Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Smeared crack model"”.
-
Numerical Modelling of Scale-Dependent Damage and Failure of Composites
… toughness is accounted for in the numerical model, which enables the sublaminate-scaling effect of strength to be accurately predicted by a deterministic model. Neglecting delamination in modelling is found to cause mesh-dependence and over-estimation in strength predictions. A smeared crack …
-
Ανάπτυξη και πειραματική βαθμονόμηση καταστατικού προσομοιώματος άοπλης τοιχοποιίας υπό σεισμική καταπόνηση
… study is the development of constitutive model for the analysis of unreinforced masonry structures subjected to static in-plane and seismic loads, taking into account failure modes that occur in the in-plane direction, the calibration of the model and the examination of its applicability. …
-
Integrated mixed-mode fracture model for the design of 2D steel fibre reinforced concrete structures
… software. Initially, the existing multi-fixed smeared crack model approach in the FEMIX software is used in combination with the constitutive models currently available to conduct a set of numerical case studies of FRC elements failing in bending and shear to analyse the influence the fracture …
-
Constitutive models for the material nonlinear analysis of concrete structures including time-dependent effects
… types of structures, a multi-directional fixed smeared crack model for plane shells has been developed. This model implements an innovative approach for capturing the behavior of laminar structures failing in punching, which is based on the adoption of a softening diagram to simulate the …
-
A comparative study on the modeling of matrix cracking in fiber-reinforced polymer laminates under transverse compression - XFEM versus a smeared crack approach
… by developing precise computational material models, which saves time, material, and energy. In general, the polymer matrix is the constitute with the lowest strength against failure in a FRP; hence the matrix requires additional attention especially under transverse compression where it is …
-
Strengthening of concrete structures with near-surface mounted CFRP laminate strips
… were added: an elasto plastic multi-fixed smeared crack model to simulate concrete, interface elements and a constitutive material model for the simulation of the nonlinear behavior of the interface between CFRP and concrete.
-
Three-dimensional non-linear finite element analysis of reinforced concrete beams in torsion. Reinforced concrete members under torsion and bending are analysed up to failure. A non-linear concrete model for general states of stress including compressive strength degradation due to cracking is described.
This thesis describes a non-linear finite element model suitable for the analysis of reinforced concrete, or steel, structures under general three-dimensional states of loading. The 20 noded isoparametric brick element has been used to model the concrete and reinforcing bars are idealised as axial …
-
Experimental and Numerical Assessment of the Seismic Performance of an Innovative Retrofit Scheme for Infilled RC Frames
… frames with sliding subpanels, a finite element modeling scheme, which combines the discrete and smeared-crack approaches to capture the different failure modes of the infilled RC frames, is adopted. A previously proposed smeared-crack model is used to represent the diffused cracking and crushing …
-
Fire behavior of steel members with damaged fire protective coatings
… a numerical method is proposed, combining the smeared crack model with the discrete crack concept in a mesh splitting scheme, within the Finite Element Method, which can introduce geometric discontinuities (cracks) in the finite element mesh and create separate material sections that can …
-
Development of Novel Computational Simulation Tools to Capture the Hysteretic Response and Failure of Reinforced Concrete Structures under Seismic Loads
… because they either rely on overly simplified models or are restricted to monotonic loading. The present study is aimed to establish analytical tools for the accurate simulation of RC structures under earthquake loads. The tools are also applicable to the simulation of reinforced masonry (RM) …
-
SHEAR BEHAVIOUR OF REINFORCED AND PARTIALLY PRESTRESSED STEEL FIBRE CONCRETE BEAMS
… equations and material laws for the cracked concrete accounting for the effect of steel fibres and the softening of concrete in compression were considered. The analysis, which assumed principal stress and strain directions to coincide, involved an iterative process to evaluate the …
-
Constitutive models to simulate failure of structures made by cement based materials
… RC structures, the selected constitutive model still remains the foremost challenging task due to the complexity of concrete behaviour associated to the cracking in tension and crushing in compression. The present work proposes a new constitutive model for cement based materials, allowing …
-
Nonlinear finite element analysis of reinforced concrete exterior beam-column joints with nonseismic detailing
… identification and validation of a constitutive modeling strategy capable of simulating the behaviors known to dominate failure of beam-column joints under cyclic lateral load using NLFEA. This prototype model was formulated by combining a rotating smeared crack concrete constitutive model with a …