Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 7797 for “"Solids"”.
-
Interface dynamics of soft solids with liquids, solids, and gels
Soft solids are commonly composed of polymeric networks suspended in liquids while maintaining their physical form. They have intermediate properties between viscous liquids and elastic solids, which are easily deformed even by small stresses (e.g., the interfacial tension with liquid droplets) but …
-
Cactus Based Solids
Biological materials have always been on the forefront of the development of novel materials either through the use of the biological material itself or via the development of bioinspired materials that mimic the structures observed in nature. Plant fibres specifically have demonstrated significant …
-
Spectral analysis of total suspended solids mixtures for solids composition determination
Total Suspended Solids (TSS) analysis provides an initial and very basic measure for study and characterization of water quality. The present tedious procedures used for the identification of different solids constituents present in TSS and for the classification or insight into the origins of …
-
Regular and perfect solids
… of <i>B</i> is composed of faces which are solids of a lower dimension. A flag of <i>B</i> is a sequence (<i>A</i><sub>0</sub>,...,<i>A</i><sub>r</sub>) of distinct proper faces of <i>B</i> such that A<sub>j-1</sub> is contained in <i>A</i><sub>j</sub>, <i>j</i> = 1,...,<i>r</i>. A flag is …
-
Multifunctional Hierarchical Cellular Solids
… their peculiar low density properties, cellular solids are widely used in industries and play a very important role in our daily life. Two of the most studied celluar solids are honeycombs and foams. With the development of nanotechnology, another kind of cellular solids - carbon based materials …
-
Attrition of particulate solids
… namely that in failure zones of deforming solids, to be considered in isolation. Sample weights of 100 gm were more than sufficient and the results were found to be reproducible, systematic and generally independent of sample size.</p> <p>Several close-sized material in the size range …
-
Pulsed Optoacoustics in Solids
… and characterize target materials including solids, liquids and gases. Included in such applications are diagnoses of thin films and semiconductor materials. The need to obtain greater spatial resolution requires the generation of shorter optoacoustic pulses. For such pulses, non-thermal …
-
Spin dynamics in solids
The work described in this thesis falls into two largely unrelated categories. Part I of the thesis reports unusually fast 13C spin diffusion in adamantane. A calculation of the 13C spin-diffusion rate from first order perturbation theory is presented and compared to the experimental data. There is …
-
Theoretical strength of solids
Theoretical strength of solids is defined as the ultimate strength beyond which plastic deformation, fracture, or decohesion would occur. Understanding the microscopic origin from quantum mechanics and thermoelastic formulation is of great importance to mechanical properties and engineering design …
-
Substitution of foam spray-dried acid whey solids for buttermilk solids in chocolate cake
Thesis (M.S.)--Michigan State University. Dept. of Foods and Nutrition, 1966
-
Cutting mechanics of soft solids
Cutting mechanics of soft solids has been of growing interest due to its promising benefits in material characterization and other industrial applications. However, a full understanding of the physical phenomena is still missing, and several questions remain outstanding. In this thesis, we explore …
-
The Flow of Fluidised Solids
The design and construction of a large test rig comprising an open sloping channel along which fluidised particulate materials may flow is described. A large number of experiments have been performed in this rig, aimed at establishing the rheological properties of a bed of flowing sand under a wide …
-
Chemical pressures in crystalline solids
… pressure (CP) in molecules (H2 , CO2 , S8 ) and solids exhibiting all kinds of chemical interactions: covalent (graphene, diamond), ionic (alkali halides and hydrides), metals (group 1 and group 15 elements), van der Waals (solid CO2 and S8 , graphite) and hydrogen bonds (ice-I). From the …
-
Some hyperfine interactions in solids
<p>This thesis describes electron nuclear double resonance (ENDOR) measurements of hyperfine interactions in various rare-earth systems. A Q-band (8 mm.) ENDOR spectrometer built to perform experiments on Yb<sup>171</sup> and Yb<sup>173</sup> in CaF<sub>2</sub> and Gd<sup>155</sup> and …
Page 1 of 390