Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 73 for “"Snubber"”.
-
Design of a Resonant Snubber Inverter for Photovoltaic Inverter Systems
… limited to higher power levels. The resonant snubber inverter is a soft switching topology that eliminates many of these problems by taking advantage of the bipolar switching action of the power stage switches. This allows for a significant size reduction in the additional parts and …
-
A Novel Auxiliary Resonant Snubber Inverter Using Wide Bandgap Devices
… to be implemented. A novel auxiliary resonant snubber is introduced. The design and operation are carried out, in which this snubber circuitry enables main Gallium Nitride (GaN) switches operating under zero voltage switching (ZVS) condition, and auxiliary Silicon Carbide (SiC) diodes switching …
-
RC Snubber Design using Root-Loci Approach for Synchronous Buck SMPS
… method for designing optimum passive series RC snubbers for continuous-current synchronous buck switch mode power supply (SMPS). Synchronous buck SMPS is the most popular power converter topology found in modern consumer electronics. It offers relatively good efficiency to target the …
-
High Power Inverter EMI Characterization and Improvement by Auxiliary Resonant Snubber Inverter
… The noise reduction in an auxiliary resonant snubber inverter (RSI) is presented. The observation of voltage ringing and current ringing and the methods to suppress these ringing in the implementation of RSI are also discussed. The test condition and circuit layout are described as the basis …
-
DEVELOPMENT OF A SNUBBER TYPE MAGNETORHEOLOGICAL FLUID ELASTOMERIC LAG DAMPER FOR HELICOPTER STABILITY AUGMENTATION
Most advanced helicopter rotors are typically fitted with lag dampers, such as elastomeric or hybrid fluid-elastomeric (FE) lag dampers, which have lower parts counts, are lighter in weight, easier to maintain, and more reliable than conventional hydraulic dampers. However, the damping and …
-
Numerical modelling of multilayer semiconductor devices: an investigation into reverse recovery voltage snap-off in snubber diodes
The classic paper by Somos has shown how abrupt recovery occurred in alloyed semiconductor diodes, but had postulated that the commutation of diffused diodes may differ dramatically. This was confirmed by other workers. Diffused soft recovery diodes are now in general use. My investigations have …
-
Four phase switch-mode inverter
… done during the project shows that an RC-snubber would be able to lower the EMI by lowering the dv/dt during switching, while introducing extra losses in the snubber circuit without lowering the losses in the IGBTs, only moving them from turn-off to turn-on. In the finished hardware, the …
-
Improving the Efficiency of SiC-based In- verter in BEV by Selecting the Switching Slew Rate for Optimisation of Switching Losses and Voltage Overshoot
… the gate drive signal VGG, and incorporating a snubber circuit. The methodologies were evaluated using a Double Pulse Test (DPT) setup in LTspice and a drive system model in PLECS. According to the DPT results, it was found that applying a multi-step pulse at VGG with appropriate magnitude and …
-
Soft-Switching, Interleaved Inverter for High Density Applications
… A novel interleaved auxiliary resonant snubber for high-frequency soft-switching is introduced. The design of an auxiliary resonant snubber is discussed; this allows the main GaN MOSFETs to achieve zero voltage switching (ZVS). The auxiliary switches and SiC diodes achieve zero current …
-
Parametric average value modeling of flyback converters in ccm and dcm including parasitics and snubbers
… of discontinuous state during the DCM. The snubber circuits in flyback converter have also been investigated. Appearance of snubbers in the model introduces a problem on the output voltage besides improving the efficiency prediction. It is shown that with the snubbers the conventional …
-
Small Signal Analysis and Control of Snubberless Naturally-Clamped Soft Switching Current-Fed PWM DC/DC Converters
… of current-fed converters is the requirement of snubber circuit to clamp the turn-off voltage spike across the semiconductor devices. Passive snubbers leads to low efficiency as the energy absorbed by the clamping capacitor is dissipated in the resistor. Active-clamping results in better …
-
Improvements in integrated high-quality rectifier-regulators
… control, swinging choke, and low loss LC snubber techniques are proposed to alleviate these problems. Finally, several experimental converters with different specifications are evaluated with respect to efficiency and ability to meet the IEC555-2 standards.
-
Solid state capacitor discharge pulsed power supply for railguns
… in series acting as a single switch. Railgun, snubber circuit and gate control systems were modeled for a 50 kJ railgun supply. These simulations yielded component values necessary to protect and control the thyristors for voltages up to 10 kV, currents up to 180 kA, and changes in current with …
-
Pulsed Power Circuit Topologies for Gas Laser Applications
… lifetime. A novel integrated capacitor and snubber assembly that leads to a reduction in electrode erosion is proposed, designed and experimentally verified. The assembly’s coaxial design is shown to improve the energy dissipation by the snubber. Thus, the total amount of charge flowing …
-
Innovative GTO Thyristor Based Switches Through Unity Gain Turn-Off
… ETO based power system simpler in terms of dv/dt snubber, di/dt snubber and over current protection, resulting in significant savings at the system level. Experimental and numerical simulation results that demonstrate the advantages of the ETO are presented. A new family of snubberless turn-off …
-
A Wide-Range Input Auxiliary Power Supply Based on Series-connected SiC MOSFETs for Modular Multi-level Converter
… Additionally, pulse transformer and passive snubber schemes are explored to achieve consistent gate signals which avoid the voltage balancing issues in series-connected MOSFETs at the switching transients. In-depth analysis of the proposed topology is presented, along with SPICE simulation …
-
Topology and Control Investigation for Low-voltage High-current Isolated DC-DC Converters
… a half-bridge DC-DC converter. An active-clamp snubber topology is presented in the half-bridge DC-DC converters to recycle the leakage inductance energy and attenuate the ringing. Since dissipative snubbers are removed, a converter can operate more efficiently. Body-diode …
-
Optimization And Design Of Photovoltaic Micro-inverter
… spike caused by the leakage inductor, a novel snubber cell combining soft switching technique with snubber technique together was proposed. Simulation and experimental waveforms illustrated the same as characteristics as the theoretical analysis. In summary, the dissertation analyzed each power …
Page 1 of 4