Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Solar collectors -- Testing"”.

  1. Stagnation temperature test methods for determining solar collector thermal performance degradation

    … degradation of materials used in flat-plate solar collectors. The proposed method is based on measuring stagnation (no-flow) temperatures of the absorber plate. A comparison of the advantages and limitations of the proposed method is made with the conventionally used existing method which is …

    vt Repository record for Stagnation temperature test methods for determining solar collector thermal performance degradation (opens in a new tab)

  2. Analysis of flat-plate solar collector durability test data

    … types of commercially available flat plate solar collectors. The test results for five types of collectors are analyzed. The purpose of the test program was to investigate the feasibility of determining the durability of materials by measuring collector thermal efficiency at specified …

    vt Repository record for Analysis of flat-plate solar collector durability test data (opens in a new tab)

  3. Investigation of performance degradation and test methods for flat-plate solar collectors

    … examination of the implementation of the testing procedure is made to identify interlaboratory differences.

    vt Repository record for Investigation of performance degradation and test methods for flat-plate solar collectors (opens in a new tab)

  4. Investigation of standard test procedures for integral storage solar domestic hot water systems

    … performance of two commercial integral storage collectors for solar domestic hot water systems. These tests were performed under a variety of ambient conditions and irradiance levels, both with and without forced circulation and noontime hot water draws. An analytical model was developed to …

    vt Repository record for Investigation of standard test procedures for integral storage solar domestic hot water systems (opens in a new tab)

  5. Comparison of measured to predicted performance of owner-built solar integral collector storage water heater systems

    … by five integral collector storage (ICS) passive solar water heater systems installed at various geographic locations in Virginia to predicted values calculated using Annual Performance Methodology (APM). APM is a prediction method developed by Alan Zollner that offers quick and easy comparisons …

    vt Repository record for Comparison of measured to predicted performance of owner-built solar integral collector storage water heater systems (opens in a new tab)

  6. Design of a solar thermal collector simulator.

    … has created a need for research in the area of solar technology. This has brought about many new opportunities for universities and research centers to build upon existing technology or develop new strategies for handling how energy systems function. Both avenues of research could require an …

    baylor Repository record for Design of a solar thermal collector simulator. (opens in a new tab)

  7. Design and validation of a solar domestic hot water heating simulator.

    … from increased research in and improvement of solar technology. This thesis outlines the implementation of a solar domestic water heating simulator and the validation of a double and single tank domestic hot water configuration. The results and procedures were compared to the guidelines of the …

    baylor Repository record for Design and validation of a solar domestic hot water heating simulator. (opens in a new tab)

  8. A Calorimeter for Solar Collector Testing Facilities

    … (RHS) is an electrical calorimeter used with solar collector test facilities. It can be used to calibrate the test facility or to measure the thermal performance of a collector. The RHS described here was designed to be accurate enough to be used as a standard for verification of test facility …

    ucf Repository record for A Calorimeter for Solar Collector Testing Facilities (opens in a new tab)

  9. A Cavity Absorber for a Focusing Solar Collector

    … efficiency. The processes of building and testing the absorber are detailed, and test results are reported. Observed performance is significantly below that predicted. Mirror alignment errors are considered the most likely reason for the discrepancy. Other possible improvements to the …

    ucf Repository record for A Cavity Absorber for a Focusing Solar Collector (opens in a new tab)

  10. Design and Thermal Performance Testing of a Heat Pipe Flat Plate Solar Collector

    … of heat pipes for removing heat from flat plate solar collectors and transferring the energy to air in a space heating system. Heat pipes are passive devices which are very efficient at transporting heat energy. They operate using a closed evaporation-condensation cycle. This thesis presents the …

    ucf Repository record for Design and Thermal Performance Testing of a Heat Pipe Flat Plate Solar Collector (opens in a new tab)

  11. Analytical and Experimental Investigation of Pumped Solar Hot Water Systems

    … transient computer model of a forced circulation solar hot water system has been developed. The model allows for capacitance effects by solving the energy balances on a four node model of the solar collector. The tank model is designed to include the presence of an auxiliary heater and to allow …

    ucf Repository record for Analytical and Experimental Investigation of Pumped Solar Hot Water Systems (opens in a new tab)

  12. Computer Aided Analysis of Flat Plate Solar Collectors

    A computer model of a flat plate solar collector has been devised. The model is able to simulate most common types of collectors, with up to three transparent covers of any material. Using primarily equations available from the literature the model calculates the transmission through the cover …

    ucf Repository record for Computer Aided Analysis of Flat Plate Solar Collectors (opens in a new tab)

  13. On-Site Excreta Treatment and Disposal in West Africa

    In operation, liquid from the test facility is circulated through the RHS core. The liquid is heated by passing over the resistance heaters. If the test facility's calibrations are under investigation, the RHS input power and temperatures are compared with those recorded by the test facility. If a …

    ucf Repository record for On-Site Excreta Treatment and Disposal in West Africa (opens in a new tab)

  14. Test Methods for Evaluating Performance of Solar Units

    This report is concerned with the performance of solar hot water units for laboratory and field use. A solar unit is defined as a system consisting of a collector, storage tank, piping system and controls. Older unites typically employ the thermosyphon principle (gravity) while more recent models …

    ucf Repository record for Test Methods for Evaluating Performance of Solar Units (opens in a new tab)