Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Spheronisation"”.

  1. Modified starch as an excipient for pellets prepared by means of extrusion/spheronisation

    De focus van dit onderzoeksproject zijn pellets als farmaceutische doseringsvorm. Pellets worden gedefiniëerd als sferische partikels met goede vloei-eigenschappen en met een nauwe deeltjesgroottedistributie (voor farmaceutische toepassingen variërend tussen 500 en 1500 μm). Als multiparticulaire …

    ghent Repository record for Modified starch as an excipient for pellets prepared by means of extrusion/spheronisation (opens in a new tab)

  2. Small scale manufacturing and scintigraphic detection of pellet formulations

    … which were manufactured using either extrusion-spheronisation or the drug-layering techniques. Pelletisation methods were developed on a small scale in order to minimise quantities of radioisotope required for manufacturing for scintigraphic studies.Extrusion-spheronisation used microcrystalline …

    strathclyde Repository record for Small scale manufacturing and scintigraphic detection of pellet formulations (opens in a new tab)

  3. Use of Aloe vera and Aloe marlothii materials as excipients in beads produced by extrusion–spheronization

    … of spherical particles or beads by extrusion spheronisation. However, the use of MCC in beads has its limitations such as prolonged release of drugs due to lack of disintegration. The aim of this study was to determine if Aloe vera and Aloe marlothii leaf materials can be used as excipients in …

    nwu-za Repository record for Use of Aloe vera and Aloe marlothii materials as excipients in beads produced by extrusion–spheronization (opens in a new tab)

  4. The design and characterisation of multiparticulate lipidic systems for oral drug delivery

    … matrix drug delivery system utilising extrusion spheronisation. The initial formulation supplied was Sebomin® MR 100mg capsules, an oral modified release commercial product. A technological transfer was undertaken to reproduce the Sebomin® multiparticulate product utilising lab-scale …

    strathclyde Repository record for The design and characterisation of multiparticulate lipidic systems for oral drug delivery (opens in a new tab)

  5. Investigations of the physicochemical properties of waxes and wax matrix pellet formulations

    … of wax matrix pellet systems using a direct warm spheronisation method for use as sustained release devices in oral drug delivery. The effect of altering process parameters on resultant pellet morphology, size distribution and in vitro dissolution performance was evaluated. Changes in the …

    strathclyde Repository record for Investigations of the physicochemical properties of waxes and wax matrix pellet formulations (opens in a new tab)

  6. Development of a double phase dosage form for enhanced peptide drug delivery

    … beads were prepared by means of extrusion spheronisation containing insulin as active ingredient and chitosan as muco-adhesive agent. Four other bead formulations were prepared by means of extrusion spheronisation, each containing a different drug absorption enhancing agent, which included …

    nwu-za Repository record for Development of a double phase dosage form for enhanced peptide drug delivery (opens in a new tab)

  7. DEVELOPMENT OF AN ORAL MULTIPLE-UNIT DOSAGE FORM CONTAINING A HIGH LOAD OF 5-AMINOSALICYLIC ACID

    … loading and density) advantages [2]. Extrusion-spheronisation (E-S) was investigated as the manufacturing technique, as it offers the potential to produce highly-loaded pellets [3]. Experimental A ram extruder apparatus (capillary rheometer) was initially employed to investigate, systematically, …

    milano Repository record for DEVELOPMENT OF AN ORAL MULTIPLE-UNIT DOSAGE FORM CONTAINING A HIGH LOAD OF 5-AMINOSALICYLIC ACID (opens in a new tab)

  8. Cassava starch as modified release excipient in selected gliclazide oral dosage forms

    … researched since the 1950s known as extrusion-spheronisation. Starches and starch based products have been utilised for many years as multifunctional excipients in the production of solid oral dosage forms. For instance, starches have been used as fillers, binders and disintegrants. The polymer …

    nwu-za Repository record for Cassava starch as modified release excipient in selected gliclazide oral dosage forms (opens in a new tab)

  9. Developing a compact dosage system for the management of helicobacter pylori peptic ulcers

    … of supercritical carbon dioxide and extrusion-spheronisation formulation techniques to create a single-unit solid oral dosage system with improved solubility using various optimization strategies. It utilized DSC, FTIR, XRD, and dissolution techniques to conduct baseline studies on commercially …

    kent Download PDF for Developing a compact dosage system for the management of helicobacter pylori peptic ulcers (opens in a new tab)

  10. Enhancement of niacin availability in the ileocolonic region by microencapsulation and coating

    … a two-step process (extrusion with subsequent spheronisation). The latter method achieved a higher particle yield and required a lower use of shellac in relation to the mass of active substance. As an alternative to shellac coated microcapsules, the incorporation of niacin into pectin-zein …

    cau-kiel Repository record for Enhancement of niacin availability in the ileocolonic region by microencapsulation and coating (opens in a new tab)

  11. Preparation and evaluation of multiple-unit solid oral dosage forms containing chemical permeation enhancing agents

    … vera gel materials) were produced by extrusion-spheronisation, using a full factorial design to optimise the formulations based on transepithelial electrical resistance (TEER) reduction of Caco-2 cell monolayers as response. The optimum bead formulations were evaluated in terms of friability, …

    nwu-za Repository record for Preparation and evaluation of multiple-unit solid oral dosage forms containing chemical permeation enhancing agents (opens in a new tab)

  12. Development of vitamin C and E fixed-dose combination, multiple-unit, solid oral delivery systems

    … excipients were produced by means of extrusion spheronisation. The beads were characterised in terms of uniformity of mass, friability, assay and bead size distribution. Drug release studies were performed by means of dissolution tests. Ex vivo transport studies were done using a Sweetana-Grass …

    nwu-za Repository record for Development of vitamin C and E fixed-dose combination, multiple-unit, solid oral delivery systems (opens in a new tab)

  13. Improvement of the pharmaceutical availability and membrane permeability of furosemide by formulation design

    … mm, 0.75 mm and 1 mm) were produced by extrusion-spheronisation consisting of different combinations of excipients, which were compressed to form flat faced, bevelled edge MUPS tablets. Three control MUPS tablet formulations (i.e. containing 0.5 mm, 0.75mm and 1 mm beads) were prepared without the …

    nwu-za Repository record for Improvement of the pharmaceutical availability and membrane permeability of furosemide by formulation design (opens in a new tab)

  14. Development of micro-beads that contain functional excipients for effective oral delivery of macromolecular drugs

    … micro-beads were prepared by means of extrusion spheronisation, with each formulation containing fluorescein isothiocyanate (FITC)-dextran (FD-4) as model compound and a different absorption enhancer (i.e. Aloe vera gel, Aloe vera whole leaf extract, chitosan, TMC and sodium glycocholate …

    nwu-za Repository record for Development of micro-beads that contain functional excipients for effective oral delivery of macromolecular drugs (opens in a new tab)

  15. Development of a compressed bead-in-capsule drug delivery system for sustained release

    … bead formulations were prepared by extrusion-spheronisation containing different selected fillers (i.e. Avicel® PH 101, MicroceLac® 100; RetaLac®) and active ingredients (i.e. furosemide and pyridoxine) using a full factorial design. A portion of each formulation of beads was coated using a …

    nwu-za Repository record for Development of a compressed bead-in-capsule drug delivery system for sustained release (opens in a new tab)

  16. In vitro evaluation of the enzyme inhibition and membrane permeation properties of benzophenones extracted from honeybush

    … which were prepared by means of extrusion spheronisation. The tablets were evaluated in terms of buoyancy, disintegration, friability, hardness and dissolution. Samples obtained from the transport and dissolution experiments were analysed by means of ultra-high performance liquid …

    nwu-za Repository record for In vitro evaluation of the enzyme inhibition and membrane permeation properties of benzophenones extracted from honeybush (opens in a new tab)

  17. Development of multiple-unit pellet systems by employing the SeDeM expert diagram system

    … congealing, compression, balling and extrusion-spheronisation. The pellets are then compressed into tablets (MUPS tablets) or filled into capsules (MUPS capsules) using the same principles and equipment that are used in the manufacturing of conventional tablets and capsules. The technology used …

    nwu-za Repository record for Development of multiple-unit pellet systems by employing the SeDeM expert diagram system (opens in a new tab)

  18. Development of a multiple-unit sustained release dosage form containing gliclazide

    … subsequently manufactured by means of extrusion-spheronisation utilising selected fillers and 10% w/w gliclazide. These combinations were studied using a full factorial design to identify the optimal concentration of lubricant (magnesium stearate) and binder (Kollidon® 90F) to be included in the …

    nwu-za Repository record for Development of a multiple-unit sustained release dosage form containing gliclazide (opens in a new tab)

  19. Development of a bead-in-matrix delivery system for insulin

    The oral route remains the most convenient and popular route for drug administration. However, for therapeutic peptide drugs, parenteral administration remains the most used route of administration as the use of the oral route for protein and peptide drugs being hindered by pre-systemic enzymatic …

    nwu-za Repository record for Development of a bead-in-matrix delivery system for insulin (opens in a new tab)

Page 1 of 2