Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Solvent retention"”.

  1. Solvent Retention Capacity and Quality Parameters of Whole Wheat Flour from Hard Red Spring Wheat

    A relatively new method, solvent retention capacity (SRC), is used to determine flour end-product quality. SRC was designed for soft wheat, which is used for baking cookies. The use of SRC to evaluate Hard Red Spring (HRS) wheat quality has not been conducted extensively. Eight HRS wheat cultivars …

    ndsu Repository record for Solvent Retention Capacity and Quality Parameters of Whole Wheat Flour from Hard Red Spring Wheat (opens in a new tab)

  2. The effect of solvents and processing conditions on the solvent extraction of coal.

    Solvent extraction of two bituminous coals to produce low-ash extract material was studied using solvents dimethylformamide (DMF), dimethylacetamide (DMAC) and N-methylpyrrolidone (NMP). The extraction efficiency was seen to be NMP>DMAC>DMF for the reflux extraction at the normal boiling point of …

    wvu Repository record for The effect of solvents and processing conditions on the solvent extraction of coal. (opens in a new tab)

  3. THE VAPOR-SOLVENT EFFECT ON INITIATED CHEMICAL VAPOR DEPOSITION (ICVD) POLYMERIC THIN FILMS

    Initiated Chemical Vapor Deposition (iCVD) is a solvent-free method that integrates polymerization and polymer processing into a single step to produce polymer thin films that are uniform and defect-free in benign synthesis conditions that retain functional moieties. Recently, the use of vapor …

    cornell Repository record for THE VAPOR-SOLVENT EFFECT ON INITIATED CHEMICAL VAPOR DEPOSITION (ICVD) POLYMERIC THIN FILMS (opens in a new tab)

  4. Evaluation of Stain Blocking Primer Coatings with Low Volatile Organic Compound (VOC) Content and Effects of Drying Conditions on the Properties of Water Reducible Coatings for Polypropylene

    … primers that are considered most effective are solvent based primers that contain VOC levels much higher than 100 g/L. The goal of this study is to determine if primers on the market today with a VOC content of 100 g/L or less can provide acceptable performance in comparison to primers with a …

    calpoly Repository record for Evaluation of Stain Blocking Primer Coatings with Low Volatile Organic Compound (VOC) Content and Effects of Drying Conditions on the Properties of Water Reducible Coatings for Polypropylene (opens in a new tab)

  5. Noble and transition metal aromatic frameworks: synthesis, properties, and stability

    … change in thermal stability, and increase their solvent retention from 16% to 25%. Zn is shown to couple with Cu in the same dimer at a high rate, changing the behavior of the dimer from anti-ferromagnetic to paramagnetic. The Weiss temperature suggests weak ferromagnetic interaction.

    gatech Repository record for Noble and transition metal aromatic frameworks: synthesis, properties, and stability (opens in a new tab)

  6. CONTROLLING PLASMONIC AND ORGANIC SEMICONDUCTOR PHOTORESPONSES THROUGH INTERFACIAL MODIFICATIONS

    … from to solution to the aerosol phase. Ligand-solvent interactions proved to play a key role in the degree of solvent retention and peak shifting in plasmonic aerosols, suggesting that particle functionalization and suspension solvent could be varied to modulate solvent shell thickness, …

    jhu Repository record for CONTROLLING PLASMONIC AND ORGANIC SEMICONDUCTOR PHOTORESPONSES THROUGH INTERFACIAL MODIFICATIONS (opens in a new tab) Embargoed until 2028-12-01

  7. Designing Electrolytes and Electrode-electrolyte Interfaces for Next-Generation Lithium Metal Batteries

    … is prepared by a solution casting method, lean solvent confinement affects the morphological structure and ionic conductivity of CPE. A higher amount of solvent retention leads to higher ionic conductivity but at the cost of membranes’ mechanical properties. In order to study anode-free Li-metal …

    calgary Repository record for Designing Electrolytes and Electrode-electrolyte Interfaces for Next-Generation Lithium Metal Batteries (opens in a new tab)

  8. A Numerical Simulation Study of the N-SolvTM Process

    … than Steam-Assisted Gravity Drainage (SAGD), solvent based recovery processes are a potential alternative. Vapor Extraction (VAPEX) and N-SolvTM are two potentially competing solvent recovery processes that offer water-free operation. Although VAPEX has demonstrated success in laboratory …

    calgary Repository record for A Numerical Simulation Study of the N-SolvTM Process (opens in a new tab)

  9. Μελέτη των φυσικοχημικών χαρακτηριστικών λεπτόκοκκων αλεσμάτων δημητριακών: εφαρμογή στην Τεχνολογία Τροφίμων με έμφαση σε προϊόντα διατροφής

    … and mechanical properties were studied. Solvent retention capacity tests were also performed. In general, particle size reduction was significant for the properties studied. Equally important was the feed rate of the mill. The botanical origin also affected the measurements. For example …

    greece Repository record for Μελέτη των φυσικοχημικών χαρακτηριστικών λεπτόκοκκων αλεσμάτων δημητριακών: εφαρμογή στην Τεχνολογία Τροφίμων με έμφαση σε προϊόντα διατροφής (opens in a new tab)

  10. Genome-wide association study and genomic prediction for end-use qualities in hard winter wheat

    … winter wheat. Lines were phenotyped using the solvent retention capacity test and genotyped via genotyping-by-sequencing. Forty-three marker-trait associations were identified across 17 chromosomes, especially on chromosome 1B, indicating polygenic influence. Co-localization between identified …

    colostate Repository record for Genome-wide association study and genomic prediction for end-use qualities in hard winter wheat (opens in a new tab)

  11. Vat Photopolymerization of High-Performance Materials through Investigation of Crosslinked Network Design and Light Scattering Modeling

    … backbone, potentially caused by lack of solvent retention limiting the imidization conversion. The tetra-acid exhibits a Tg of 260oC, while the half-ester displays a higher Tg of 380 oC caused by the degradation of the polymer backbone, forming residual char, restricting chain mobility. …

    vt Repository record for Vat Photopolymerization of High-Performance Materials through Investigation of Crosslinked Network Design and Light Scattering Modeling (opens in a new tab)

  12. Influence of tempering and steam explosion operations on the compositional and functional properties of intermediate wheatgrass (Thinopyrum intermedium)

    … bran achieved via tempering resulted in higher solvent retention capacity for lactic acid, an indicator that protein networks were better developed in tempered flours compared to control. This pronounced improvement in protein network formation prompted us to further evaluate the impact of …

    umn Repository record for Influence of tempering and steam explosion operations on the compositional and functional properties of intermediate wheatgrass (Thinopyrum intermedium) (opens in a new tab)

  13. Identification of anelastic and viscoelastic dissipation mechanisms in at-cut guartz resonators and thin polymer films with high frequency impedance spectroscopy and the differential evolution metaheuristic

    … the film/substrate interface stiffness of the solvent cast films was compromised due to the existence of solvent (chloroform) therein, solvent which was used during the coating process. The spin coated film was subjected to three subsequent temperature ramps. The observed frequency and …

    greece Repository record for Identification of anelastic and viscoelastic dissipation mechanisms in at-cut guartz resonators and thin polymer films with high frequency impedance spectroscopy and the differential evolution metaheuristic (opens in a new tab)