Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Solids suspension"”.
-
Experimental determination of solids suspension with angled impeller in a pharmaceutical mixing vessel
… is that they are capable of suspending small solids dispersed in the liquid. Therefore, it is critical to know the value of the minimum agitation speed at which solids become just suspended,N_{js}. Despite their common use in industry, and especially the pharmaceutical industry, these systems …
-
Solids suspension and power dissipation in stirred tanks agitated by an impeller near the tank bottom
… the tank bottom, C, on complete solid off-bottom suspension, Njs, was investigated. Four types of impellers were used six-blade flat-disk turbine, six-blade flat-blade turbine, six-blade flat (45 degreees) pitched-blade turbine, and the high efficiency impeller Chemineer HE-3. The effects of the …
-
Experimental determination of the agitation requirements for solids suspension in dissolution systems using a mini paddle apparatus
… the determination of the fraction of unsuspended solids in the vessel at different agitation speed (N_{js}-D_s method). The results of this method agree well the visually observable values of N_{js}(N_{js-visual}). Once new method was validated in mini vessels, N_{js} was experimentally measured …
-
Effect of impeller submergence on power dissipation and solids suspension in mixing systems equipped with pitch-blade turbines
Mixing and dispersion of solids in a liquid is a process frequently encountered in the pharmaceutical industry and often conducted in cylindrical baffled tanks stirred by mechanical impellers. In operations where the liquid level is decreased (as often which emptying the tank) the process must be …
-
The use of electrical resistance tomography to determine the minimum agitation speed for solids suspension in stirred tank reactors
… can be visually obtained by determining when the solids stay at the bottom of the tank for no more than 1-2 seconds before being swept away. Although this has been shown to be a reliable method, it still relies on visual observation of the bottom of the vessel and it is therefore potentially …
-
Novel experimental method for the determination of the minimum agitation speed for solids suspension in flat-bottomed stirred tank reactors
… speed, Njs, required to suspend finely divided solids in vessels stirred by an impeller is a critical parameter to properly operate industrial tanks in a large number of industrial operations. The most common experimental approach to measure N_{js} is that of Zwietering’s (Chem. Eng. Sci., 1958, …
-
Concurrent evaporating spray jets in dilute gas-solid pipe flows
Evaporating spray jets into gas-solids suspensions are encountered in many industrial applications. The rapid evaporation of spray jets has significant effects on the gas-solids mixing near the jet nozzle regions, including non-uniform solids concentration dilution, gas/solids temperature …
-
Design and Synthesis of Acrylic Dispersants for Non-aqueous Dispersion Polymerization
… coating formulations are heterogeneous high-solids suspension of polymeric nano-size particles (< 200 nm) produced by radical polymerization in organic hydrocarbon medium. An important component of the system is the low molecular weight (MW) reactive polymeric dispersant (5000-6000 Da), which …
-
Injection Impairment by Suspended Solids: Well Models, Filtration Parameters, and Models’ Validation with 3-D Injection Experiments
… loss of injectivity. Water injection, without solids suspension, at high velocity generates a loss of injectivity as a non-Darcy flow effect. The compounding impacts of high injection fluid velocity with suspended solids are expected to produce more severe injectivity loss than water alone. The …
-
Uso urbano não potável de água de lagoas do sistema de drenagem de Natal
… hardness, calcium and magnesium hardness, total solids, TSS, TDS, COD and SAR°. To utilization on pisciculture we recommend use in ponds which presents the best quality. Only one pond presented higher pollutants and it not being appropriated for use in cooling tower. The content of solids …
-
Wellbore Cleanout in Inclined and Horizontal Wellbores – The Effects of Fluid Rheology, Inclination, and Solids Density.
… well completion problems such as deposition of solids in the wellbore and increased Non-Productive Time (NPT). The reduction of NPT depends on factors influencing the mechanism of solids transport. The dominance of gravity over buoyancy forces the solids to settle vertically downwards …
-
Single and multiphase mixing in partially filled stirred vessels
… in a single liquid phase and in solid-liquid suspensions. Flat-bottomed, baffled vessels (5L, 12L, 20L and 170L) equipped with a single disk turbine (DT) of four different sizes placed at five different impeller off-bottom clearances were used here to study the system's hydrodynamics and …
-
Hydrodynamic characterization of laboratory and production equipment for pharmaceutical testing and manufacturing using experimental and computational approaches
… to achieve the just-suspended off-bottom solid suspension state in liquids in stirred vessels is an issue of significant importance in pharmaceutical processes. Here, Nis is computationally predicted for a stirred, fully baffled vessel provided with different axial or radial impellers using an …