Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Solder paste"”.
-
Variable Frequency Microwave Reflow of Lead-Free Solder Paste
… has put effort into developing lead-free solder paste. The major drawback of lead-free solder is the problems caused by its high reflow temperature. Variable frequency microwave (VFM) processing has been shown to allow some materials to be processed at lower temperatures. Issues addressed …
-
The Evaluation of Solder Paste Characteristics Using AC Impedance Spectroscopy
The monitoring of solder paste characteristics during surface mount circuit assembly procedures is ultimately concerned with obtaining a high yield of reliable solder joints. The process control of solder paste systems under manufacturing conditions is, at present, not derived from on-line …
-
Effects of Solder Paste Volume on PCBA Assembly Yield and Reliability
Solder paste printing is the most common method for attaching surface mount devices to printed circuit boards and it has been reported that a majority of all assembly defects occur during the stencil printing process. It is also recognized that the solder paste printing process is wholly …
-
Modelling and computer simulation of the behaviour of solder paste in stencil printing for surface mount assembly
… facing the electronics manufacturing industry in solder pasteprinting for ultra-fine pitch surface mount and flip-chip assembly is the difficulty inachieving consistent paste deposit volumes from pad-to-pad. At the very small aperturegeometries required for ultra-fine pitch and flip chip assembly, …
-
Liquid-phase diffusion bonding and the development of a Cu-Ni/Sn composite solder paste for high temperature lead-free electrical connections
… that a practical high-temperature lead-free solder could be produced through liquid-phase diffusion bonding (LPDB) of gas-atomized Cu-Ni powder blended with SN100C (Sn-0.7Cu-0.05Ni, wt.%) commercial solder powder, additional research was completed to enable design of a prototype composite …
-
Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications
… an increasing demand for better understanding of soldering technology, particularly in the area of solder pastes used in the reflow soldering of surface mount devices. Successful assembly of electronic devices for ultra-fine pitch and flip-chip applications requires the deposition of small and …
-
On-line non-destructive ultrasonic rheology measurement of solder pastes
… mount technology (SMT) electronics assembly, the solder paste is printed onto the PCB's surface through a stencil and the components are later placed over the solder paste deposits. Since 2007, the use of extremely small SMT components for assembly of SMT devices has been widespread, and achieving …
-
Laser-Induced forward transfer of dense suspensions /
… technique used to transfer materials such as solder pastes from the donor side onto a wide variety of substrates. It has the potential to eliminate ~60% of the defects caused by other solder paste deposit techniques while lowering the deposit size limit and still being time- and cost- …
-
Electrical Characterization of Flux/Substrate Interface
Solderability and processibility of soldering depend upon both the quality of the flux in a solder paste and the surface condition of the substrate of a printed circuit board. A means of monitoring solderability has been developed using both AC and DC electrical techniques. A physical model of …
-
Accelerated Testing Methods for Electromigration-Based Failure in Solder Joints
… to yield resistance over time datasets: SAC305 solder paste specimens with an approximate paste volume of 0.0187 mm3 deposited onto 450 μm diameter ENIG pads, and initial as-reflowed resistance between 0.187 mΩ and 0.298 mΩ, and aluminum wire on gold metallization wedge-wedge wire bond contact …
-
Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance
Solder pastes are complex materials whose properties are governed by many factors. Variations exhibited in solder paste characteristics make it increasingly difficult to understand the correlations between solder paste properties and their printing process performance. The recent EU directives on …
-
Analysis of surface mount technology solder joints
… the quality of surface mount technology (SMT) solder joints are numerous, and complex. The exploration of these factors, and how they may affect the reliability and quality of the joints can only be achieved through continuous research. In this project, essential areas of SMT joints were …
-
NANO-PARTICLE REINFORCED SOLDERS FOR MICROELECTRONIC INTERCONNECT APPLICATIONS
… development of nanocomposite Sn-Pb and Sn-Ag-Cu solders reinforced with various types of nano-particles, the characterization of their microstructural, physical and mechanical properties, and the establishment of their reliability in actual flip-chip applications. <br>The plastic flow properties …
-
The Cross Sectional Shape of Solder Joints Formed in Rectangular Corners During Reflow Soldering
The cross sectional profiles of solder joints formed in upright rectangular corners were characterized metallographically and compared with the theoretically calculated profiles. Solder joints in pretinned rectangular corners in copper specimens were prepared by reflow soldering corners containing …
-
Characterization of Solder Joint Shape for Inverted and Restricted Rectangular Joints
The cross sectional profiles of solder joints with non zero-contact angles formed in upright rectangular corners and inverted solder joints with almost zero-contact angles were characterized metallographically and compared with theoretically calculated profiles. Solder joints in finite tinned …
-
A Study on Process, Strength and Microstructure Analysis of Low Temperature SnBi-Containing Solder Pastes Mixed with Lead-free Solder Balls
As the traditional eutectic SnPb solder alloy has been outlawed, the electronic industry has almost completely transitioned to the lead-free solder alloys. The conventional SAC305 solder alloy used in lead-free electronic assembly has a high melting and processing temperature with a typical peak …
-
THERMAL CYCLING RELIABILITY OF LEAD-FREE SOLDERS (SAC305 AND SN3.5AG) FOR HIGH TEMPERATURE APPLICATIONS
Eutectic tin lead was the most widely used solder interconnect in the electronics industry before the adoption of lead-free legislation. But eutectic tin lead solder has a low melting point (183<super>o</super>C) and was not suited for some high temperature applications, such as oil and gas …
-
Application of Parametric Finite Element Method for Predicting Equilibrium Shapes of Three-dimensional Gullwing Joints
… of a printed circuit board (PCB) with the use of solder paste. The solder is used to form the electrical and mechanical connections between the component and the board. SMT allows placement of more surface mount components (SMC) into smaller and tighter PCB areas (Lau, 1994). A SMC is any …
-
Analysis of Direct-Soldered Power Module / Heat Sink Thermal Interface for Electric Vehicle Applications
… Mounting a power module by directly soldering it onto a heat sink can significantly reduce the thermal impedance at the module / heat sink interface, as compared to the conventional method of bolting the two together with a thermal grease or some other interface materials in between. …
Page 1 of 3