Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"Smeared crack"”.
-
A Critical Evaluation of Computational Fracture Using a Smeared Crack Approach in MPM
An evaluation of the smeared crack representation of material failure using the material-point method (MPM) as a feasible computational failure approach is performed. The spatial descretization in MPM is defined by a grid of cells that represent space and a set of points that represent the …
-
A comparative study on the modeling of matrix cracking in fiber-reinforced polymer laminates under transverse compression - XFEM versus a smeared crack approach
… a comparative study on the modeling of matrix cracking in FRP laminates under transverse compression is carried out. To do so, an eXtended Finite Element Method (XFEM) approach is developed for discrete crack modeling, and the conventionally used smeared crack approach is applied via an …
-
Modelling of transport processes involved in service life prediction of concrete: important principles
… the stress-deformation state using the so-called smeared crack approach.
-
Behaviour of critical regions of concrete slabs under impulsive loading
… the simulation of impact loads, plasticity and cracking of concrete. An assessment is made for perforation and scabbing. An attempt has been made to analyse the local failure of reinforced concrete slabs subjected to soft missile impact by using three-dimensional dynamic finite element analysis …
-
A Mesh Objective Algorithm for Modeling Mode-I Cracks Using a Standard Finite Element Formulation
… mesh objective algorithm for modeling mode-I cracks is developed and implemented within a standard finite element formulation. The algorithm applies the crack opening displacements across the standard nodal degrees of freedom that is consistent with formalism of the conventional smeared crack …
-
MODELLING PROGRESSIVE FAILURE OF LAMINATED COMPOSITE STRUCTURES
… node method (A-FNM) and adaptive discrete-smeared crack (A-DiSC) method. The former introduces an adaptive refinement and coarsening scheme to simplify the modelling procedure and reduces computational cost. In the A-DiSC model, an adaptive integrated discrete/smeared formulation is …
-
Numerical Modelling of Scale-Dependent Damage and Failure of Composites
… and over-estimation in strength predictions. A smeared crack model with cohesive elements between plies can reliably predict the failure mode, but not the strength, for laminates failed by delamination. A floating node method is developed for explicitly modelling multiple discontinuities within …
-
EFFECTS OF PLY-BLOCKING ON THIN-PLY LAMINATED COMPOSITES
… element models (2D cross-ply, shell, and 3D smeared crack models) were used to analyse damage evolution and delamination. It was shown that interlaminar shear stresses increase with ply thickness, leading to greater delamination. The shell model under-predicted ultimate strength, but gave …
-
Experimental and Numerical Assessment of the Seismic Performance of an Innovative Retrofit Scheme for Infilled RC Frames
… modeling scheme, which combines the discrete and smeared-crack approaches to capture the different failure modes of the infilled RC frames, is adopted. A previously proposed smeared-crack model is used to represent the diffused cracking and crushing in concrete and masonry under cyclic loads. …
-
Análisis no lineal elástico en vigas de concreto a través del Modelo Fijo de Grietas Dispersas
… se basa en el Método de Grietas Dispersas (Smeared Crack Approach) de la Mecánica de Fractura, el cual será evaluado dentro de un algoritmo de análisis considerando el Método de Elementos Finitos. El objetivo principal es proponer un modelo computacional para el cálculo de deflexiones …
-
Ανάπτυξη και πειραματική βαθμονόμηση καταστατικού προσομοιώματος άοπλης τοιχοποιίας υπό σεισμική καταπόνηση
… method. In this study the uniaxial total strains smeared crack model is proposed and the stress- strain curves under tension, compression and shear are described for static and cyclic loads. Additional, a methodology is presented for the calibration of material parameters that required by the …
-
Numerical modelling of reinforced concrete bridge pier under artificially generated earthquake time-histories
… well with the EC8 one. Two Finite element (FE) smeared crack models, named Multi-crack and Craft, are well validated against experimental data of concrete and Reinforced concrete (RC) structures under monotonic and cyclic loadings. They are then used in the analysis of RC bridge piers under the …
-
Integrated mixed-mode fracture model for the design of 2D steel fibre reinforced concrete structures
… software. Initially, the existing multi-fixed smeared crack model approach in the FEMIX software is used in combination with the constitutive models currently available to conduct a set of numerical case studies of FRC elements failing in bending and shear to analyse the influence the fracture …
-
Constitutive Modelling and Finite Element Analysis of Concrete Structures with Regard to Environmental Influence
… Tensile fracture is described using a smeared crack approach where the fracrure energy is considered and the shear stiffneess in the cracked region is gradually reduced as crackling develops. Environmentally induced strain due to variation of moisture and temperature is taken into …
-
Constitutive models for the material nonlinear analysis of concrete structures including time-dependent effects
… types of structures, a multi-directional fixed smeared crack model for plane shells has been developed. This model implements an innovative approach for capturing the behavior of laminar structures failing in punching, which is based on the adoption of a softening diagram to simulate the …
-
Tension stiffening effect in GFRP reinforced concrete elements
… distribution function to represent bond between cracks. This formed the basis for the development of a comprehensive model to analyse the tension stiffening behaviour of direct tension tests. After evaluating the tension stiffening test results against existing code-based formulations, the …
-
Evaluation of Elastic-Plastic and Damage Models for Ultra High Performance Concrete (UHPC)
… and UHPC. The models evaluated were the Concrete Smeared Crack (CSC) model and Concrete Damage Plasticity (CDP) model in ABAQUS, and the Continuous Surface Cap Model (CSCM) in LS-DYNA. ABAQUS and LS-DYNA are two widely used finite element analysis (FEA) codes. The constitutive models were …
-
Interface Shear Behaviour and Modelling of Ultra-High Performance Concrete
… its high compressive strength and superior post-cracking tensile resistance and deformation capacity. One particularly common and critical application of UHPC is its use in the connections of prefabricated structural components. Therefore, understanding UHPC shear resisting performance is …
-
Towards Simulations of Pervasive Fracture Across Structural Scales
… computational solid mechanics. Propagating cracks exhibit a rich behavior governed by the delicate interplay between macroscopic elasticity and microscopic failure mechanisms in the neighborhood of the crack tip. This dissertation takes a closer look at enabling the computational modeling of …
-
Punching shear capacity of flat slab-column junctions (a study by 3-D non-linear finite element analysis)
… to describe the behaviour of concrete before cracking or crushing. After cracking, a yield criteria for 2-D model similar to Kupfer-Hilsdorf was used and concrete was assumed to be anisotropic. No softening in compression is assumed. Smeared crack approach with simple tension stiffening and …
Page 1 of 3