Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Sol-Gel Processes"”.
-
Sol-gel processes for protection and synthesis of luminescent materials
Sol-gel chemistry has a very broad application area such as thin films and coatings, monoliths, powders, grains and spheres, fibers, composites, porous gels and membranes. From thin film to powder, different kind of materials with excellent control of stoichiometry, density and microstructure can …
-
STUDIES ON MORPHOLOGY CONTROL OF POROUS SILICA THROUGH POLYMEER-INCORPORATED SOL-GEL PROCESSES
本文データは平成22年度国立国会図書館の学位論文(博士)のデジタル化実施により作成された画像ファイルを基にpdf変換したものである
-
Reforming of toluene formed during the gasification of biomass with alumina based catalysts prepared by aqueous sol-gel processes
… applications. During this project, an aqueous sol-gel method for the synthesis of y-Al2O3 supports is developed. In the aim of developing catalysts with metallic nanoparticles finely dispersed, supports of y-Al2O3 are modified with a functionalized silicon precursor …
-
Modified TiO2-based Photocatalytic Films and Powders produced by Aqueous and Non-Aqueous Sol-Gel Processes for Water Purification
… which includes (i) the development of a sol-gel chemistry suitable for the production of stable colloidal suspensions of TiO2 particles, (ii) the optimization of the deposition method and (iii) the development of an experimental device to measure the photocatalytic activity of the films. …
-
CONTROL OF STRUCTURE AND FUNCTIONAL PROPERTIES OF GA:M5+-CODOPED LITHIUM LANTHANUM ZIRCONATE (LI7LA3ZR2O12) (M=Ta, Nb) SOLID ELECTROLYTES BY AN OPTIMIZED PROCESSING PROFILE
… SYSTEMATICALLY INVESTIGATED USING CONVENTIONAL SOLID-STATE REACTIONS OR LOW-TEMPERATURE SOL-GEL PROCESSES. EFFECTS OF DOPANTS ON STABILISATION OF THE FAST-ION CONDUCTING CUBIC PHASE, STRUCTURAL DETAILS, LI+-ION ORDERING AND CONDUCTIVITY AND THEIR CORRELATION WERE STUDIED SYSTEMATICALLY BY X-RAY …
-
Development of novel iron (III) doped titanium dioxide photocatalysts and application to organic dyes degradation in aqueous systems
… these problems through the development of novel solar-light active photocatalytic systems. Based on the literature review, research was focused on the modification of TiO2 photocatalysts through doping with iron(III), which has unique electronic structure and ionic radii (0.64 Å) similar to that …
-
Automation and Autonomous Experimentation for Sol-Gel Nanomaterial Synthesis
… timelines compared to traditional manual processes by efficiently targeting experimental efforts. Sol-gel processes are used to synthesize a diverse array of metal oxide nanomaterials for many applications. In particular, mesoporous colloidal silicas are promising materials for use as …
-
Multifunctionality of SrTiO3 nanocubes
… particles. Methods ranging from hydrothermal/solvothermal reactions, sol-gel processes to molten-salt synthesis and combustion. Although these methods have been proved successful in the synthesis of nanocubes, the adequate control of the particle size and morphology remains one of the major …
-
Flow-Induced Self Assembly in Micellar Fluids with Applications to Nanomanufacturing
Structure and rheology of surfactant solutions are very sensitive to electrostatic interactions and flow deformation. The objectives of this experimental study have been to uncover the essential physics of structure transitions in surfactant solutions under simple shear as well as porous medium …
-
Ionic Liquid-Assisted Morphology Control and Multi-Metal Doping of Zn-Based Materials
… such as hydrothermal, co-precipitation, and sol-gel processes, face challenges like high energy consumption and complex operations. Thus, greener, more economical approaches hold great promise. This study uses the Oxidative Ionothermal Synthesis (OIS) method, employing ionic liquids as …
-
HYBRID PARTICLES AND MEMBRANES BASED ON POLYSILSESQUIOXANE BUILDING BLOCKS WITH FLUORESCENT DYES
Sol-gel processing has been demonstrated to produce supported inorganic and hybrid microporous membranes with controlled physical and chemical properties under mild conditions. In preparing asymmetric membranes on mesoporous ceramic supports using traditional sol-gel processes, however, …
-
Ring-opening and acyclic diene metathesis: Polymerisation, thiol click modification and organic-inorganic composite preparation
… prepared via in-situ and simultaneous ROMP and sol-gel processes. Although the hydrophobicity of conventional polynorbornene caused phase separation, well dispersed titania nano-composites were achieved using functional exo-7-oxanorbornene thiol-Michael adducts. The combination of thiol-based …
-
Effect of Indium-Tin Oxide Surface Modifications on Hole Injection and Organic Light Emitting Diode Performance
… evaporation, self-assembled-monolayer, and sol-gel processes were applied on to ITO surfaces as well. The SiO2 buffered ITO surfaces were characterized by AFM and CV techniques. OLED devices based on the ITO electrodes modified by the different processes were fabricated and characterized in …
-
Integrated development of treatment and management technologies of asbestos containing materials
… investigated. Oxalic acid is able to achieve dissolution of chrysotile fibers. AC was added to oxalic acid solutions of different concentrations in order to investigate the ability of asbestos fibers to react with oxalic acid in the presence of cement. Then, the use of tetraethyl orthosilicate …
-
Inorganic-Organic Sol-Gel Derived Hybrid Materials as Abrasion Resistant Coatings
… hybrid materials have been developed using sol-gel reactions of a trialkoxysilylated organic compound and a metal or semi-metal alkoxide and applied as coatings on polymeric or metallic substrates. Many of these coatings have demonstrated good to excellent abrasion resistance. Abrasion …
Page 1 of 2