Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 85 for “"Solubility parameter"”.

  1. Determination of Solubility Parameter of Methane in Heavy Oil

    … different temperatures and pressures. The input parameters of the MRS model are the mole fractions, molar volumes, and solubility parameters of the bitumen (characterized into SARA fractions), and the n-alkane solvent. However, the MRS model is not yet able to predict asphaltene solubility in the …

    calgary Repository record for Determination of Solubility Parameter of Methane in Heavy Oil (opens in a new tab)

  2. Determination of Solubility Parameter of Carbon Dioxide in Heavy Oil

    … (oils with dissolved gases) partly because the solubility parameters of the dissolved gases are required, but not known. The objective of this study is to determine the solubility parameter of dissolved carbon dioxide (CO2). Live oils were prepared from Western Canadian bitumen and CO2 and the …

    calgary Repository record for Determination of Solubility Parameter of Carbon Dioxide in Heavy Oil (opens in a new tab)

  3. Thermophysical Properties and Solution Thermodynamics of Hydrocarbon Systems at High Tempeartures and Pressures

    … accurate approaches for property evaluations and solubility behavior predictions are in need, especially for complex hydrocarbon systems under extreme conditions, to which current methods may not be successfully applied. The solubility parameter is an inherent property of a material and also a key …

    rice Repository record for Thermophysical Properties and Solution Thermodynamics of Hydrocarbon Systems at High Tempeartures and Pressures (opens in a new tab)

  4. Θερμοδυναμική μελέτη διαλυμάτων υπερδιακλαδισμένων πολυμερών

    … Experimental data for the partial and total solubility parameters were correlated using the NRHB theory and a satisfactory agreement between the calculated and experimental data was observed. Furthermore, the phase behavior of the ternary system Hybrane-Ethanol-CO2 was investigated. The …

    greece Repository record for Θερμοδυναμική μελέτη διαλυμάτων υπερδιακλαδισμένων πολυμερών (opens in a new tab)

  5. Effect of Refining on Asphaltene Property Distributions

    Asphaltenes are a solubility class and are defined as the part of a crude oil that is soluble in toluene and insoluble in n-heptane. Asphaltene precipitation, and subsequent fouling, is a potential issue in refining when feedstock and/or process streams are blended. While asphaltene precipitation …

    calgary Repository record for Effect of Refining on Asphaltene Property Distributions (opens in a new tab)

  6. The synthesis and characterization of chlorinated polyethylene-g-styrene and its application as a blend modifier.

    … and unreacted chlorinated polyethylene. Solubility behavior of CPE and polystyrene in various solvents was studied and the solubility parameter was estimated from the solubility result. The compositions of the separated fractions were determined by infrared spectroscopy (IR) so that the …

    oklahoma-thes Repository record for The synthesis and characterization of chlorinated polyethylene-g-styrene and its application as a blend modifier. (opens in a new tab)

  7. Rational synthesis of nanoparticle-MWCNT hybrid nanostructures through non-covalent interactions with organic polymers

    … used during the functionalisation was the parameter that had a higher effect in the amount of polystyrene found in the MWCNTs. The surface energy solubility parameter theories were proposed as a predictive synthetic model for the design of polymer functionalised MWCNTs. The predictions of …

    oxford Repository record for Rational synthesis of nanoparticle-MWCNT hybrid nanostructures through non-covalent interactions with organic polymers (opens in a new tab)

  8. Aspects of self stratifying coatings

    … can be seen to be dependent upon the solubility of pairs of polymers in common solvents; the occurrence of phase separation and subsequent layer formation. The solubility of commercial resin pairs in common solvents has been studied using the three - dimensional solubility parameter of …

    city-london Download PDF for Aspects of self stratifying coatings (opens in a new tab)

  9. Computational prediction of enhanced solubility of poorly aqueous soluble drugs prepared by hot melt method

    Solubility is the concentration of a solute in a saturated solution at a given temperature and pressure. Solubility of a drug in aqueous media is a pre-requisite to achieve desired concentration of a drug in the systemic circulation. Low aqueous solubility is a major problem encountered with …

    u-pacific Repository record for Computational prediction of enhanced solubility of poorly aqueous soluble drugs prepared by hot melt method (opens in a new tab)

  10. Integration of Simulation and Deep Learning in Health and Safety

    … points). For the first project, a Hildebrand solubility parameter prediction model using ensemble learning methods is established for predicting promising solvents for newly developed polymers. Compared with determining the solubility parameter experimentally, the ensemble learning models can …

    tamu Repository record for Integration of Simulation and Deep Learning in Health and Safety (opens in a new tab)

  11. Solubility Enhancement via Melt Extrusion: Drug-polymer Solubility, Physicochemical Characterization and Quality by Design

    … is a very widely applied technique for solubility enhancement of water insoluble drugs. In order to form stable solid dispersions it is important to select appropriate excipients that will maintain the drug in its amorphous form for an extended period of time. Selection of appropriate …

    mississippi Repository record for Solubility Enhancement via Melt Extrusion: Drug-polymer Solubility, Physicochemical Characterization and Quality by Design (opens in a new tab)

  12. SOLUBILIZATION OF SOME POORLY SOLUBLE DRUGS BY COSOLVENTS (FORMULATION, IDEALITY, POLARITY).

    … log (S(m)/S(w)) = Σf₁σ₁ where S(m) is the solubility of the drug in the cosolvent-water mixture, S(w) is the solubility of the drug in water, f₁ is the volume fraction of cosolventi and σ₁ is the slope of the log(S(m)/S(w)) vs. f₁ plot. In most cases, some positive or negative deviation …

    arizona-thes Repository record for SOLUBILIZATION OF SOME POORLY SOLUBLE DRUGS BY COSOLVENTS (FORMULATION, IDEALITY, POLARITY). (opens in a new tab)

  13. Synthesis and Characterization of Hydrogels Based on Poly (N-vinyl formamide)

    … with an increase in crosslinking density. Other parameters like solubility parameter of the polymer and crosslink density were also calculated using established theories. The crosslink density was calculated from the shear modulus using the phantom network model of rubber elasticity and was on …

    ku Repository record for Synthesis and Characterization of Hydrogels Based on Poly (N-vinyl formamide) (opens in a new tab)

  14. Hydrotropic extraction of hydrocarbon mixtures

    … determined solubilities. The semi-empirical solubility parameter approach resulted in answers that were extremely low. A purely theoretical approach involves the calculation of dispersion forces between molecules. An equation for predicting solubilities has been derived so that it is …

    njit Repository record for Hydrotropic extraction of hydrocarbon mixtures (opens in a new tab)

  15. ΘΕΡΜΟΔΥΝΑΜΙΚΗ ΜΕΛΕΤΗ ΤΗΣ ΕΞΑΕΡΩΣΗΣ ΔΙΑΛΥΜΑΤΩΝ ΜΕ ΤΗ ΒΟΗΘΕΙΑ ΤΗΣ ΑΕΡΙΟΧΡΩΜΑΤΟΓΡΑΦΙΑΣ ΑΝΑΣΤΡΕΦΟΜΕΝΗΣ ΡΟΗΣ

    … WITH MORE COMPONENTS. 3) TO THE DETERMINATION OF SOLUBILITY PARAMETER OF A SOLUTE IN A MIXTURE WITH WATER, AND 4) FINALLY, SOME POLYMER SOLUTIONS WERE STUDIED AND ACTIVITIES, WEIGHT FRACTION ACTIVITY COEFFICIENTS OF CYCLOHEXANE IN CYCLOHEXANE/POLYSTYRENE SOLUTIONS AS WELL AS INTERACTION PARAMETERS …

    greece Repository record for ΘΕΡΜΟΔΥΝΑΜΙΚΗ ΜΕΛΕΤΗ ΤΗΣ ΕΞΑΕΡΩΣΗΣ ΔΙΑΛΥΜΑΤΩΝ ΜΕ ΤΗ ΒΟΗΘΕΙΑ ΤΗΣ ΑΕΡΙΟΧΡΩΜΑΤΟΓΡΑΦΙΑΣ ΑΝΑΣΤΡΕΦΟΜΕΝΗΣ ΡΟΗΣ (opens in a new tab)

  16. Thermal Degradation of Fire Retardant Formulations and Dispersion of Clay in Polymer/Clay Nanocomposites

    … In Part III, the relationship between the solubility parameter of polymer and the clay dispersion in polymer-clay nanocomposites is explored based on a model study and previous results to suggest a criterion for the clay morphology. The concept of solubility parameter is introduced as a …

    marquette Repository record for Thermal Degradation of Fire Retardant Formulations and Dispersion of Clay in Polymer/Clay Nanocomposites (opens in a new tab)

  17. Πειραματική μελέτη σύνθεσης μοριακά αποτυπωμένων πολυμερικών μικρο- και νανοσωματιδίων για την επιλεκτική αναγνώριση πεπτιδίων

    … studied and the effect of the various process parameters on the structure, morphology and porosity of the produced polymers was defined. The total solubility parameter and the solubility parameter components of the polymers were calculated either by group contribution methods or by topological …

    greece Repository record for Πειραματική μελέτη σύνθεσης μοριακά αποτυπωμένων πολυμερικών μικρο- και νανοσωματιδίων για την επιλεκτική αναγνώριση πεπτιδίων (opens in a new tab)

  18. Characterization and Asphaltene Precipitation Modeling of Native and Reacted Crude Oils

    … requires mole fractions, molar volumes, and solubility parameters for the pseudo-components representing the crude oil mixture. The pseudo-components used in the RSM, based on a solubility fractionation method (modified ASTM D4124 technique), are namely saturates, aromatics, resins, and …

    calgary Repository record for Characterization and Asphaltene Precipitation Modeling of Native and Reacted Crude Oils (opens in a new tab)

Page 1 of 5