Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Solid-state sintering"”.

  1. Grain Coalescence and Modeling of Nanosized Zirconia in Solid-state Sintering

    … teeth and achieving high hardness of 3Y-TZP. Sintering behavior of the nanosized powder was characterized and compared with the conventional coarse counterpart. It was found that the nanosized powder grew extensively during initial sintering stage, with an observation of irregular shaped …

    nus Repository record for Grain Coalescence and Modeling of Nanosized Zirconia in Solid-state Sintering (opens in a new tab) Download file for Grain Coalescence and Modeling of Nanosized Zirconia in Solid-state Sintering (opens in a new tab)

  2. The timescales and consequences of solid-state sintering in volcanic systems

    … magmas is governed by the volume and pressure state of magmatic gases. Reductions in permeability can promote explosivity. At the elevated pressure-temperature conditions endemic to volcanic systems, permeable pathways are ephemeral and can be destroyed by densification processes. The …

    ubc Repository record for The timescales and consequences of solid-state sintering in volcanic systems (opens in a new tab) Download PDF for The timescales and consequences of solid-state sintering in volcanic systems (opens in a new tab)

  3. Atomistic and Mesoscale Modeling of Microstructure Development During Solid-state Sintering

    … nanoscale features. Of particular interest is solid-state sintering, known for creating complex and high-precision geometries with controlled microstructures. While sintering science has been the subject of active research, very little is known about the impact of GB geometry on sintering …

    clemson Repository record for Atomistic and Mesoscale Modeling of Microstructure Development During Solid-state Sintering (opens in a new tab)

  4. Atomistic and Mesoscale Modeling of Microstructure Development During Solid-state Sintering

    … nanoscale features. Of particular interest is solid-state sintering, known for creating complex and high-precision geometries with controlled microstructures. While sintering science has been the subject of active research, very little is known about the impact of GB geometry on sintering …

    clemson Repository record for Atomistic and Mesoscale Modeling of Microstructure Development During Solid-state Sintering (opens in a new tab)

  5. Microscopic Simulation of Solid State Sintering Regarding Irregularly Shaped Powder Particles

    Es wurde ein neuartiges Modell der Sinterung zweier bzw. weniger Teilchen unter Verwendung scharfer Grenzflächen entwickelt und implementiert. Die Anwendung des thermodynamischen Extremalprinzips erlaubt eine elegante und erweiterbare Formulierung. Das numerische Verhalten des Modells unter …

    qucosa-diss

  6. Simulating the solid-state sintering of nanoparticles in a powder bed configuration

    … document presents an approach to modelling the sintering of nanoparticles for applications in solid-state diffusion micro–Additive Manufacturing processes like the novel Microscale Selective Laser Sintering process. The simulations presented here use the Discrete Element Method and Phase Field …

    texas Repository record for Simulating the solid-state sintering of nanoparticles in a powder bed configuration (opens in a new tab)

  7. Development of Novel Processing Routes for Electrical Ceramics and Glass-Ceramics

    … three different processing routes, conventional solid-state sintering, microwave sintering and melt processing, to manufacture electrical ceramics and glass-ceramics in bismuth sodium titanate (BNT) and potassium sodium niobate (KNN) systems. Manufacturing electrical ceramics using a conventional …

    sheffield-hallam Repository record for Development of Novel Processing Routes for Electrical Ceramics and Glass-Ceramics (opens in a new tab) Download PDF for Development of Novel Processing Routes for Electrical Ceramics and Glass-Ceramics (opens in a new tab)

  8. Influence of the processing route on oxide transformation in austenitic Fe-19Mn-18Cr-C-N PM steel

    The present work deals with the analysis of oxide state in the Fe-19Mn-18Cr-C-N (X40MnCrN19- 18) powder steel in densified state by surface sensitive analysis techniques. The steel powder was densified by different powder metallurgical manufacturing techniques (hot isostatic pressing (HIP), …

    chalmers Repository record for Influence of the processing route on oxide transformation in austenitic Fe-19Mn-18Cr-C-N PM steel (opens in a new tab)

  9. Processing of Boron Carbide

    The processing of boron carbide powder including sintering optimization, green body optimization and sintering behavior of nano-sized boron carbide was investigated for the development of complex shaped body armor. Pressureless sintered B4C relative densities as high as 96.7% were obtained by …

    gatech Repository record for Processing of Boron Carbide (opens in a new tab)

  10. Sintering and its enhancement in ferrous powder compacts

    Sintering maps have been developed for pure iron compacts. The maps have been drawn as a function of various sintering parameters such as particle size, green density, time and temperature. Two sets of diagrams have been drawn to define the sintering kinetics, namely, the field map and the neck …

    ubc Repository record for Sintering and its enhancement in ferrous powder compacts (opens in a new tab) Download PDF for Sintering and its enhancement in ferrous powder compacts (opens in a new tab)

  11. High Density supersolidus liquid phase sintering of steel powders

    In this study, supersolidus liquid phase sintering (SLPS) of an industrially relevant Fe-C-Mo alloy powder was investigated with particular attention to the evolution of density and porosity. The material was produced by mixing graphite with a prealloyed Fe-Mo alloy. Differential Scanning …

    ubc Repository record for High Density supersolidus liquid phase sintering of steel powders (opens in a new tab) Download PDF for High Density supersolidus liquid phase sintering of steel powders (opens in a new tab)

  12. Morphotropic Phase Boundary Engineering in Ferroelectrics

    … have been prepared by sol-gel method and solid state sintering process. The temperature dependences of dielectric constant and loss at different frequencies for all compositions were characterized and analyzed. For xBSCT-(1-x)BZT ceramics with 20% Ba in BCT substituted by Sr, the …

    maryland Repository record for Morphotropic Phase Boundary Engineering in Ferroelectrics (opens in a new tab)

  13. Process Kinetics of Transient Liquid Phase

    … techniques for quantifying the isothermal solidification process during transient liquid phase sintering (TLPS) in binary isomorphous systems such as Ni-Cu, and the resulting uncertainty regarding the solidification mechanism and its sensitivity to important process parameters, has been …

    waterloo Repository record for Process Kinetics of Transient Liquid Phase (opens in a new tab)

  14. Equal channel angular pressing of elemental & alloyed P/M aluminium systems

    … to increase density of powder compacts after sintering via severe plastic deformation. Solid state sintering of pure aluminium and liquid phase sintering of a commercial Al-Sn bearing alloy were analysed with industrial collaborative support. The use of room temperature ECAP to these sintered …

    birmingham Download PDF for Equal channel angular pressing of elemental & alloyed P/M aluminium systems (opens in a new tab)

  15. Evaluating Processing–Property Relationships in Metallic Alloys and Metal-Ceramic Composites Fabricated with Direct-Write Technique

    … processing was carried out using pressureless-solid state sintering. Slurries with different powder particle size distributions were designed to control the interfacial free energies and volume specific surface area, which act as the driving forces for densification in pressureless sintering. A …

    unt Repository record for Evaluating Processing–Property Relationships in Metallic Alloys and Metal-Ceramic Composites Fabricated with Direct-Write Technique (opens in a new tab)

  16. SOLID STATE SYNTHESIS OF MULTICOMPONENT RARE-EARTH OXIDE CERAMICS

    … is determined by a combination of composition, sintering atmosphere, and cooling rate. Polycrystalline ceramics comprising various combinations of Ce, Gd, La, Nd, Pr, Sm, and Y oxides in equiatomic proportions were synthesized by solid-state sintering. The effects of composition (type and number …

    ut-knoxville Repository record for SOLID STATE SYNTHESIS OF MULTICOMPONENT RARE-EARTH OXIDE CERAMICS (opens in a new tab)

  17. Fabrication of biomedical cancellous NiTi by starch consolidation of pre-alloyed powder

    … be achieved. One fabrication method is starch consolidation followed by solid state sintering. It implies using starch as both binder and pore former. With pre-alloyed NiTi powder, this method and loose powder sintering are evaluated by mechanical tests and analysis of microstructure in this …

    chalmers Repository record for Fabrication of biomedical cancellous NiTi by starch consolidation of pre-alloyed powder (opens in a new tab)

  18. Sintering behaviour of cupronickel alloy powder

    Studies have been made of both the solid state and supersolidus sintering characteristics of spherical cupronickel powders. Observations were made of the structural changes and shrinkage rates in specimens sintered in vacuum and in hydrogen. It was concluded that the early stage of solid state …

    ubc Repository record for Sintering behaviour of cupronickel alloy powder (opens in a new tab) Download PDF for Sintering behaviour of cupronickel alloy powder (opens in a new tab)

  19. Solid Solution in the systems BiMO3-ATiO3 (M=Fe, Cr; A=Ba, Sr) Synthesis, structure and magnetic properties

    … and to predict new multiferroic materials, solid solutions of multiferroic materials have been studied. For this thesis, polycrystalline samples of the binary solid solutions xBiMO3-(1-x)ATiO3 (M = Fe or Cr; A = Ba or Sr; x = 0, 0.2, 0.4, 0.5, 0.6, 0.8 and 1) were prepared by solid state …

    chalmers Repository record for Solid Solution in the systems BiMO3-ATiO3 (M=Fe, Cr; A=Ba, Sr) Synthesis, structure and magnetic properties (opens in a new tab)

Page 1 of 3