Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 90 for “"Solid propellants"”.
-
Combustion modelling of solid propellants
… of granulated, composite AP/HTPB and double-base solid propellants are studied in thesis. The improvement on the design and safety in industrial processes which use solid propellants are of major importance in industry of energetic materials. Unexpected detonation of granular solid propellants is …
-
Alternative Solid Propellants for Electrothermal Plasma Thrusters
… work has remained focused on traditional gaseous propellants like argon or xenon that require heavy and high-pressure storage tanks. The objective of this thesis is therefore to explore solid-state propellants as a viable alternative for the small-scale electrothermal thruster. While some solid …
-
An experimental investigation of strand burning metallized solid propellants
… of the products of combustion of metallized solid propellant strands at pressures between 250 and 750 psi were investigated using holography and light scattering measurements. In addition, scanning electron microscope and light scattering measurements were used to examine guenched residue. A …
-
The investigation of alternative solid propellants in hall effect thrusters
… documents the process of integrating metallic propellants into a stable, low-power, controllable, and scalable thruster-tank system in sub-kW Hall thrusters that can replicate gaseous propellant performance, suitable for Smallsat platform operation. A novel sublimation-based propellant storage …
-
Tailoring Composite Solid Propellants to Produce a Plateau Burning Profile
… to achieve plateau burning profiles in composite solid propellants. Propellants were formulated using ammonium perchlorate (AP) as the oxidizer and hydroxyl terminated polybutadiene (HTPB) for the binder and fuel. Unlike the linear relationship of a typical propellant, plateauing propellants will …
-
An experimental investigation of the behavior of metallized solid propellants.
The combustion behavior of metallized solid propellants at pressures between 100 and 750 psi was investigated using high speed motion pictures together with scanning electron microscope and light diffraction examinations of collected residue. A reduced smoke ZrC propellant and two propellants with …
-
Thermomechanical Meso-Scale Modeling of Combustion of Heterogeneous Solid Propellants
In the final part of this dissertation, the coupled thermomechanical and propellant surface regression solver is further enhanced through addition of fluid-phase equations for transport of chemical species and temperature. A simple three-step kinetics model is used to describe the complex reactions …
-
Exploration and Development of Electrically Controllable Gel and Solid Propellants
Electrically controllable propellants (ECPs) provide a new method to increase the control and functionality of rocket motors in particular solid rockets. Traditional solid rockets do not have the capability to modify the burning rate on demand during operation, which greatly limits operational …
-
Novel Nanostructures And Processes For Enhanced Catalysis Of Composite Solid Propellants
… is to examine the burning behaviour of composite solid propellants (CSP) in the presence of nanoscale, heterogenous catalysts. The study targets the decomposition of ammonium perchlorate (AP) as a key component in the burning profile of these propellants, and seeks to identify parameters of AP …
-
Measurement and Modeling of Pressure -Driven Transient Burning of Solid Propellants
… models, applicable to fine oxidizer composite propellants, are examined. The ""surface accumulation model"" supposes that components accumulate in a layer at the surface. Each component reaches an equilibrium concentration inversely proportional to its burning rate. The ""double reaction layer …
-
Comparison of Cation-Anion Oxidizer Pairings in Electrically Controllable Solid Propellants
Electrically controllable solid propellants are an area of interest as a viable solution to the lack of throttle-ability in solid propellant rocket motors. Existing studies have focused on propellants compositions using hydroxyl-ammonium nitrate, ammonium nitrate, or lithium perchlorate as …
-
Advancements in the Operation and Fabrication of Electrically Controlled Solid Propellants
… and perchlorate-based electrically controlled solid propellants (ECSPs). Sodium and lithium-based nitrates and perchlorates were formulated with polyethylene oxide as the binder and carbon black as a conductive additive via a solution casting process. The resulting propellants formed a polymer …
-
Methods and analyses for evaluation of erosive burning in solid propellants
… models for erosive burning in composite propellants were reviewed. The experimental techniques which were cited in the literature for the measurement of erosive burning were also reviewed. Only the high-speed motion picture technique was found to have resolution sufficiently high to …
-
The Effects of Density on Burning Rates of AP/HTPB Composite Solid Propellants
Within identical composite solid AP/HTPB propellant formulations, the densities of each individual propellant can greatly vary depending on their manufacturing quality. Propellants with lower densities than their theoretical maximum densities usually indicate the presence of air bubbles, or voids, …
-
A study of the burning rates of composite solid propellants in acceleration fields.
… average burning rates of a series of composite solid propellants were measured in acceleration fields up to 1000 G using a combustion bomb mounted on a centrifuge. The propellants were burned at constant pressures of 500, 1000, and 1500 psia. Specially prepared motors allowed the study of the …
-
Analysis of the Burning Rate Behavior of Self-Extinguishing AP/HTPB Composite Solid Propellants
Solid rocket motors are utilized for propulsion due to their low design complexity. Solid fuel can be stored for long periods of time in a combustion chamber, and no additional components are required to sustain combustion once ignition has been achieved. However, one major drawback in solid …
Page 1 of 5