Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Spall strength"”.

  1. A Study of Particle Surface Effects on the Spall Strength of Particle-Reinforced Polymer Matrix Composites

    … are used to characterize the dynamic tensile strength (spall strength) of a material. In particular, prior work has observed that the presence of secondary phases influences the overall material, typically reducing spall strength. In the study presented here, surface effects were investigated …

    carleton Repository record for A Study of Particle Surface Effects on the Spall Strength of Particle-Reinforced Polymer Matrix Composites (opens in a new tab)

  2. Design of Materials Tolerant to Dynamic Tensile Spall Failure

    Materials tolerant to dynamic tensile or “spall” failure are of interest for applications involving high-velocity impact and blast loading. Metals and polymers generally have favorable responses to such extreme conditions and are therefore useful materials in shock- absorbing applications, such as …

    gatech Repository record for Design of Materials Tolerant to Dynamic Tensile Spall Failure (opens in a new tab)

  3. Effects of microstructure on the spall behavior of aluminum-magnesium alloys

    This research focuses on the spall properties of aluminum-magnesium (Al-Mg)alloys.Aluminum alloy 5083 (Al 5083) was used as a model alloy for the work performed in this study. Al-Mg alloys represent a light-weight and corrosion resistant alloy system often used in armor plating. It is desirable to …

    gatech Repository record for Effects of microstructure on the spall behavior of aluminum-magnesium alloys (opens in a new tab)

  4. An Experimental Investigation of Spall Fracture in Neat Epoxy and an Epoxy/Carbon Nanotube Composite

    The spall strength of a material can be used to parameterize its ability to resist tensile failure under high-strain-rate loading. Dynamic failure in an assortment of representative materials was studied. A focus was placed on characterizing the mechanical properties of a polymer-matrix composite. …

    carleton Repository record for An Experimental Investigation of Spall Fracture in Neat Epoxy and an Epoxy/Carbon Nanotube Composite (opens in a new tab)

  5. Fast rate fracture of aluminum using high intensity lasers

    … in aluminum play in dynamic yielding and spall fracture at tensile strain rates of ~3x106 s-1. Preliminary results and analysis indicated that material grain size plays a vital role in the fracture morphology and spall strength results. In a study with single crystal aluminum specimens, …

    texas Repository record for Fast rate fracture of aluminum using high intensity lasers (opens in a new tab)

  6. Dynamic deformation of titanium-based bulk metallic glass composites

    … response on the dynamic yielding and spall response through controlled plate impact experiments. The experiments consisted of simultaneous impact of two samples with one being probed using VISAR interferometry and the other being recovered for post-mortem fractography and …

    gatech Repository record for Dynamic deformation of titanium-based bulk metallic glass composites (opens in a new tab)

  7. 3D CHARACTERIZATION OF MICROSTRUCTURAL EFFECT ON SPALL VOID NUCLEATION IN POLYCRYSTALLINE MAGNESIUM

    … is a lightweight material with high specific strength, making it suitable for aerospace and automotive applications. This dissertation focuses on studying the behavior of magnesium under shock loading, with a focus on investigating the nucleation of spall voids in polycrystalline magnesium. We …

    jhu Repository record for 3D CHARACTERIZATION OF MICROSTRUCTURAL EFFECT ON SPALL VOID NUCLEATION IN POLYCRYSTALLINE MAGNESIUM (opens in a new tab) Embargoed until 2027-12-01

  8. The Effect of Temperature on the α to ε Phase Transition of a Low Carbon Steel

    … of preheating up to 200°C on the Hugoniot, spall strength, and phase transition of a low carbon steel. Shock-recovery experiments with momentum trapping rings were used to preserve samples for post-shot analysis including optical microscopy, microhardness, X-ray diffraction (XRD), and …

    marquette Repository record for The Effect of Temperature on the α to ε Phase Transition of a Low Carbon Steel (opens in a new tab)

  9. Dynamic behaviour of nano-sized voids in hexagonal close-packed materials

    … mechanisms observed, therefore, explain the low spall strength of Mg and suggest the possibility of manipulating some mechanisms to increase ductility and spall strength of new lightweight Mg alloys.

    ubc Repository record for Dynamic behaviour of nano-sized voids in hexagonal close-packed materials (opens in a new tab) Download PDF for Dynamic behaviour of nano-sized voids in hexagonal close-packed materials (opens in a new tab)

  10. Experimental Characterization of the Effect of Microstructure on the Dynamic Behavior of SiC

    … ceramics have extremely high compressive strengths and low densities. One ceramic that has been shown to be highly resistant under ballistic impact is silicon carbide (SiC). It has been found that even within the silicon carbides, those manufactured by certain methods and those with …

    gatech Repository record for Experimental Characterization of the Effect of Microstructure on the Dynamic Behavior of SiC (opens in a new tab)

  11. Determination of dynamic response of ceramics and ceramic-metals under shock compression and spall

    … (HEL) of GC-915 was found to be 0.935 GPa and spall strength of approximately 2 GPa was also measured.

    nps Repository record for Determination of dynamic response of ceramics and ceramic-metals under shock compression and spall (opens in a new tab)

  12. MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF STRUCTURAL METALS

    … enhanced ductility and higher ultimate tensile strengths, as compared to 4A. Additionally, the impact of grain size on quasi-static and spall strengths of Mg-1Zn-0.2Ca was explored. Samples were processed to generate 3 target grain sizes: ~8, ~26, and ~57 μm. Grain size impacted quasi-static …

    jhu Repository record for MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF STRUCTURAL METALS (opens in a new tab)

  13. On the shock response of single crystal tin

    … observed, with no measurable differences. The spall behaviour also shows no anisotropy. Instead, the strain rate is the primary governing factor of spall strength, and suggests that the spall failure is more similar to a viscous flow than brittle failure, the latter being common in many other …

    oxford Repository record for On the shock response of single crystal tin (opens in a new tab)

  14. A Study of the Effect of Halloysite-Reinforcement on the Dynamic Behaviour of Polyurethane

    … micro-domain morphological architecture. Gas-gun spall testing results showed an increase of 35% in spall strength and 21% fracture toughness for the nanocomposite. Subsequent characterization results show present the influence of the HNTs to alter the resultant hard domain spherulitic structure, …

    carleton Repository record for A Study of the Effect of Halloysite-Reinforcement on the Dynamic Behaviour of Polyurethane (opens in a new tab)

  15. Multiscale Mechanics of Failure in Extreme Environments

    … the bulk modulus, shear stresses near the ideal strength, temperatures approaching melting, and timescales ranging from nanoseconds to the age of our Solar System (~5 billion years). We focus on materials in two particular extreme environments in this thesis. First and foremost, we explore the …

    jhu Repository record for Multiscale Mechanics of Failure in Extreme Environments (opens in a new tab)

  16. Microstructural Evolution of Lean Duplex Stainless Steels under Different Loading Conditions

    … properties (high yield stress, ultimate tensile strength, and ductility), and corrosion properties make them suitable for many applications, such as offshore platforms and in the nuclear industry. Engineering components in such applications are likely to be subjected to different stress states …

    unsw Repository record for Microstructural Evolution of Lean Duplex Stainless Steels under Different Loading Conditions (opens in a new tab)

  17. Additive Manufactured Ti-Ni-C Metal Matrix Composites for Ballistic Applications

    … amount of NCG in SCM resulted in the increase of strength and the reduction of ductility. The strain rate effect was negligible when the strain rate was lower than 10-1 s-1. However, SCM with higher NCG content exhibited decreased strain rate hardening effect and better resistance to shear …

    unsw Repository record for Additive Manufactured Ti-Ni-C Metal Matrix Composites for Ballistic Applications (opens in a new tab)

  18. Shock-Induced Failure of Protection Materials using Laser-Driven Micro-Flyers

    … We use the LDMFP facility to drive incipient spall failure in AZ31B foils. In spall, shockwave interactions from the impact loading generate high tensile stresses within the target specimen, leading to failure through void growth, coalescence and fracture. Our experiments show an increase in …

    jhu Repository record for Shock-Induced Failure of Protection Materials using Laser-Driven Micro-Flyers (opens in a new tab)

  19. A DATA-DRIVEN APPROACH FOR MICROSTRUCTURAL INVERSE DESIGN THROUGH MATERIALS INFORMATICS

    … methods to speed up the design of high-strength alloys for consumer products. Tesla and SpaceX have similarly invested in computational tools to facilitate development and production of innovative materials for components of electric vehicles and spacecraft. Traditionally, material …

    jhu Repository record for A DATA-DRIVEN APPROACH FOR MICROSTRUCTURAL INVERSE DESIGN THROUGH MATERIALS INFORMATICS (opens in a new tab)

Page 1 of 2