Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 375 for “"Smelting"”.

  1. Aluminium smelting cell control and optimisation

    The ideal aluminium smelting cell should operate at a fixed temperature and superheat. However, spatial and temporal operating strategies cause changes in temperature, which usually result in variations in superheat as well. Contrasting, in the long term, for mature cells the aluminium fluoride …

    unsw Repository record for Aluminium smelting cell control and optimisation (opens in a new tab)

  2. Corrosion of refractories in lead smelting reactors

    … on the corrosion of refractories used in lead smelting reactors (KIVCET furnace and TBRC) in literature so far. In the present work, the available literature concerning corrosion of refractories in lead-smelting reactors was reviewed. By using different analytical methods such as sessile drop …

    ubc Repository record for Corrosion of refractories in lead smelting reactors (opens in a new tab) Download PDF for Corrosion of refractories in lead smelting reactors (opens in a new tab)

  3. Activities and viscosities of lead-smelting slags

    Includes bibliographical references.

    colo-mines Repository record for Activities and viscosities of lead-smelting slags (opens in a new tab)

  4. Thermophysical properties of refractory materials in copper smelting

    In copper smelting, batchwise operating matte converters, such as Peirce-Smith converters, are usually the vessels that pose the greatest challenges in refractory wear. Understanding and reducing refractory wear is important for reasons of safety, on-line availability and smelting cost. In this …

    aalto Repository record for Thermophysical properties of refractory materials in copper smelting (opens in a new tab)

  5. Submerged combustion in-bath smelting in metallurgical reactors

    "The SCIBS (Submerged Combustion In-Bath Smelting) process has been in use worldwide for the past two decades to process materials - mainly tin, zinc, and lead concentrates. The process involves injecting fuel, either gaseous or liquid, through a lance into a molten bath of slag or concentrate. The …

    must-thes Repository record for Submerged combustion in-bath smelting in metallurgical reactors (opens in a new tab)

  6. Advanced Alumina Feeding Control of Aluminium Smelting Cell

    With the trend towards operating the Hall-Heroult process at higher amperages, there is an increasing number of difficulties in the effective control of the aluminium reduction cells, due to a greater variability in cell conditions spatially and temporally. The underlying reason is that the …

    unsw Repository record for Advanced Alumina Feeding Control of Aluminium Smelting Cell (opens in a new tab)

  7. Mechanism of Top Heat Loss from Aluminium Smelting Cells

    … one of the critical requirements in an aluminium smelting cell for removal of cell emissions, and to provide cooling to the cell components. The heat loss from the top of the cell, which is up to 55% of the total heat loss, is primarily exhausted to the scrubbing duct at around 130°C, which is of …

    auckland-ms Repository record for Mechanism of Top Heat Loss from Aluminium Smelting Cells (opens in a new tab)

  8. Paleoecotoxicology of smelting-affected lakes near Sudbury (Ontario, Canada)

    … chironomid assemblages responded to historical smelting activities, with limited biological recovery to pre-industrial conditions. Placing recovery trajectories in the context of modern environmental stressors, such as recent climatic change, will continue to be important for future mitigation …

    queens Repository record for Paleoecotoxicology of smelting-affected lakes near Sudbury (Ontario, Canada) (opens in a new tab)

  9. Combustion of waste-derived fuels in Aluminum smelting plants

    … a potential future co-combustion in an aluminum smelting plant. According to the results of this thesis, PFO seems to be the most promising waste-derived fuel to be used in a future co-combustion process.

    chalmers Repository record for Combustion of waste-derived fuels in Aluminum smelting plants (opens in a new tab)

  10. Pelletizing and sintering of ZnO bearing materials for electrothermic smelting

    Includes bibliographical references (pages 157-160).

    colo-mines Repository record for Pelletizing and sintering of ZnO bearing materials for electrothermic smelting (opens in a new tab)

  11. Agia Varvara-Almyras. An Iron Age Copper Smelting Site in Cyprus

    zurich Restricted access

  12. Transport phenomena at elevated temperatures - studies related to direct polymetallic smelting

    … used to analyse the performance of the Imperial Smelting Furnace zinc condenser and the Port Pirie Vacuum Dezincing Unit.

    birmingham Download PDF for Transport phenomena at elevated temperatures - studies related to direct polymetallic smelting (opens in a new tab)

  13. Application of theoretical and physical models to smelting and refining processes

    "The mathematical modeling of the kinetics of metal/slag/gas reactions which occur in pyrometallurgical processes is very important in providing an insight into the coupled reactions that take place between the large number of components present among the reaction phases. A generic computer code …

    must-thes Repository record for Application of theoretical and physical models to smelting and refining processes (opens in a new tab)

  14. The use of hydrogen as a reductant in the smelting industry

    Both the smelting of chromite and manganese (Mn) ores consume a significant amount of carbon (C) and electrical energy. The smelting processes contribute to the elevation of carbon dioxide (CO2) emissions in the atmosphere as stable metal oxides are reduced to their metallic states via the removal …

    nwu-za Repository record for The use of hydrogen as a reductant in the smelting industry (opens in a new tab)

Page 1 of 19