Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"SnAgCu"”.

  1. Multiscale Modeling of the Anisotropic Creep Response of SnAgCu Single Crystal

    The lack of statistical homogeneity in functional SnAgCu (SAC) solder joints due to their coarse grained microstructure, in conjunction with the severe anisotropy exhibited by single crystal Sn, renders each joint unique in terms of mechanical behavior. An anisotropic multiscale modeling framework …

    maryland Repository record for Multiscale Modeling of the Anisotropic Creep Response of SnAgCu Single Crystal (opens in a new tab)

  2. EFFECT OF SURFACE FINISHES AND INTERMETALLICS ON THE RELIABILITY OF SnAgCu INTERCONNECTS

    Power semiconductor devices are used in a wide range of applications. In these applications, power semiconductor devices are required to handle large currents and as a result they tend to dissipate large amounts of heat. In addition, the device and their attendant packages must be capable of …

    maryland Repository record for EFFECT OF SURFACE FINISHES AND INTERMETALLICS ON THE RELIABILITY OF SnAgCu INTERCONNECTS (opens in a new tab)

  3. Transient and Steady-state Creep in a SnAgCu Lead-free Solder Alloy: Experiments and Modeling

    It has been conventional to simplify the thermo-mechanical modeling of solder joints by omitting the primary (transient) contributions to total creep deformation, assuming that secondary (steady-state) creep strain is dominant and primary creep is negligible. The error associated with this …

    toronto-retro Repository record for Transient and Steady-state Creep in a SnAgCu Lead-free Solder Alloy: Experiments and Modeling (opens in a new tab)

  4. Anisotropic Multi-scale Modeling for Steady-state Creep Behavior of Oligocrystalline SnAgCu (SAC) Solder Joints

    … of as-solidified oligocrystalline SAC (SnAgCu) solder joints is explicitly modeled in terms of multiple length scales (four tiers of length scales are used in the description here). At the highest length-scale in the joint (Tier 3), there are few highly anisotropic viscoplastic grains in …

    maryland Repository record for Anisotropic Multi-scale Modeling for Steady-state Creep Behavior of Oligocrystalline SnAgCu (SAC) Solder Joints (opens in a new tab)

  5. Effect of Au Content on Microstructural Evolution of SnAgCu Solder Joints That Undergo Isothermal Aging and Reliability Testing

    … gold content on the microstructural evolution of SnAgCu solder joints. Three integrated circuit packages with various thicknesses of gold coatings were assembled on boards that were made with thin (flash) or thick gold over nickel coatings. The boards were divided into three groups based on the …

    calpoly Repository record for Effect of Au Content on Microstructural Evolution of SnAgCu Solder Joints That Undergo Isothermal Aging and Reliability Testing (opens in a new tab)

  6. Synthesis of tin, silver and their alloy nanoparticles for lead-free interconnect applications

    … created by dispersing the SnAg or SnAgCu alloy nanoparticles into an acidic type flux spread and wet on the cleaned copper surface at 220 to 230 ¡æ. This study demonstrated the feasibility of nano sized SnAg or SnAgCu alloy particle pastes for low processing temperature lead-free …

    gatech Repository record for Synthesis of tin, silver and their alloy nanoparticles for lead-free interconnect applications (opens in a new tab)

  7. Combined thermal, thermodynamic and kinetic modelling for the reliability of high-density lead-free solder interconnections

    … intermetallic compounds between near-eutectic SnAgCu solder alloys and Ni-substrate was evaluated as a function of temperature. Secondly, it was analyzed how the Ni dissolved in Cu6Sn5 compound affects the driving forces for the diffusion fluxes and hence the growth kinetics of (Cu,Ni)6Sn5 and …

    aalto Repository record for Combined thermal, thermodynamic and kinetic modelling for the reliability of high-density lead-free solder interconnections (opens in a new tab)

  8. Thermomechanical cycling investigation of CU particulate and NITI reinforced lead-free solder

    … (SFC). A baseline is established with a SnAgCu solder that is then compared to test runs on the same solder matrix with Copper particles and then the SMA, Nickel- Titanium wire as reinforcements.

    nps Repository record for Thermomechanical cycling investigation of CU particulate and NITI reinforced lead-free solder (opens in a new tab)

  9. Thermo-mechanical response of monolithic and NiTi shape memory alloy fiber reinforced Sn-3.8Ag-0.7Cu solder

    … a novel adaptive Tin-Silver-Copper (SnAgCu) solder reinforced with NiTi shape-memory alloy (particles or fiber) developed. An experimental apparatus has been designed to investigate the thermo-mechanical straincontrolled fatigue life of the solder during both single and multiple …

    nps Repository record for Thermo-mechanical response of monolithic and NiTi shape memory alloy fiber reinforced Sn-3.8Ag-0.7Cu solder (opens in a new tab)

  10. Deep material networks for lead-free solder alloys

    … applied to a microstructural model for SAC-305, SnAgCu with 3 weight percent silver and 0.5 weight percent copper, generated by a phase field simulation for spinodal decomposition. The DMN method homog enizes a heterogeneous microstructure for multiscale simulation purposes. Five microstruc tures …

    chalmers Repository record for Deep material networks for lead-free solder alloys (opens in a new tab)

  11. Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions

    … electronic control devices, Tin-Silver-Copper (SnAgCu) alloy solder joints used to assemble the component of the devices are functioning at homologous temperature above 0.8. In such ambient temperatures, solder alloys have limited mechanical strength and will be sensitive to strain rate. The …

    greenwich Download PDF for Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions (opens in a new tab)

  12. Improved Parameters of ANAND Model and Advanced FEA Technique for Low-Cycle Fatigue Life: Finite Element Analysis Models for Pb-free Solder and Pb Solder in Real Life Ball Gird Ally Package

    … industry has concluded that various versions of SnAgCu solder alloy offer the best alternative for eutectic SnPb solder. With the current trend of cheaper, faster, and better electronic equipment, evaluating the package and system performance very early in the design cycle using simulation tools …

    portland-state Repository record for Improved Parameters of ANAND Model and Advanced FEA Technique for Low-Cycle Fatigue Life: Finite Element Analysis Models for Pb-free Solder and Pb Solder in Real Life Ball Gird Ally Package (opens in a new tab)

  13. Effects of Lanthanum Doping on the Microstructure and Mechanical Behavior of a SnAg Alloy

    Lead-free solders such as SnAg and SnAgCu are used extensively as replacements of SnPb solders in microelectronics packaging. But these alloys have several drawbacks, such as poor wetting ability and formation of intermetallic compounds (IMC). Doping of rare earth element (RE) on SnAg alloys has …

    gatech Repository record for Effects of Lanthanum Doping on the Microstructure and Mechanical Behavior of a SnAg Alloy (opens in a new tab)

  14. PERFORMANCE ASSESSMENT OF MEMS GYROSCOPE AND SHOCK DURABILITY EVALUATION OF SAC305-X SOLDERS FOR HIGH TEMPERATURE APPLICATIONS

    … of the ways to improve drop/shock reliability of SnAgCu solder is by microalloy addition of various dopants such as Mn, Ce, Ti, Y, Ge, Bi, Zn, In, Ni, Co etc. Thus, the second part of this dissertation aims to evaluate the shock durability of SAC305 and SAC305-X (where X refers to two different …

    maryland Repository record for PERFORMANCE ASSESSMENT OF MEMS GYROSCOPE AND SHOCK DURABILITY EVALUATION OF SAC305-X SOLDERS FOR HIGH TEMPERATURE APPLICATIONS (opens in a new tab)

  15. Real-Time Interfacial FTIR-Electrochemical Investigation of Smart Passivating Film for Extended Lifetime of Copper Containing Microelectronic Devices

    … and on the electrode. Additionally, during the SnAgCu (SAC) solder ball bonding on the Cu wafer by mass reflow process, solder flux is used to reduce the native oxides on Cu and SAC solder ball. Post cleaning, residual amount of the solder flux corrodes the Cu wafer. Passivation coating is used …

    unt Repository record for Real-Time Interfacial FTIR-Electrochemical Investigation of Smart Passivating Film for Extended Lifetime of Copper Containing Microelectronic Devices (opens in a new tab)

  16. Gefüge- und Phasenausbildung in kleinvolumigen Vielstoff-Systemen unter verschiedenen Abkühlgeschwindigkeiten

    … - Cu/Ni/Au-Metallisierung des Leiterplattenpads /SnAgCu-Lot mit unterschiedlichen eutektischen und naheutektischen Zusammensetzungen bilden sich CuNiAu-haltige intermetallische Phasen an der Grenze Leiterplattenpad/Lot. Diese und die Auswirkungen im Gefüge werden in dieser Arbeit erstmals …

    fu-berlin Repository record for Gefüge- und Phasenausbildung in kleinvolumigen Vielstoff-Systemen unter verschiedenen Abkühlgeschwindigkeiten (opens in a new tab)

  17. FE IMPACTS ON SOLDER JOINT PROPERTIES IN MICROELECTRONIC ASSEMBLY

    LEAD-FREE SN BASED SOLDER MATERIALS HAVE BEEN USED FOR ELECTRONIC PACKAGING FOR MANY YEARS. THE CONVENTIONAL METHOD FORMING SOLDER/SUBSTRATE BOND IS OVEN REFLOW, WHICH THE WHOLE DEVICE WILL GO THROUGH HEATING PROCESS IN OVEN. HOWEVER, THE HIGH TEMPERATURE MELTING PROFILE FOR LEAD-FREE SOLDER MAY …

    nus Repository record for FE IMPACTS ON SOLDER JOINT PROPERTIES IN MICROELECTRONIC ASSEMBLY (opens in a new tab) Download file for FE IMPACTS ON SOLDER JOINT PROPERTIES IN MICROELECTRONIC ASSEMBLY (opens in a new tab)