Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Solder Bump"”.

  1. Quality assessments of solder bump interconnections in ball grid array packages using laser ultrasonics and laser interferometer

    … and thermal performance. However, these solder bump interconnections in SMDs are sandwiched between the silicon die and the substrate, which makes them challenging to be inspected. Current non-destructive solder bump inspection techniques like electrical testing, X-ray and acoustic …

    gatech Repository record for Quality assessments of solder bump interconnections in ball grid array packages using laser ultrasonics and laser interferometer (opens in a new tab)

  2. Development of convective reflow-projection moire warpage measurement system and prediction of solder bump reliability on board assemblies affected by warpage

    … PWB warpage on the fatigue reliability of solder bumps on board assemblies was investigated using finite element modeling (FEM) and the projection moire system. The 3-D models of PWBAs with varying board warpage were used to estimate the solder bump fatigue life for different chip packages …

    gatech Repository record for Development of convective reflow-projection moire warpage measurement system and prediction of solder bump reliability on board assemblies affected by warpage (opens in a new tab)

  3. Investigation of electromigration reliability of solder joint in flip-chip packages

    Electromigration related damage in solder bumps is one of the emerging issues resulting from the fast scaling-down of features in semiconductor packages. Although the electromigration phenomenon has been intensively studied on silicon level interconnect lines since the late 1960s, it is far less …

    texas Repository record for Investigation of electromigration reliability of solder joint in flip-chip packages (opens in a new tab)

  4. Examination of solder bump reflow process and copper metallisation process induced stress distribution in silicon substrates using synchrotron x-ray topography, micro-raman spectroscopy and finite element modelling

    … microprocessors due to the lead-tin solder bump process for BGA packaging, and to evaluate and compare stress distributions in Si wafers due to the electroless Cu interconnect process with varying geometrical line width in IC processing and compare with the sputtered Cu interconnect …

    dcu Download PDF for Examination of solder bump reflow process and copper metallisation process induced stress distribution in silicon substrates using synchrotron x-ray topography, micro-raman spectroscopy and finite element modelling (opens in a new tab)

  5. Numerical Study For Acoustic Micro-Imaging Of Three Dimensional Microelectronic Packages

    … the modelling of a flip chip with a 140µm solder bump assembly, which is implemented with a 230MHz virtual raster scanning transducer with a spot size of 17µm. The Virtual Transducer was designed to reduce the total numerical elements from hundreds of millions to hundreds of thousands. …

    liverpool-jm Repository record for Numerical Study For Acoustic Micro-Imaging Of Three Dimensional Microelectronic Packages (opens in a new tab) Download PDF for Numerical Study For Acoustic Micro-Imaging Of Three Dimensional Microelectronic Packages (opens in a new tab)

  6. Precision Self -Alignment Techniques for Optoelectronic Integration

    … accuracies have been achieved using solder bump arrays for component alignment and etched V-grooves for optical fiber alignment. The self-alignment potential of eutectic tin-silver solder bump arrays to produce sub-quarter-micron alignment precision is demonstrated. The potential for …

    uiuc Repository record for Precision Self -Alignment Techniques for Optoelectronic Integration (opens in a new tab)

  7. DEVELOPMENT AND APPLICATION OF COMPUTER-AIDED FRINGE ANALYSIS

    … interferometer for co-planarity of high-density solder bump patterns; the infrared light enables the regularly spaced solder bump arrays to produce well-defined diffracted wavefronts, (2) development of an inverse method to determine elastic constants using circular disc and moiré interferometry; …

    maryland Repository record for DEVELOPMENT AND APPLICATION OF COMPUTER-AIDED FRINGE ANALYSIS (opens in a new tab)

  8. Response of multi-path compliant interconnects subjected to drop and impact loading

    Conventional solder balls used in microelectronic packaging suffer from thermo- mechanical damage due to difference in coefficient of thermal expansion between the die and the substrate or the substrate and the board. Compliant interconnects are replacements for solder balls which accommodate this …

    gatech Repository record for Response of multi-path compliant interconnects subjected to drop and impact loading (opens in a new tab)

  9. Study of Interfacial Crack Propagation in Flip Chip Assemblies with Nano-filled Underfill Materials

    No-flow underfill materials that cure during the solder reflow process is a relatively new technology. Although there are several advantages in terms of cost, time and processing ease, there are several reliability challenges associated with no-flow underfills. When micron-sized filler particles …

    gatech Repository record for Study of Interfacial Crack Propagation in Flip Chip Assemblies with Nano-filled Underfill Materials (opens in a new tab)

  10. Quality inspection and reliability study of solder bumps in packaged electronic devices: using laser ultrasound and finite element methods

    … size of electronic packages through the use of solder bump interconnections between the devices and the substrates/printed wiring boards (PWBs). Solder bumps act as not only mechanical, but also electrical interconnections between the device and the substrate/PWB. Common manufacturing defects ¨C …

    gatech Repository record for Quality inspection and reliability study of solder bumps in packaged electronic devices: using laser ultrasound and finite element methods (opens in a new tab)

  11. Electromigration analysis of high current carrying adhesive-based copper-to-copper interconnections

    … and high functional density. Solder bump technology is one of the original, and most common interconnection methods for flip chips. With growing demand for finer pitch and higher number of I/Os, solder bumps have been forced to smaller dimensions and therefore, are subjected to …

    gatech Repository record for Electromigration analysis of high current carrying adhesive-based copper-to-copper interconnections (opens in a new tab)

  12. Digital fringe projection system for measuring warpage of painted and unpainted PBGAs and boards and FEA studies of PBGA warpage

    … may cause serious reliability problems such as solder bump failure and die cracking, warpage control has become a crucial task. Advancements in warpage measurement and prediction would provide important steps toward addressing this concern. Among the various warpage measurement techniques, …

    gatech Repository record for Digital fringe projection system for measuring warpage of painted and unpainted PBGAs and boards and FEA studies of PBGA warpage (opens in a new tab)

  13. UBM Formation on Single Die/Dice for Flip Chip Applications

    … for Flip Chip applications. The UBM (Under Bump Metallurgy) is required in solder bump structure to provide adhesion/diffusion barrier layer, solder wettable layer, and oxidation barrier layer between the bonding pads of the die and the bumps. Typically, UBM is deposited on the whole wafers …

    vt Repository record for UBM Formation on Single Die/Dice for Flip Chip Applications (opens in a new tab)

  14. ELECTROHYDRODYNAMICS (EHD) PUMPING OF LIQUID NITROGEN APPLICATION TO SPOT CRYOGENIC COOLING OF SENSORS AND DETECTORS

    … a combination of saw tooth emitters and a 3-D solder-bump structure should be used. The other major contribution involves the application, for the first time, of the EHD pumping technique to cryogenic liquids. Successful implementation of these cooling techniques could provide on-demand and …

    maryland Repository record for ELECTROHYDRODYNAMICS (EHD) PUMPING OF LIQUID NITROGEN APPLICATION TO SPOT CRYOGENIC COOLING OF SENSORS AND DETECTORS (opens in a new tab)

  15. Entwicklung und Herstellung von photonenzählenden (Cd,Zn)Te-Pixel-Röntgendetektoren für die medizinische Bildgebung

    … wurde herausgefunden, daß sich ein Lötverfahren (solder-bump-bonding) am besten für die Flip-Chip-Montage von (Cd,Zn)Te-Detektoren eignet. Es erfüllt die von den geometrischen Maßen der Bildzellen der Ausleseelektroniken gestellten <br>Anforderungen und genügt den materialspezifischen …

    freiburg-diss Repository record for Entwicklung und Herstellung von photonenzählenden (Cd,Zn)Te-Pixel-Röntgendetektoren für die medizinische Bildgebung (opens in a new tab)

  16. Experimental and theoretical assessment of thin glass panels as interposers for microelectronic packages

    … of 25 x 25 mm and a 10 x 10 mm flip chip with a solder bump pitch of 75 um is then reflow attached to the glass substrate followed by underfill dispensing and curing. The warpage of the flip-chip assembly is measured. In parallel to the experiments, numerical models have been developed. These …

    gatech Repository record for Experimental and theoretical assessment of thin glass panels as interposers for microelectronic packages (opens in a new tab)

  17. End-of-Life and Constant Rate Reliability Modeling for Semiconductor Packages Using Knowledge-Based Test Approaches

    … First of all, the end-of-life AF models for solder joint reliability are studied. The research results show using one universal AF model for all packages is flawed approach. An assessment matrix is generated to guide the application of AF models. The AF models chosen should be either assessed …

    maryland Repository record for End-of-Life and Constant Rate Reliability Modeling for Semiconductor Packages Using Knowledge-Based Test Approaches (opens in a new tab)

  18. Development of Three Dimensional Integration and Packaging Techniques for Complex Communication Systems

    … silicon bulk micromachining for low profile solder bump pad. The LMFC interconnect offers a return loss below 20 dB over 96 % of the 2-110 GHz bandwidth with low insertion loss. Two silicon micromachined features, air cavity and trenches, enable the LMFC to operate up to W-band (75- 110 GHz). …

    umn Repository record for Development of Three Dimensional Integration and Packaging Techniques for Complex Communication Systems (opens in a new tab)

  19. Chip-Package Nano-Structured Copper and Nickel Interconnections with Metallic and Polymeric Bonding Interfaces

    … accomplished today with either wire bonding or solders. Both of these are incremental and run into either electrical or mechanical barriers as they are extended to higher interconnections densities. Downscaling traditional solder bump interconnect will not satisfy the thermo-mechanical …

    gatech Repository record for Chip-Package Nano-Structured Copper and Nickel Interconnections with Metallic and Polymeric Bonding Interfaces (opens in a new tab)

  20. Microelectronics Device Inspection System Implementation and Modeling for Flip Chips and Multi-Layer Ceramic Capacitors

    … production. All of these technologies use solder bumps to attach the active silicon to the substrate, and traditional nondestructive methods such as machine vision, acoustic microscopy or x-ray inspection cannot easily find solder bump defects. Therefore, a system, consisting of an Nd:YAG …

    gatech Repository record for Microelectronics Device Inspection System Implementation and Modeling for Flip Chips and Multi-Layer Ceramic Capacitors (opens in a new tab)

Page 1 of 2