal in permanent magnet materials
… isotropic melt-spun Nd-Fe-B powder, and in Sm-(Co,Cu,Fe,Zr) 2:17 anisotropic powder. Magnetisation measurements have been performed using vibrating sample magnetometers, a permeameter, and an adapted pulsed field magnetometer. Magnetisation reversal is explained in terms of domain wall …
-
n-Type Thermoelectric Oxide Ceramics for High Temperature Power Generation
Conventional non-oxide materials utilised in thermoelectric devices have unfavourable properties such as instability at high temperatures with scarce and toxic raw materials that constitute an environmental hazard. Transition metal oxide thermoelectric materials are stable at high temperatures, …
-
Síntese e caracterização de nanopartículas magnéticas do sistema binário samário cobalto
… chemical polyol method for the preparation of Sm-Co nanoparticles. The synthesized samples were named in the following forms: ARS-0%; ARS-5%, ARS-7% and ARS-9%, being the percentages referring to the variation of Acetic Acid used in the synthesis. The structural characterization was performed …
-
Studies of the magnetic properties and microstructures of two rare earth-transition metal type magnetic alloys
… of two types of magnetic alloys based on Sm(Co,Cu,Fe,Zr)\(_z\) (z = 7.4) and Nd\(_{15}\)Fe\(_{77}\)B\(_8\) has been carried out. The optimum heat treatment which gave the best magnetic properties for the Sm(Co,Cu,Fe,Zr)\(_z\) alloy depended primarily on the sintering and solid solution …
-
Crystal structure, microstructure and magnetic properties of rapidly solidified samarium-cobalt based alloys
The SmCo-based permanent magnets are drawing much more attention since the early 1970's for their highly attractive features such as, high energy product (15 MGOe–30 MGOe), reliable coercive force, best temperature characteristics and excellent corrosion and oxidation resistance. These interesting …
-
Glass forming ability and magnetic characteristics of rare earth - Transition metal alloys
… were studied. RE60TM30MT10 alloys with RE = Nd, Sm, Dy, Gd, TM = Fe, Co and MT = Al, B, Si were prepared. Only substitutions by B and Si retained both the good GFA and hard magnetic properties at room temperature. Fully amorphous alloy Sm60Co30Al10 was paramagnetic at room temperature. Unique …
-
Σύνθεση και μελέτη δομικών και μαγνητικών ιδιοτήτων νέων διαμεταλλικών ενώσεων σπάνιας γαίας - μεταβατικών μετάλλων για εφαρμογές μόνιμων μαγνητών σε υψηλές θερμοκρασίες
The Sm2Co17-based magnets are known for their large maximum energy product (BH)max and high temperature operation. A series of recent studies has been focused on the composition adjustment of Sm(Co,Fe,Cu,Zr)7.5-8.5 magnets to optimize them for high temperature applications. In these magnets the …
-
Comparing the Incidence and Prevalence of Oral Microbial Pathogens Selenomonas Noxia and Streptococcus Mitis within the UNLV-SDM Clinical Patient Population
… is a gram-negative, anaerobic bacteria, which contributes to development and progression of periodontal disease. Some evidence now suggests Streptococcus mitis (SM), a gram-positive, facultative bacterium contributing to the etiology of dental caries and periodontal disease, may also influence …
-
A competence-based system for recommending study materials from the Web
… such systems have some drawbacks such as inconsistency when estimating a learner's knowledge level, and a lack of a pedagogically informed approach to teaching and learning. These drawbacks may be addressed by a competency model. Such a model has the benefits of an improved pedagogical …
-
Spark Plasma Sintering as a powder processing route for pre-alloyed Sm2(Co, Fe, Cu, Zr)17 permanent magnets
… of increasing the bulk resistivity of a REPM, Sm(Co, Fe, Cu, Zr)8.2 (henceforth referred to as Sm2(Co, Fe, Cu, Zr)17), through the addition of an electrically insulating material, CaF2, to form a rare earth composite permanent magnet is studied. The aim of increasing the bulk resistivity is to …
-
A study of time-resolved high-temperature structural order -disorder transformations in rare earth-transition metal intermetallics with 2-17 stoichiometry
… and the understanding of its mechanism is critical. The order-disorder transformation involves the arrangement of transition metal “dumbbell” pairs in the structure. In the disordered state, obtained via rapid solidification, the TbCu7-type structure forms where the dumbbells are …
-
Microstructure and Texture of Yttrium-Nickel-Borocarbide and Samarium-Cobalt Thin Films
… of Yttrium-Nickel- Borocarbide and Samarium-Cobalt thin film heterostructures prepared by Pulsed Laser Deposition and to establish structure-property relations for these materials in order to improve their properties and design new structures. Coincidence site lattice epitaxy was explored in …
-
Geochemical Evolution of Ferruginous Bauxite Deposits in Northwestern Oregon and Southwestern Washington
… bauxite deposits developed from flows of the Columbia River Basalt Group in northwestern Oregon and southwestern Washington. Samples of the iron pisolite and the gibbsite nodular zones from the upper portion of the weathering profile of drill core from Columbia County, Oregon and Cowlitz …