Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 174 for “"Split Hopkinson"”.
-
Advancements in the Split Hopkinson Bar Test
The split Hopkinson bar test is the most commonly used method for determining material properties at high rates of strain. The theory governing the specifics of Hopkinson bar testing has been around for decades. It has only been the last decade or so, however, that significant data processing …
-
Split Hopkinson bar method of rock testing, The
Includes bibliographical references.
-
Dynamic properties of wood using the Split-Hopkinson Pressure Bar
… affects the strength of a material. The Split-Hopkinson Pressure Bar (SHPB) was initially used to study the effects of high strain rate (~103 1/s) testing of metals. Later modifications to the original technique allowed for the study of brittle materials such as ceramics, concrete, and …
-
Construction, calibration and application of a split Hopkinson pressure bar
Thesis (M.S.)--Michigan State University, Department of Mechanical Engineering, 2003
-
An Optical Method of Strain Measurement in the Split Hopkinson Pressure Bar
The split Hopkinson pressure bar (SHPB) continues to be one of the most common methods of testing materials at medium rates of strain. Elevated rates of strain, such as those found in impact and explosive applications, have been shown to induce phenomena such as strain hardening and phase …
-
Assessing the effect of friction on compression split Hopkinson pressure bar tests
… on accurate high strain rate material data. A Split Hopkinson Pressure Bar (SHPB) facility had previously been developed at the University of Cape Town to allow high strain rate testing of materials in compression. However, uncertainties regarding aspects of the test method that can affect the …
-
EXPERIMENTAL AND NUMERICAL SIMULATION OF SPLIT HOPKINSON PRESSURE BAR TEST ON BOROSILICATE GLASS
… impact could be tested through controlled impact Split Hopkinson Pressure bar (SHPB) testing setup. This paper discusses the results of SHPB bar testing on 1018 cold rolled steel to validate the experimental procedures and result analysis. The work has been extended to conduct testing on …
-
Novel experimental split-Hopkinson techniques for characterising strain rate effects and thermomechanical behaviour
This thesis presents novel split Hopkinson experimental techniques developed to accurately characterise materials under high strain rate deformation, focusing particularly on thermomechanical effects. Conventional split Hopkinson methods have limitations when testing certain challenging materials …
-
Development of Split-Hopkinson pressure bar apparatus for dynamic testing of nonlinear elastic metamaterials
… the design, development, and qualification of a split-Hopkinson pressure bar (SHPB) apparatus at the Applied Research Laboratories at the University of Texas at Austin (ARL:UT) with the intent of physically testing nonlinear elastic metamaterials—artificially-developed media that can manipulate …
-
Design of a Split Hopkinson Bar Apparatus for use with Fiber Reinforced Composite Materials
… the dynamic response of materials is the Split Hopkinson bar. The main focus of this work was to design a Split Hopkinson Bar apparatus to determine the dynamic compressive behavior of fiber reinforced composite materials. Graphite epoxy laminated composites have compressive failure …
-
Adiabaticity of high strain rate compression testing using the Split Hopkinson Pressure Bar Apparatus
In the development of explosively formed projectiles (EFPs), researchers are faced with the problem of testing prospective metals at high strain rates. So far it has been assumed that, relative to the cooling time, the deformation time is practically instantaneous indicating that the test is …
-
Study of shear localization using a novel test specimen loaded an a split-Hopkinson compression bar
… and (4) profuse twinning. In this research, a split-Hopkinson compression bar was used to study the effects of high strain rate loading and large plastic in three novel "shear" specimens. Each specimen had a unique geometry producing various degrees of shear deformation when dynamically loaded. …
-
Preliminary Investigation of Ultra-High Performance Concrete Behavior at High Strain Rates using the Split-Hopkinson Pressure Bar
… strength concrete (NSC). In past research, Split-Hopkinson pressure bar (SHPB) tests have been used for normal strength concrete to determine material behavior at high strain rates. The behavior of advanced concrete materials, such as UHPC, under high strain rates has not been thoroughly …
-
High-Strain Rate Tensile Characterization Of Graphite Platelet Reinforced Vinyl Ester Based Nanocomposites Using Split-Hopkinson Pressure Bar
… tests are performed applying the reverse impact Split Hopkinson Pressure Bar (SHPB) technique. The specimen geometry for tensile test is parametrically optimized by Finite Element Analysis (FEA) using ANSYS Mechanical APDL®. Uniform stress distribution within the specimen gage length has been …
-
Numerical and experimental studies on the use of a Split Hopkinson Pressure Bar for high strain rate tension testing
The Split Hopkinson Pressure Bar (SHPB) technique is widely used to dynamically characterize metals and is increasingly being used to characterize non-metallic materials such as fiber reinforced polymeric composite materials. However, the tensile version of the SHPB apparatus requires specimen …
-
Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling
… consisting of uniaxial compressive tests and Split Hopkinson Pressure bar tests were performed to cover low and high strain rates. The method’s ability to use low strain rate data to predict high strain rate behavior using the Johnson-Cook material model was evaluated. Numerical modeling and …
-
Experimental determination of material properties for materials subjected to high compressive strain rates
The design, fabrication and operation of a split Hopkinson bar apparatus is described. The theoretical basis for the experimental determination of material properties for materials subjected to high compressive strain rates using the split Hopkinson bar is discussed along with the assumptions made …
-
Analysis of the study of material behavior at impact rates of strain
… the practice of using cylindrical specimens in a Split-Hopkinson Pressure Bar experiment, the use of non-cylindrical prismatic specimens is convenient when testing extra-soft materials. A part of the current research aims to show the feasibility of using non-cylindrical specimens in a Kolsky Bar. …
-
Mechanical characterization of strain-hardening cement-based composites under impact loading
… extensively. As a result, a gravity driven split-Hopkinson tension bar was developed. The setup was used for performing impact tension experiments on SHCC, TRC and yarn-matrix bond. Moreover, its applicability for performing impact shear experiments was examined. Additionally, a mini …
Page 1 of 9