Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Spatial Hole Burning"”.
-
Temperature and Spatial Hole Burning Effects in Semiconductor Lasers and Integrated Optical Devices
The effects of temperature and spatial hole burning are investigated in long-wavelength InP-based lasers and integrated optical devices, including Fabry-Perot (FP) lasers, distributed-feedback (DFB) lasers, and integrated electroabsorption modulator with DFB lasers (EML). First, the temperature …
-
Novel Microlaser by Quantum Inspired Engineering
… architectures, such as the elimination of spatial hole burning (SHB) effect in conventional microring laser, the generation of lasing beam carrying orbital angular momentum (OAM) information, and robust single mode lasing in the desired state, even with intentionally introduced …
-
ANALYSIS OF MODAL CHARACTERISTICS OF THIN SUBSTRATE LASERS
… contact structures which at and below the value, spatial hole burning does not occur. Near the critical contact width of approximately 8µm, the lateral mode has FWHM almost constant with pumping and is stable to very high pumping current. Below the critical value, though the near-field is also …
-
Epitaxial and cavity design optimisation for the next generation of InP semiconductor laser devices
… density distribution to reduce the effect of spatial hole burning, and this resulted in a lower linewidth at higher powers where spatial hole burning is an issue. Using these designs, devices can be fabricated where narrow linewidth at high powers is a requirement.<br/><br/><i>Thesis is …
-
Modelling the Spectra of Distributed Feedback Lasers
… regime, and is used to predict correctly spatial hole burning phenomena in DFB laser spectra.</p>
-
Tunable mid-infrared light sources based on intersubband transitions
… of bidirectional lasers and do not suffer from spatial hole burning. In this work, this operation was realised by incorporating an "S"-crossover waveguide into the ring cavity in a manner that it introduces non reciprocal loss and gain in the counter-clockwise (CCW) and clockwise (CW) directions …
-
IMPACT OF GRATING DUTY-CYCLE RANDOMNESS ON DFB LASER PERFORMANCE
… Bragg stopband width. However, the longitudinal spatial hole burning (LSHB) effect in the DFB lasers can somewhat be diminished by the grating DCR. The seriousness of these effects depends on different grating structures and their coupling strengths. Our simulation shows that a degradation of …
-
External Cavity Quantum Cascade Lasers
… improved performance due to the suppression of spatial hole burning (SHB), an instability common to linear laser resonators. An active modulation scheme based on a number of bespoke power amplifiers and bias-tees is developed. These systems are used to produce mode-locked pulse trains in …
-
QUANTUM THEORY OF MULTIWAVE MIXING (RESONANCE FLUORESCENCE, SATURATION SPECTROSCOPY, MODULATION, PHASE CONJUGATION, QUANTUM NOISE).
… include the effects of inhomogeneous broadening, spatial hole burning, and Gaussian transverse variations. The resonance fluorescence spectrum in a high finesse optical cavity is analyzed in detail, demonstrating how stimulated emission and multiwave processes alter the spectrum from the usual …
-
Fully coupled electrical and optical simulation of vertical cavity surface emitting lasers
… optical coupling strengths between electrons and holes in various subbands. It is shown that inclusion of an accurate bandstructure is important for obtaining correct laser output characteristics such as the modulation response. Finally, a fast new Green's function based optical solver (VMS) has …
-
DEVELOPMENT OF PERIODIC GRATINGS FOR APPLICATIONS IN DISTRIBUTED FEEDBACK LASERS
… non uniform gratings can help to eliminate the spatial hole burning that affects DFB lasers with uniform gratings. This is a result of the more uniform intensity distributions that are seen in the non-uniform gratings. The most promising structure is that of the three-phase-shift DFB laser which …
-
Semiconductor Corrugated Ridge Waveguide Distributed Feedback Lasers: Experimental Characterization and Design Considerations
… were analyzed, where the degree of longitudinal spatial hole burning (LSHB) can be effectively reduced by means of fine tuning of the grating duty cycle. Additionally, we showed how the side-mode suppression ratio can be predicted depending on the device geometry.
-
Photosensitivity and Photodarkening of UV-induced Phosphate Glass Fiber Bragg Gratings and Application in Short Fiber Lasers
… demonstrated. By exploiting the polarization hole burning effect and the spatial hole burning effect, stable narrow-linewidth dual-wavelength lasing emission with 38 pm wavelength spacing and a total emitted power of 2.8 mW is obtained from the DBR fiber laser.
-
Study of Temperature Characteristics of 1.3μm Strain-Layer Multiple Quantum Well Lasers
… distribution with temperature is the result of spatial hole-burning.</p> <p>The final part of this thesis presents a technique to determine the temperature rise of the lasers during CW operation, which was then used to calculate the thermal impedances of different ridge width lasers. It was …
-
Spectroscopy inside the cavity of a two mode laser
… that includes effects of mode coupling by spatial hole burning, optical injection as well as additional intracavity absorption losses on one of the two modes. The sensitivity and spectral characteristics of the new measurement technique were demonstrated experimentally by measuring an …
-
Design, Modeling, and Simulation of Directly Frequency- and Intensity-Modulated Semiconductor DFB Lasers
… relaxation oscillation peak through longitudinal spatial hole burning (LSHB) effect. Optimization of the phase-shift position to be 25% (in terms of the total length of the cavity) away from the high reflective (HR)-coated facet leads to reduced power leakage thus a higher quality factor of the …
-
SIMULATION OF DISTORTION IN DIRECTLY MODULATED SEMICONDUCTOR LASERS
… (iv) non.linear gain effects and, (v) spatial hole burning. Only the first three are considered in this thesis. The first source of distortion can be avoided or at least reduced by careful design of the laser. The second source of distortion due to relaxation resonance is important only …
-
Design, Fabrication, and Characterization of Advanced High-power Single-mode 9xxnm Semiconductor Lasers
… model, which accounts for Longitudinal Spatial Hole Burning (LSHB) and Two-Photon Absorption (TPA) effects, facilitating a thorough exploration of how design parameters influence output power and conversion efficiency. This approach offers an effective and time-efficient epitaxial …
-
Contrôle des propriétés d'émission des lasers à l'aide de couches minces nanostructurées
… pour osciller à leur tour : c'est le creusement spatial dans la distribution de gain du milieu amplificateur qui est une traduction littérale de l'expression anglaise "spatial hole burning". Notre idée dans ce travail consiste justement à favoriser l'émission monomode longitudinal en …
Page 1 of 2