Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Soil Resistivity"”.

  1. Συμβολή στη μελέτη του ιονισμού του εδάφους

    … of any grounding system greatly depends on the soil resistivity. Soil resistivity varies not only seasonally, but also due to the development of non-linear phenomena (such as soil ionization) when a high impulse current is injected to the grounding system. The present PhD thesis focuses on the …

    greece Repository record for Συμβολή στη μελέτη του ιονισμού του εδάφους (opens in a new tab)

  2. A Novel Approach to Touch Voltage Risk Assessment for Gas Pipelines in Shared Transmission Corridors

    … method that integrates a year-long dataset of soil resistivity measurements. By developing soil resistivity models and generating touch voltage hazard profiles over time, a probability reduction factor is introduced to enhance risk assessment accuracy. This factor provides pipeline operators …

    auckland-tech Repository record for A Novel Approach to Touch Voltage Risk Assessment for Gas Pipelines in Shared Transmission Corridors (opens in a new tab)

  3. Συμβολή στη μελέτη της συμπεριφοράς συστημάτων γείωσης με προσθήκη βελτιωτικών υλικών

    … by some fundamental parameters: the rate of soil resistivity, the type and the size of grounding systems. The continuous improvement in designing these systems, together with the development of models that will help predict — in time — their precise behavior (both transient and steady state), …

    greece Repository record for Συμβολή στη μελέτη της συμπεριφοράς συστημάτων γείωσης με προσθήκη βελτιωτικών υλικών (opens in a new tab)

  4. The effects of moisture, cation concentration, temperature, density and composition of soils on their electrical resistivity

    … temper~ t ure and grai n si ze on the electrical resistivity of so il s are examined using laboratory prepared soils. An i nexpen si ve method for preparing soils of different compositions was developed by mixing various size fractions i n the laboratory. Moisture and cation c oncentration are …

    brock Repository record for The effects of moisture, cation concentration, temperature, density and composition of soils on their electrical resistivity (opens in a new tab)

  5. Permeability, Resistivity and Strength of Fouled Railroad Ballast

    … the level of fouling in a ballast layer by soil resistivity and permeability tests to be followed by a second study. A test box was designed and fabricated at the lab at the University of Kansas to perform the constant head permeability test and soil resistivity tests. Constant head tests …

    ku Repository record for Permeability, Resistivity and Strength of Fouled Railroad Ballast (opens in a new tab)

  6. Implications of environmental conditions on arid gypseous soils for geotechnical engineering applications

    Loosely packed sandy soil, created via aeolian deposition and stabilised by interparticle bonding via gypsum crystals (dispersed within the soil fabric), are a significant geohazard in hot, arid environments such as the Middle East (for example, these deposits cover a large area of Iraq). Gypsum, …

    birmingham Download PDF for Implications of environmental conditions on arid gypseous soils for geotechnical engineering applications (opens in a new tab)

  7. Assessment of induced potentials on pipelines from high voltage power lines

    … respect to three criteria: pipeline sections, soil nature /contents (soil resistivity) and location profiles of the pipeline. The possible locations of the pipeline: under/ above ground and two possible power systems operation situations: steady state and transient fault situations have been …

    auckland-ms Repository record for Assessment of induced potentials on pipelines from high voltage power lines (opens in a new tab)

  8. A geophysical survey of the Kituhwa Mound (31Sw2) and the surrounding area (31Sw1), Swain County, North Carolina

    … possibly due to more intense burning. A soil resistivity anomaly in the location of the townhouse ramp could have been made by large boulders such as those used at Coweeta Creek and the ground-penetrating radar anomaly could have been made by clay packed on the sides of the mound, also …

    ut-knoxville Repository record for A geophysical survey of the Kituhwa Mound (31Sw2) and the surrounding area (31Sw1), Swain County, North Carolina (opens in a new tab)

  9. Effects of Mica On Soil Properties For Embankment Construction

    … part of the highway construction process, and soils from borrow pits are often used to construct these structures. The soil from these borrow pits is often characterized as needed, on a project by project basis, and is tested for the properties necessary for embankment design. As the upstate of …

    south-carolina Repository record for Effects of Mica On Soil Properties For Embankment Construction (opens in a new tab)

  10. Geophysical Assessment of Subsurface Soil Conditions Using Capacitively Coupled Resistivity

    … the applicability of Capacitively-Coupled Resistivity (CCR) as an improvement on traditional drilling and sampling methods for subsurface soil investigations. The CCR method could be used to identify critical locations for drilling and sampling such as expansive clay layers and anomalies …

    arkansas Repository record for Geophysical Assessment of Subsurface Soil Conditions Using Capacitively Coupled Resistivity (opens in a new tab)

  11. PAHs and nickel contaminated soil containment and stabilization with silica grout

    The migration of contaminants from a site in the soil represents a real threat to the environment and to human health because contaminants might leach to groundwater and humans could be affected directly and indirectly. Therefore, the objective of this research was to evaluate the vulnerability of …

    concordia Download PDF for PAHs and nickel contaminated soil containment and stabilization with silica grout (opens in a new tab)

  12. An investigation of underground corrosion through the use of hyperspectral remote sensing

    … have included the following factors: climate, soil pH, soil moisture content, soil resistivity, overlying plant spectral reflectance, and heavy metal content in soil and vegetation. The principal method of protection against steel tower corrosion is zinc galvanization. As zinc serves as a …

    uvic Repository record for An investigation of underground corrosion through the use of hyperspectral remote sensing (opens in a new tab)

  13. Earth electrode resistance diagnosis and measurements

    … assessing the impact of temperature changes on soil resistivity.The methodology encompasses installing both copper and AX-PRO electrodes at the test sites, performing empirical measurements, conducting simulations using advanced software, and calculating expected resistance values based on …

    reykjavik Repository record for Earth electrode resistance diagnosis and measurements (opens in a new tab)

  14. Engineering applications of soil information system (sis): precision irrigation and drainage systems design

    … to apply irrigation water to maintain uniform soil water content across the field. An optimization-simulation model was developed for this purpose using a dynamic programming approach. The simulations run by the optimization model showed that the existing pivot speed prescription resulted in a …

    tamu Repository record for Engineering applications of soil information system (sis): precision irrigation and drainage systems design (opens in a new tab)

  15. Ecohydrological Analysis in a Forest Ecosystem of Seasonal Variations in the Moisture Content of Clay-rich Soil

    Soil water availability influences the physiological, structural, and functional properties of plants. The physical properties of the soil play an important role in determining water availability, and shapes both the root distribution and tree adaptability to changes in weather and climate. …

    tamu Repository record for Ecohydrological Analysis in a Forest Ecosystem of Seasonal Variations in the Moisture Content of Clay-rich Soil (opens in a new tab)

  16. Use of Statistical Methods to Study Corrosion Aggressiveness at Nevada Mechanically Stabilized Earth Wall Sites

    … regarding the corrosion losses of the soil reinforcements, which included both bare steel and galvanized steel, and electrochemical properties of the MSE backfill in order to identify its aggressiveness. One of the three walls at the Flamingo intersection was replaced with a …

    unr Repository record for Use of Statistical Methods to Study Corrosion Aggressiveness at Nevada Mechanically Stabilized Earth Wall Sites (opens in a new tab)

  17. Improved Lightning Performance for 132 kV OHL

    … shield wires for the 132 kV grid due to the high soil resistivity in Sweden. Today the situation is different with sensitive industrial loads and the current Vattenfall standard is to build portal tower with one shield wire. The shield wire is however not used to reduce the amount of lightning …

    chalmers Repository record for Improved Lightning Performance for 132 kV OHL (opens in a new tab)

  18. Μεταβατική συμπεριφορά συστημάτων γείωσης

    … (layout of the grounding system, quality of the soil, waveform and peak value of the injected current) on the transient behaviour of grounding systems. The first chapter of the Ph.D. thesis includes the review of the up-to-date scientific research bibliography, associated with the transient …

    greece Repository record for Μεταβατική συμπεριφορά συστημάτων γείωσης (opens in a new tab)

  19. Risk-Based Maintenance Planning Model for Oil and Gas Pipelines

    … that cathodic protection effectiveness and soil resistivity are the leading causes of external corrosion failures, while the depth of cover is an important factor of mechanical damages. The COF model attests that diameter, as well as the location properties are important factors for …

    concordia Download PDF for Risk-Based Maintenance Planning Model for Oil and Gas Pipelines (opens in a new tab)

Page 1 of 2