Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Soot loading"”.
-
Radio Frequency Studies of Soot Loading and Ammonia Storage on a Diesel Particulate Filter with a SCR Catalyst Coating
… a viable method for measurement of the amount of soot loaded onto DPF’s [1] and the amount of NH3 stored on SCR catalysts [2]. In one of the configurations, a microwave resonant cavity is formed by the metal can encasing the enclosed catalyst. Two metal probes acting as antennas are placed on …
-
Calibration and Validation of a 1D model for Exhaust Aftertreatment System in Heavy Duty Diesel Engines
… The model predicts temperature, pressure drop, soot loading and concentrations of NOx, CO and HC. The work includes tuning the reaction rate parameters such as activation energies and pre-exponent factors in the purpose of minimizing the difference between experimental and simulation results. …
-
Modeling of diesel particulate filter (DPF)
… in the exhaust system for purifying most of the soot particles harmful to humans and the environment. This project aims to study the effect of pressure drop on soot loading, where the pressure drop rises with the steadily increasing amount of soot. Therefore, the attempt to influence the pressure …
-
An experimental and numerical investigation on hydrogen-hydrocarbon composite fuel combustion.
… O radical concentrations, which increase CO and soot oxidation. Also, the increase in OH, H and O concentrations enhances the flame stability by increasing the laminar flame speed of the composite fuel. The visible flame length, radiative heat loss, and volumetric soot loading decrease with the …
-
Διερεύνηση εφαρμογής μεταλλικών αφρών σε διατάξεις μετεπεξεργασίας καυσαερίου κινητήρων diesel
… of coating characteristics (Pt and washcoat loading, pore size, coating method) on conversion efficiency. The experience from fundamental investigations was used to develop a number of prototype foam catalysts. The prototypes were experimentally evaluated on an engine bench to define the …
-
Development of an Accelerated Ash Loading Protocol for Rapid Evaluation of Diesel Particulate Filters Including Comprehensive Characterization of Ash-loaded Substrates
<p>The accelerated ash loading of diesel particulate filters (DPFs) by lube-oil derived products is investigated in the present study. A 517-cc single-cylinder, naturally aspirated direct-injection diesel engine is used to accelerate ash formation by artificially increasing the rate of lube-oil …
-
An experimental and computational investigation of microwave regeneration of diesel particulate traps.
… traps. Custom designed and fabricated soot filtration and off-line regeneration systems were used for conducting tests on METOS. Accurate diesel soot loading of the Corning EX80 ceramic trap was made possible with the development of an automated exhaust bypass system. In this study, …
-
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF A DIESEL AFTERTREATMENT SYSTEM
… a fundamental role in determining the optimal soot loading level to be reached before DPF regeneration, three different filter substrate materials (Silicon Carbide, Aluminum Titanate and Cordierite) were investigated in this work, considering different driving conditions, after-treatment …
-
The compatibility of semi-synthetic engine oil with conventional diesel and biodiesel fuels
… entrainment of exhaust gases; and the effects of soot loading. Results show fuel dilution has the greatest influence on oil performance. Effects are seen with an instant ‘dilution’ of properties, with the resultant blend performing as an amalgam of the fluids. This can be both positive and …
-
Experimental investigation of catalytic soot oxidation and pressure drop characteristics in wall-flow diesel particulate filters
… Fraction (VOF) of the particulate, the study of soot and exhaust flow maldistribution in the filter and the study of pressure drop parameters as the permeability of the ceramic wall and the permeability – density of the particulate layer. All these studies were based on specially designed …
-
Development of a Novel Sensor for Soot Deposition Measurement in a Diesel Particulate Filter Using Electrical Capacitance Tomography
… a novel approach of particulate material (soot) measurement in a Diesel particulate filter using Electrical Capacitance Tomography. Modern Diesel Engines are equipped with Diesel Particulate Filters (DPF), as well as on-board technologies to evaluate the status of DPF because complete …
-
Combined Empirical and 1D Modeling Approach for Exhaust Aftertreatment System for Heavy Duty Diesel Engines
… source of inaccuracy was the unknown initial soot loading of the DPF, causing errors in pressure drop simulation. Nevertheless, the models can give a good approximation to what happens in the DOC and DPF, especially when using PLM and NRTC cycles.
-
Investigations on soot and flow field characteristics of blended liquid and gaseous fuels in turbulent swirl-stabilized non-premixed flames
… devices produce emissions such as NOx, CO2 and soot. Among these, soot formation is a complex process and their characteristics have not been understood completely. Hence, it has been the subject of recent studies in an effort to reduce its footprint in atmospheric pollution. The current work …
-
Φαινόμενα μεταφοράς και χημικών αντιδράσεων σε παγίδες αιθάλης με καταλυτική επίστρωση
… efficiency and pressure drop behavior during the loading conditions. The new semi-empirical mathematical model of filtration efficiency simulation is presented for first time, and validated against various operating conditions. The presence of washcoat loading increases the filtration efficiency …
-
Influence of Soot on the Transport Mechanisms inside the Filter Wall of SCR-Coated Diesel Particulate Filters
The effect of soot on the catalytic properties of a diesel particulate filter coated with a catalyst for the selective catalytic reduction of NOx with ammonia (SDPF) was studied by means of model-gas experiments. After loading of the SDPF with model soot from 0 to 10 g l-1, the NH3 storage as well …
-
External irradiation effect on the growth and evolution of in-flame soot species
External irradiation-soot species interaction is a subject that is of great interest due to its existing and future use in research and industrial sectors. An assessment of the impact of broadband radiation on the evolution of soot species within a laminar ethylene-air flame is therefore performed …
-
Experimental Investigation on Different After-treatment Technologies for the Control of Pollutant Emissions from Automotive Diesel Engines.
… to provide fundamental information about the soot loading process inside the DPF, was adopted to load small lab-size SiC DPF samples; advanced electron microscopy provided highly detailed images of soot deposited onto channel walls. While morphology of deposited soot and its compressibility …
-
Effect of Hydrogen Blending in Industrial Flames
… the addition of toluene as a means of improving soot loading and resulting radiant heat transfer and visibility was quantified. In this instance, bluff-body burners were used to study the effects of toluene addition to hydrogen-enriched flames while also characterising the influence of …
-
Συνεισφορά των οξειδίων του αζώτου (NOx) στην αναγέννηση παγίδων αιθάλης κινητήρων diesel
… agent in the regeneration process of the soot accumulated in the particulate filter. The background of this work consists of three already existed computational tools (exhaust system heat transfer code, oxidation catalyst code and thermal regeneration particulate trap code), which are …
-
Development of a Machine Learning model to characterize the performance of a Selective Catalytic Reduction on Filter after-treatment system for a Heavy-Duty Diesel Engine
… part of the operations of both the DPF (passive soot oxidation) and the SCR (fast SCR reactions), therefore, there could be a struggle for NO2 consumption in both DPF and SCR activities of the SCRF, this could limit the performance in the path/operation that is not being favored in the struggle. …
Page 1 of 2