Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Spin casting"”.

  1. Dynamics and phase separation during spin casting of polymer films

    Spin coating is process often used to make thin films. A substrate covered with a polymer solution is rotated rapidly. The solution spreads due to the centrifugal force and a film is obtained once the solvent has evaporated. In organic devices, films are often deposited via spin coating. The …

    whiterose Download PDF for Dynamics and phase separation during spin casting of polymer films (opens in a new tab)

  2. Optimization of material composition and processing parameters for hybrid organic-inorganic solar cells

    … annealing temperature, and the rates of spin casting and evaporative coating. We also find that the optimal weight ratio for the active layer of a ZnO:P3HT solar cell is 40 wt. % ZnO.

    texas Repository record for Optimization of material composition and processing parameters for hybrid organic-inorganic solar cells (opens in a new tab)

  3. Toward the fabrication and testing of all-polymer micronozzle

    … SU-8) were fabricated using different steps of spin casting and one step of photolithography. Microfluidic devices consisting of one input channel and one output channel each with a 500µm diameter, and connected with a channel 100µm in width, were fabricated using the PDMS polydimethylsiloxane …

    ubc Repository record for Toward the fabrication and testing of all-polymer micronozzle (opens in a new tab) Download PDF for Toward the fabrication and testing of all-polymer micronozzle (opens in a new tab)

  4. Photo-induced reversible changes in wettability on light sensitive pyrimidine-coated surfaces

    … when irradiated with UV light at 280 and 240nm. Spin-casting and chemisorption techniques were used to prepare the thin films which were characterised using a combination of static and dynamic wetting tests, UV-visible absorbance spectrophotometry, X-ray photoelectron spectroscopy (XPS), …

    adelaide Repository record for Photo-induced reversible changes in wettability on light sensitive pyrimidine-coated surfaces (opens in a new tab)

  5. Active Surface Topographies in Constrained Hydrogel Films for Biomedical Applications

    … deswell as a function of temperature. As such, spin-cast thin films of this polymer provide for topographies that have been used to investigate how highly metastatic lung cancer cells are able to rearrange their structure, specifically the cytoskeleton. Changes in cell to surface anchorage as a …

    usf Repository record for Active Surface Topographies in Constrained Hydrogel Films for Biomedical Applications (opens in a new tab)

  6. Perovskite by bar coating.

    In this work a step away from spin coating deposition was taken in order to make a more realistic approach with a view towards future of production of perovskite large scale. Instead of traditional spin casting, a bar coating deposition was used. This method provides a simple way to spread large …

    whiterose Download PDF for Perovskite by bar coating. (opens in a new tab)

  7. Sol-gel processing, perovskite phase development and properties of relaxor-based thin layer ferroelectrics

    … methods were used to prepare thin layers by spin-casting partially hydrolysed alkoxide-based solutions on platinized Si substrates. As-deposited layers were amorphous, and formed a nonferroelectric pyrochlore phase or a ferroelectric perovskite phase, depending on the processing route. Since …

    uiuc Repository record for Sol-gel processing, perovskite phase development and properties of relaxor-based thin layer ferroelectrics (opens in a new tab)

  8. Inkjet Printing of Conjugated Polymer: Fullerene Solar Cell Films

    … here approach those made using conventional spin-casting from chlorinated aromatics. The strategies should also be applicable to other forms of printing.

    nus Repository record for Inkjet Printing of Conjugated Polymer: Fullerene Solar Cell Films (opens in a new tab) Download file for Inkjet Printing of Conjugated Polymer: Fullerene Solar Cell Films (opens in a new tab)

  9. Characterization and application of Pb-based organometal halide perovskite

    … The morphology investigation shows that solution spin-casting method produces needle-shaped crystals, leading to a partial surface coverage and limited conductivity. The two-step from solution method was based on spin-casting PbI2 and CH3NH3I solution gradually, creating the perovskite upon …

    cagliari Repository record for Characterization and application of Pb-based organometal halide perovskite (opens in a new tab)

  10. Thulium Doped Microsphere Laser and Fiber Laser

    … tellurite glass microspheres are fabricated by spin casting technique. Single mode 2-mm laser is demonstrated from tellurite microsphere with high thulium doping concentration. General laser condition for self-terminating transition is discussed and concluded. Demonstration of 1.5-mm laser is …

    arizona-thes Repository record for Thulium Doped Microsphere Laser and Fiber Laser (opens in a new tab)

  11. Ionic liquid based polymer gel electrolytes

    … prepare a smooth and uniform layer of ion gel by spin casting. Typical thicknesses of spin-coated ion gels were 1~20 m. Alternatively, transfer printing using an elastomeric stamp was utilized to prepare all-printed (semiconductor, ion gel dielectric, and gate electrode) thin-film transistors. …

    umn Repository record for Ionic liquid based polymer gel electrolytes (opens in a new tab)

  12. Gallium-based Ultraviolet Nanoplasmonics

    … with spatial and ellipsometric measurements. Spin-casting a thin film of crystal violet upon these nanoparticles permitted the demonstration of surface-enhanced Raman spectra, fluorescence, and molecular photodegradation following excitation by a HeCd laser operating at 325 nm (UV). Measured …

    duke Repository record for Gallium-based Ultraviolet Nanoplasmonics (opens in a new tab)

  13. Bio-polymeric materials for electrical insulation applications.

    … These samples are thin films, prepared from spin-casting process. Electrical properties such as complex dielectric constant, volume resistivity and AC electrical breakdown strength of these samples are measured, while thermal and mechanical properties are summarized from literature. Using …

    manitoba Repository record for Bio-polymeric materials for electrical insulation applications. (opens in a new tab)

  14. BIOLOGICAL ACTIVITY OF FIBRONECTIN AT THE CELL-MATERIAL INTERFACE

    … en la escala nanométrica, obtenidas mediante el spin casting de soluciones de ácido poli(L-láctico)/poliestireno (PLLA/PS) de distintas concentraciones. La migración del PLLA hacia la superficie del film durante el proceso de spin coating proporciona superficies de PLLA con nanopicos de …

    upv Repository record for BIOLOGICAL ACTIVITY OF FIBRONECTIN AT THE CELL-MATERIAL INTERFACE (opens in a new tab)

  15. Synthesis and characterization of III-V semiconductor nanowires and fabrication of colloidal nanorod solar cells

    … of CdTe and CdSe nanorods by sequential spin casting onto ITO coated glass substrates. A broad range of factors impacting the success of the solar cell fabrication were explored; including the method of nanorod synthesis, choice of capping ligand, method of active layer application, and …

    texas Repository record for Synthesis and characterization of III-V semiconductor nanowires and fabrication of colloidal nanorod solar cells (opens in a new tab)

  16. Flexural behaviour of spun-cast concrete-filled fibre reinforced polymer tubes for pole applications

    In this study, the feasibility of utilizing the spin casting technique with structural Fibre-Reinforced Polymer (FRP) tubes and eliminating steel reinforcement is explored for the first time. This would make spun-cast FRP tubes (SCFTs) desirable in pole applications, as they are relatively …

    queens Repository record for Flexural behaviour of spun-cast concrete-filled fibre reinforced polymer tubes for pole applications (opens in a new tab)

  17. Tuning Degradation and Cell Adhesion in Next Generation Resorbable Implants

    … ranging from 50nm to 200nm were prepared by spin casting and were either isothermal annealed to obtain crystallization or thermally erased to remove sample history. To test for degradation, films were immersed in simulated body fluid at 37°C and their dry mass was measured weekly. The glass …

    usf Repository record for Tuning Degradation and Cell Adhesion in Next Generation Resorbable Implants (opens in a new tab)

  18. Broad-Band Sensitised Upconverters for a Crystalline Silicon Solar Cell

    … on a bifacial crystalline silicon solar cell by spin-casting, resulting in higher absorption, brighter upconversion luminescence and high photoconversion efficiency. The highest external quantum efficiency measured was 0.125% under a laser excitation at 1525 nm and 0.071 W/cm2. With the …

    unsw Repository record for Broad-Band Sensitised Upconverters for a Crystalline Silicon Solar Cell (opens in a new tab)

  19. Nanoporous and nanostructured materials for energy storage and sensor applications

    … spheres in a carbon matrix were obtained by spin-casting the LFP-carbon precursor on a quartz substrate and then pyrolyzing it. The product showed high capacity and could be charged /discharged with very little capacity fading over many cycles. Three-dimensionally ordered mesoporous carbons …

    umn Repository record for Nanoporous and nanostructured materials for energy storage and sensor applications (opens in a new tab)

  20. Synthesis and Characterization of Piezo-Magneto (PVDF-Fe3O4) Composites

    … The testing samples are produced using a spin casting process. The characterizations of the samples were performed using X-ray diffraction, Atomic force microscopy, linear staging, Dynamic mechanical analysis, Differential scanning calorimetry, and Fourier transform Infra-Red. X-ray …

    tamu Repository record for Synthesis and Characterization of Piezo-Magneto (PVDF-Fe3O4) Composites (opens in a new tab)

Page 1 of 2