Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Sorbent materials"”.
-
An Extended Procedure for Evaluating Oil Sorbent Materials
Materials that float, absorb oil, reject water and promote easy handling provide one of the most favorable approaches to the problem of removing spilled oil from the surface of water. This investigation discusses the existent laboratory procedures of various researchers for sorbent comparison; it …
-
The disposal of spilled oils and sorbent materials
… used oils, crude oils, their associated sorbant materials and oil soaked debris. The impact of an oil spill on the environment has far reaching consequences. The management of oil should be given the highest priority. Many steps have been taken in the development of oil management and disposal …
-
Sorption of arsenic species using chitosan based biopolymer sorbent materials
… biopolymer sorbent materials. The chitosan prepolymer investigated had a low molecular weight (~ 50,000-190,000 gmol-1) and high molecular weight (~ 150,000-375,000 gmol-1) whereas glutaraldehyde was used as the cross linking agent for each biopolymer. Two …
-
DEVELOPMENT OF BIOPOLYMERS AND THEIR MODIFIED FORMS AS SUSTAINABLE SORBENT MATERIALS
… separation of biofuels and water, new materials and methods are required to reduce GHG emissions and to develop more sustainable industrial processing. The overall goal of this research focuses on the sorption properties of biopolymers and their modified forms as adsorbents for …
-
Synthesis and Characterization of Chitosan-Glutaraldehyde Sorbent Materials For the Removal of Arsenate
… monolayer sorption capacities Qm (mg/g) of the adsorbents are given in parentheses in the following order: CH-GL1:1(14.4) > CH-GL1:0.5(12.0) > CH-GL1:0.25(10.3) > CH-GL1:6(2.24). In general, the sorption capacities are listed in descending order as follow: un-buffered > buffered (pH 5.0) > …
-
Development of teawaste based bio-sorbent materials for removal of Cr(VI) from wastewater
… control. <br/><br/>In this research bio-sorbent materials for application in hexavalent chromium removal from waste water were produced and evaluated. The teawaste material was collected from local cafeteria. First, the teawaste material was mixed with bleach until the teawaste paste …
-
UNDERSTANDING THE SURFACE CHEMISTRY OF GAS PHASE ORGANOPHOSPHORUS CHEMICAL WARFARE AGENTS WITH SORBENT MATERIALS
… which hinders the search for improved filtration materials. To overcome this issue, studies are performed using relatively benign simulant compounds that have similar adsorption and decomposition properties as toxic CWAs. In this work, a report of experimental findings will be presented regarding …
-
Scanning electron microscopy and X-ray energy dispersive spectroscopic analysis of selected sorbent materials
… showed that a combination of acidic and basic sorbents in a layered system is required to reduce to safe levels the contaminants present in the leachates emanating from industrial landfills. The sorbents used were fly ash, vermiculite, kaolinite, illite, zeolite, apautagite, bentonite, …
-
Development of new methods for the extraction and passive recovery of organic and inorganic micropollutants using hybrid micro/nano-sorbent materials
… solvent consumption, supports a diverse range of sorbents, and provides a high surface area for efficient analyte interaction. FPSE is also stable across a broad pH spectrum, enhances analyte diffusion through magnetic stirring, facilitates rapid back-extraction with minimal solvent, reduces …
-
Functionalized Nano-structured Silicas for Trace Collection from Natural Waters
Throughout this body of work, three classes of sorbent materials were created and optimized, each designed to selectively capture organics or desired metals from natural water sources. These target species included toxic heavy metals, uranium, rare earths, and simple organics, such as benzene. Each …
-
Sorção de petróleo por fibras vegetais
… or detours are usually made of synthetic materials such as polyurethane foam. In order to clear water away, techniques like in loco burning, biodegradant agents, dispersant agents and sorbent materials application are used. The most of the sorbent materials are also synthetic and they are …
-
Enzymatic degradation of cotton used for spill absorption
… dispersants, booms, skimmers, and sorbent materials. Cellulose-based organic sorbent materials have the advantages of selective removal of oil over water, biodegradability, relatively low cost, and limited impact on the environment. Cotton and wool fibers could replace synthetic …
-
Σύνθεση και χαρακτηρισμός πορωδών υλικών για την εφαρμογή τους στην απομάκρυνση ρύπων από υδατικά διαλύματα
… carbons (CMK-3 and DMC), mesoporous silica materials type HMS and the modified derivatives with aminogroups or cyclodextrine (HMS-NH2, HMS-CD2%, HMS-CD4% and HMS-CD6%) and layered double hydroxide (Mg-Al and Mg-Fe calcined and non-calcined) were investigated for the sorption of Remazol Red …
-
Molecular imprinting of organofunctionalized sol-gel materials for metal ion separations
… synthesis and characterization of new metalion sorbent materials. These materials exhibit many favorable properties such as high metal ion capacities, metal ion selectivity, fest kinetics, and easy regeneration. Sorbents have been developed to selectively adsorb Cu(II),Zn(II),and Ni(II) …
-
Natural and Anthopogenic Carbonaceous Materials for the Remediation of Polychlorinated Biphenyls from Aqueous Solution
… health. The proliferation of carbon-based nanomaterials such as graphene (GE) and carbon nanotubes (CNT) has generated interest in their use as sorbent materials for the remediation of PCBs. In this study, isotherm experiments were conducted to compare the sorption of 11 PCB congeners to …
-
The effect of inorganic salts on adsorption of organics by fly ash
… fusion and low fusion fly ashes were used as sorbent materials. Removal of organic pollutants was measured using a total organic carbon analyzer.</p> <p>Isotherm tests positively indicate that the addition of inorganic salts to fly ash significantly increases adsorption capacity. The study …
-
A Survey of Metal, Cyanometallate, and Polyamine Building Blocks in the Synthesis of Amine-Containing Cyanometallate Coordination Polymer Sorbents for Direct Air Capture of CO2
… to remediate emitted CO2; however, current sorbent materials are costly and difficult to prepare on a large scale. Among these materials, amine-functionalised metal-organic frameworks that capture CO2 through a unique chemisorptive mechanism inspired the work presented herein. Attempts were …
Page 1 of 4