Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Solid retention time"”.
-
Effect of Feed Rate and Solid Retention Time (SRT) on Effluent Quality and Sludge Characteristics in Activated Sludge Systems Using Sequencing Batch Reactors
… of activated sludge systems is efficient solid liquid separation achieved by bioflocculation. Bioflocculation refers to the process of microbial aggregation to form activated sludge flocs, dependent on the interaction of exocellular polymeric substances (EPS) to form the matrix that holds …
-
Compost Bioreactors for Removing Agricultural Chemicals From Tile Drainage Water
… The extent of nitrate removal depended on the solid retention time, but could also have been influenced by the amount of compost in the column that could be utilized as an energy source by denitrifying microorganisms. The results of this study suggested that relatively immature compost may have …
-
Post-treatment of anaerobic effluents
… performance for organic removal due to its good solid-liquid separation. In addition, the longer solid retention time (SRT) of MBR enhanced the degradation of less biodegradable substances. In phase 2, raw sewage was added to the anaerobic effluents to increase the organics in feed. It was found …
-
Effects of Testing Time on Anaerobic Toxicity Assessment
… toxicity tests with varied concentration and solid retention time. These tests were designed to demonstrate the impact of ammonia- nitrogen and sodium chloride on the biological degradation process. The anaerobic test set-up includes bench-scale test reactors and respirometers used for …
-
Development of a Compact, Energy-Positive Food Waste Treatment Process
… In this operating condition, removal of volatile solids (VS) of 88±2%, Hydrogen production of 3.45 L/ kg of VS added and volatile fatty acid yield of 571 g chemical oxygen demand (COD)/ kg of VS added were observed only in a reaction time of 14 d. Part of FW remained in the LBR, accounting for …
-
Coupling of phosphorus recovery to an enhanced biological phosphorus removal process through a sidestream : a pilot scale study
… of phosphorus as struvite. The minimum hydraulic retention time required in the phosphate release unit was found to be around one to two hours, above which there was no considerable amount of phosphate released. Potentially, up to 78% of the incoming phosphorus is estimated to be recovered by …
-
Effect of Solids Retention Time on the Denitrification Potential of Anaerobically Digested Swine Waste
… The reactors were used to test the effect of solid retention time (SRT) on CH4 yield, total ammonia nitrogen (TAN) concentrations, % volatile solids (VS), chemical oxygen demand (COD) and volatile fatty acids (VFA) removal, readily biodegradable COD concentration and the denitrification …
-
Removal of Endocrine Disrupting Compounds Using Membrane Bioreactor
… sludge processes are designed to degrade solids, organic carbon and nitrogen loading. Although several treatment steps in a wastewater treatment plant can contribute to partial removal of EDCs, effective removal has been a challenge due to their resistant chemical and biological …
-
Performance of temperature-phased anaerobic digestion (TPAD) system treating grocery food waste and agro-waste
… waste coupled with production of Class A biosolids and higher biogas generation. More importantly, TPAD process enhances the oil and grease biodegradation that is found in high fat-content waste streams such as post-consumer food waste streams rich in meats, dairy products, and fatty greases …
-
Characterization of residual soluble Cod in entrapped-mixed-microbial-cell and activated sludge process
… aeration with HRT 6hr. Due to the longer SRT (solid retention time) for EMMC process, the MWD patterns and composition of the residual soluble COD (RSCOD) for the treated effluent of the EMMC are different from those of ASP when operated under the same HRT and aeration time. The study on the …
-
CultiCultivating aerobic granular sludge in a lab-scale sequencing batch reactor - Removal of pharmaceutically active compounds, total phosphorus, total nitrogen and organic matter from a complex synthetic wastewater
… based on the assessment of total suspended solids (TSS), volatile suspended solids (VSS), sludge volume index (SVI), solid retention time (SRT), and sludge morphology by light microscopy. Results showed that the formation of aerobic granules was initiated, but not fully achieved during the …
-
Performance Evaluation of a New Multi-Environment Wastewater Treatment System for the Removal of Carbon, Nitrogen and Phosphorus from Synthetic and Real Agricultural Wastewaters
… loading rates of 0.015 to 0.035 kg TP/m3.d. The solid retention time and hydraulic retention time were in the range of 12 to 33 days and 1.43 to 1.74 days, respectively. The overall COD/N/P and BOD/N/P ratio were maintained at the range of 27:4.5:1 to 70:3.64:1 and 26:4.5:1 to 69:3.64:1, …
-
Effect of size, coating and concentration of zinc oxide nanoparticles on anaerobic digestion of municipal wastewater sludge
… and 150 (high) mg NP/g mixed sludge total solids (TS). In the second stage, four mesophilic and four thermophilic semi-continuously fed digesters were set-up with an effective volume of 500 mL. The effect of NPs on the performance of biogas/methane production, organic solids removal, and …
-
A Comprehensive Assessment of a Mixed Microbial Community Structure and Functional Dynamics for PFAS Biodegradation
… nanohybrids and operational parameters (pH, solid retention time (SRT), ammonium) on PFOA biotransformation efficiency, and (iii) evaluating the impact of different external carbon sources to promote co-metabolization of PFOA and the impact of carbon and PFOA on functional genes of exposed …
-
Anaerobic baffled reactor pilot: bridging the gap to energy positive wastewater treatment
… processes, which require energy and maximize solids production. Mainstream anaerobic treatment of domestic wastewater has the potential be to the sustainable treatment scheme of the future because of the energy generation potential, lower energy requirements and reduced solids generation. A …
-
Model-based optimization and scenario planning for a large-scale water resource recovery facility
… projects is an expensive and time-consuming task, a data scarcity is the prevailingproblem. Additionally, the path of the WWTP due to its operational and design conditions, the pathway through which it ismodeled is also unique, challenging, and worth investigating. This thesis …
-
Estimation of Greenhouse Gas Emissions in Wastewater Treatment Plant of Pulp & Paper Industry
… of steady-state models in predicting the time-dependent emissions of these harmful gases, thus justifying the use of dynamic model. Aerobic, anaerobic, and hybrid - anaerobic/aerobic - biological processes were used as the main treatment processes. In addition, anaerobic digestion for …
-
Evaluation of a ceramic membrane bioreactor functioning under non-steady state operational parameters for the removal of pollutants from municipal wastewater plant effluent
… bioreactor technology for microorganism and solid retention is very broad and the development and application thereof is being driven by both fresh water shortage and anticipated stringent environmental regulations. Very little research is done on membrane bioreactors (MBRs) functioning under …
-
Anaerobic side-stream reactor: a sustainable solution for sewage sludge reduction
… two important operating parameters, such as the solid retention time (SRT) of the ASSR and the interchange rate (IR), which means the percentage of biomass cycled into the ASSR, had been uncovered Given this, the experimental system was started up and reached a stable condition after 60 days. The …
-
Παραγωγή ενέργειας με αεριοποίηση ιλύων από μονάδες βιολογικών καθαρισμών
… allothermal bench scale batch gasifier and the solid residues (char), the gaseous products (CO2, H2, CO, CH4) and the tar byproduct were quantitatively and qualitatively analyzed. The results were evaluated with assessment models of the energy efficiency in comparison with the heating value of …