Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Soldering Process"”.

  1. Wetting Analysis of the Ultrasonic-Assisted Soldering Process

    Soldering is a commonly used method to join two non-ferrous metals together, such as bonding copper wires or electrical components to circuit boards. Flux is typically used to remove the oxide layer on the metallic substrate but can release harmful chemicals and degrade the solder joint quality. …

    clemson Repository record for Wetting Analysis of the Ultrasonic-Assisted Soldering Process (opens in a new tab)

  2. Automated convection soldering

    This work defines the critical process parameters involved in soldering multiwire/ flat flex cables and examines the feasibility of process control through automated convection soldering. Evolution of the automated process including determination of critical parameters related to setup, …

    missouri Repository record for Automated convection soldering (opens in a new tab)

  3. Solder joint inspection using thermal transient characteristics

    … data and then employed to develop a preliminary process control chart of the form that could be used to monitor the reliability of the soldering process and signal when problems cause this process to deviate from normal production. The thermal time constants and the associated theoretical thermal …

    texas Repository record for Solder joint inspection using thermal transient characteristics (opens in a new tab) Restricted access

  4. Thermal modelling of the infrared solder reflow process

    … and parametric investigations of the reflow process are performed to determine the important transport mechanisms and quantify the sensitivity of the process to uncertainties in convective and radiative conditions. The response of a typical card under reflow conditions is also presented. …

    texas Repository record for Thermal modelling of the infrared solder reflow process (opens in a new tab) Restricted access

  5. Thermal analysis of surface mounted chip components during reflow soldering using finite element analysis

    … problem that they tend to move during the reflow soldering process. To get an better understanding of the reflow process and the problem of chip movement during reflow, a thermal analysis of type 1206 chip resistors and capacitors was performed using the NASTRAN finite element program. The …

    texas Repository record for Thermal analysis of surface mounted chip components during reflow soldering using finite element analysis (opens in a new tab) Restricted access

  6. Prediction of Solder Joint Geometry in Surface Mount Technology: An Analytical Approach

    … technology is obtained treating upright reflow soldering, inverted reflow soldering and wave soldering. Two mathematical models are developed, one for upright joints and one for inverted joints, to predict two-dimensional joint shape given the solder properties, the height of the joint, and the …

    marquette Repository record for Prediction of Solder Joint Geometry in Surface Mount Technology: An Analytical Approach (opens in a new tab)

  7. An Investigation of Reliability of High Density Electronic Package-to-Board Interconnections from the Perspective of Solder Joint Metallurgy

    … materials and solder alloy composition) and/or soldering process lead to microstructure change in bulk solder and/or at interface, which in turn leads to joint reliability variation.

    aalto Repository record for An Investigation of Reliability of High Density Electronic Package-to-Board Interconnections from the Perspective of Solder Joint Metallurgy (opens in a new tab)

  8. Cordless Telephone Design using Surface Mounted Production Assemblies

    … and an analysis of surface mounted production processes were performed. These were used to compile a set of design rules for developing a miniaturised cordless telephone (transmitting at 1.7 MHz and 47 MHz). Its overall specification and features were based on an existing product manufactured …

    southwales Repository record for Cordless Telephone Design using Surface Mounted Production Assemblies (opens in a new tab) Download PDF for Cordless Telephone Design using Surface Mounted Production Assemblies (opens in a new tab)

  9. Development of a Shifting Melting Point Ag-In Paste Via Transient Liquid Phase Sintering for High Temperature Environments

    … of new attach materials and manufacturing processes will enable the realization of next generation products capable of operating reliably at elevated temperatures. In this investigation a shifting melting point silver (Ag) - indium (In) solder paste that uses a Transient Liquid Phase …

    maryland Repository record for Development of a Shifting Melting Point Ag-In Paste Via Transient Liquid Phase Sintering for High Temperature Environments (opens in a new tab)

  10. Qualification of Metallized Optical Fiber Connections for Chip-Level MEMS Packaging

    … cap chips. A fluxless, and hence organic-free, soldering process joins and seals the fiber-chip assembly on the chip-level. The conditions that govern fluxless soldering are addressed and tailored for success in the developed design. Surface energy models are used to understand the fluxless …

    maryland Repository record for Qualification of Metallized Optical Fiber Connections for Chip-Level MEMS Packaging (opens in a new tab)

  11. Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints

    … a concern with the introduction of new lead-free soldering. Other factors which are known to affect solder joint reliability include the bonding strength, the voiding percentage in joints, the size of the voids and their location within the joint. The work reported in this thesis on formation and …

    greenwich Download PDF for Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints (opens in a new tab)

  12. High-efficiency concentrating PV modules - miniaturization and advanced manufacturing technologies

    … Additionally, parallelized manufacturing processes inspired by the electronics industry can be adapted.<br>The aim of this work is to develop high-throughput manufacturing processes for a novel micro-CPV module concept while achieving very high module efficiencies. The challenge of …

    freiburg-diss Repository record for High-efficiency concentrating PV modules - miniaturization and advanced manufacturing technologies (opens in a new tab)

  13. A study of the thermomechanical reliability of solder joints in surface mount electronics technology

    … been investigated. The events and factors are soldering processes, ambient temperature, joint's architecture, solder material composition, solder-joint common defects and duration of device operation. Two type of components used for the investigation were Ball Grid Array (BGA) and a chip …

    greenwich Download PDF for A study of the thermomechanical reliability of solder joints in surface mount electronics technology (opens in a new tab)

  14. Smáčivost pinů s rozdílnými povrchovými úpravami

    Diplomová práce se věnuje problematice smáčení vývodových součástek. Je zde nastíněna problematika pájení, tvorby pájeného spoje. Nahlíží se na oblast smáčení vývodu, jež bude testována metodou smáčecích vah tak na tvorbu intermetalické vrstvy na pomezí pájka vývod. Tvorba intermetalických vrstev …

    brno-tech Repository record for Smáčivost pinů s rozdílnými povrchovými úpravami (opens in a new tab)

  15. Reliability Assessment of Ion Contamination Residues on Printed Circuit Board

    … from Printed Circuit Board (PCB) assembly processes pose a high reliability risk because they result in damaged circuits. Therefore, it is essential to understand the level of ionic species on the electronic circuitry as well as the reliability risks caused by these contaminants. There are …

    usf Repository record for Reliability Assessment of Ion Contamination Residues on Printed Circuit Board (opens in a new tab)

  16. Návrh a optimalizace procesu pájení skelných pájek

    Bakalářská práce se zabývá skelnými pájkami, jejich fyzikálními vlastnostmi a druhy. Dále práce obsahuje pojednání o metodách ohřevu, pájecích zařízeních, pájecím procesu a materiálové kompatibilitě různých kovových slitin a kovů, ale i těsnících materiálů. Cílem práce je optimalizace pájecího …

    brno-tech Repository record for Návrh a optimalizace procesu pájení skelných pájek (opens in a new tab)