Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 115 for “"Split Hopkinson pressure bar"”.

  1. Dynamic properties of wood using the Split-Hopkinson Pressure Bar

    … affects the strength of a material. The Split-Hopkinson Pressure Bar (SHPB) was initially used to study the effects of high strain rate (~103 1/s) testing of metals. Later modifications to the original technique allowed for the study of brittle materials such as ceramics, concrete, and …

    mtu Repository record for Dynamic properties of wood using the Split-Hopkinson Pressure Bar (opens in a new tab)

  2. Assessing the effect of friction on compression split Hopkinson pressure bar tests

    … on accurate high strain rate material data. A Split Hopkinson Pressure Bar (SHPB) facility had previously been developed at the University of Cape Town to allow high strain rate testing of materials in compression. However, uncertainties regarding aspects of the test method that can affect the …

    cape-town Repository record for Assessing the effect of friction on compression split Hopkinson pressure bar tests (opens in a new tab)

  3. An Optical Method of Strain Measurement in the Split Hopkinson Pressure Bar

    The split Hopkinson pressure bar (SHPB) continues to be one of the most common methods of testing materials at medium rates of strain. Elevated rates of strain, such as those found in impact and explosive applications, have been shown to induce phenomena such as strain hardening and phase …

    vt Repository record for An Optical Method of Strain Measurement in the Split Hopkinson Pressure Bar (opens in a new tab)

  4. EXPERIMENTAL AND NUMERICAL SIMULATION OF SPLIT HOPKINSON PRESSURE BAR TEST ON BOROSILICATE GLASS

    … impact could be tested through controlled impact Split Hopkinson Pressure bar (SHPB) testing setup. This paper discusses the results of SHPB bar testing on 1018 cold rolled steel to validate the experimental procedures and result analysis. The work has been extended to conduct testing on …

    mtu Repository record for EXPERIMENTAL AND NUMERICAL SIMULATION OF SPLIT HOPKINSON PRESSURE BAR TEST ON BOROSILICATE GLASS (opens in a new tab)

  5. Development of Split-Hopkinson pressure bar apparatus for dynamic testing of nonlinear elastic metamaterials

    … the design, development, and qualification of a split-Hopkinson pressure bar (SHPB) apparatus at the Applied Research Laboratories at the University of Texas at Austin (ARL:UT) with the intent of physically testing nonlinear elastic metamaterials—artificially-developed media that can manipulate …

    texas Repository record for Development of Split-Hopkinson pressure bar apparatus for dynamic testing of nonlinear elastic metamaterials (opens in a new tab)

  6. Adiabaticity of high strain rate compression testing using the Split Hopkinson Pressure Bar Apparatus

    In the development of explosively formed projectiles (EFPs), researchers are faced with the problem of testing prospective metals at high strain rates. So far it has been assumed that, relative to the cooling time, the deformation time is practically instantaneous indicating that the test is …

    lethbridge Repository record for Adiabaticity of high strain rate compression testing using the Split Hopkinson Pressure Bar Apparatus (opens in a new tab)

  7. Preliminary Investigation of Ultra-High Performance Concrete Behavior at High Strain Rates using the Split-Hopkinson Pressure Bar

    … strength concrete (NSC). In past research, Split-Hopkinson pressure bar (SHPB) tests have been used for normal strength concrete to determine material behavior at high strain rates. The behavior of advanced concrete materials, such as UHPC, under high strain rates has not been thoroughly …

    mtu Repository record for Preliminary Investigation of Ultra-High Performance Concrete Behavior at High Strain Rates using the Split-Hopkinson Pressure Bar (opens in a new tab)

  8. High-Strain Rate Tensile Characterization Of Graphite Platelet Reinforced Vinyl Ester Based Nanocomposites Using Split-Hopkinson Pressure Bar

    … tests are performed applying the reverse impact Split Hopkinson Pressure Bar (SHPB) technique. The specimen geometry for tensile test is parametrically optimized by Finite Element Analysis (FEA) using ANSYS Mechanical APDL®. Uniform stress distribution within the specimen gage length has been …

    mississippi Repository record for High-Strain Rate Tensile Characterization Of Graphite Platelet Reinforced Vinyl Ester Based Nanocomposites Using Split-Hopkinson Pressure Bar (opens in a new tab)

  9. Numerical and experimental studies on the use of a Split Hopkinson Pressure Bar for high strain rate tension testing

    The Split Hopkinson Pressure Bar (SHPB) technique is widely used to dynamically characterize metals and is increasingly being used to characterize non-metallic materials such as fiber reinforced polymeric composite materials. However, the tensile version of the SHPB apparatus requires specimen …

    wichita-thes Repository record for Numerical and experimental studies on the use of a Split Hopkinson Pressure Bar for high strain rate tension testing (opens in a new tab)

  10. Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling

    … consisting of uniaxial compressive tests and Split Hopkinson Pressure bar tests were performed to cover low and high strain rates. The method’s ability to use low strain rate data to predict high strain rate behavior using the Johnson-Cook material model was evaluated. Numerical modeling and …

    chalmers Repository record for Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling (opens in a new tab)

  11. THE DYNAMIC CHARACTERIZATION OF IMPACT-MITIGATING MATERIALS USING ELECTROMAGNETIC VELOCITY GAUGES

    … This study was conducted using a polymeric Split-Hopkinson pressure bar while using electromagnetic velocity gauges for measuring stress-strain data to obtain material characteristics of the test specimens. Frequency domain characteristics were obtained by fitting a rheological model to test …

    maryland Repository record for THE DYNAMIC CHARACTERIZATION OF IMPACT-MITIGATING MATERIALS USING ELECTROMAGNETIC VELOCITY GAUGES (opens in a new tab)

  12. THE DYNAMIC BEHAVIOR OF POLYUREA COMPOSITES SUBJECTED TO HIGH STRAIN RATE LOADING

    … are validated experimentally using the Split Hopkinson Pressure Bar (SHPB) which is used to monitor the dynamics of the polyurea composites at different levels of strain rates. Close agreements are demonstrated between the theoretical predictions and the obtained experimental results. …

    maryland Repository record for THE DYNAMIC BEHAVIOR OF POLYUREA COMPOSITES SUBJECTED TO HIGH STRAIN RATE LOADING (opens in a new tab)

  13. Mitigation of Vehicular Crashes into Masonry Walls with Innovative Auxetic Composites

    … the impact resistance of masonry walls. Using Split Hopkinson Pressure Bar and drop-weight tests, it evaluates mechanical performance, energy absorption, and failure mechanisms of auxetic versus conventional carbon fabric composites under high strain rates. Results show ATRM offers superior …

    adelaide Repository record for Mitigation of Vehicular Crashes into Masonry Walls with Innovative Auxetic Composites (opens in a new tab)

  14. Development of a High Strain-Rate Constitutive Model for Sands and its Application in Finite Element Analysis of Tunnels Subjected to Blast

    … rate-independent triaxial compression test and split Hopkinson pressure bar test. The model is implemented in the finite element software Abaqus through user defined material subroutines. Finite element simulations of the split Hopkinson pressure bar experiments on Ottawa and Fontainebleau sands …

    uconn-diss Repository record for Development of a High Strain-Rate Constitutive Model for Sands and its Application in Finite Element Analysis of Tunnels Subjected to Blast (opens in a new tab)

  15. Analysis of the study of material behavior at impact rates of strain

    … the practice of using cylindrical specimens in a Split-Hopkinson Pressure Bar experiment, the use of non-cylindrical prismatic specimens is convenient when testing extra-soft materials. A part of the current research aims to show the feasibility of using non-cylindrical specimens in a Kolsky Bar. …

    msu Repository record for Analysis of the study of material behavior at impact rates of strain (opens in a new tab)

  16. Failure of Microelectromechanical Systems Under Dynamic Loading: An Experimental and Numerical Investigation

    … Experiments were conducted using the modified split hopkinson pressure bar to investigate the effects of loading amplitude, duration, and profile on the failure of the cantilever beams. Finite element simulations of these beams were conducted to provide more detailed information regarding the …

    uiuc Repository record for Failure of Microelectromechanical Systems Under Dynamic Loading: An Experimental and Numerical Investigation (opens in a new tab)

  17. Implementation of viscoelastic Hopkinson bars

    … soft or low impedance materials using metallic bars in a split Hopkinson pressure bar setup, poor signal to noise ratios and impedance mismatching occur. One solution is to use polymeric Hopkinson bars. In this dissertation, Polycarbonate, Polymethyl Methacrylate and Nylon are considered for use …

    cape-town Repository record for Implementation of viscoelastic Hopkinson bars (opens in a new tab)

  18. Dynamic material characterisation of solder interconnects in microelectronic packaging

    … and Sn-3.8Ag-0.7Cu was carried out using the split Hopkinson pressure bar (SHPB). Each solder was cast at three different cooling rates (slow cooling, moderate cooling and quench cooling) to understand how microstructure and material response change with the variation of rate of solidification …

    nus Repository record for Dynamic material characterisation of solder interconnects in microelectronic packaging (opens in a new tab) Download file for Dynamic material characterisation of solder interconnects in microelectronic packaging (opens in a new tab)

  19. MODELLING AND SIMULATION MICROMACHINING OF THE ADDITIVELY MANUFACTURED METAL PARTS

    … quasi-static compressive mechanical response and split-Hopkinson pressure bar tests of SLMed 316L to identify Johnson-Cook constitutive model constants; quasi-static tensile mechanical response and split-Hopkinson tensile bar tests to identify dynamic damage model constants for SLMed 316L …

    nus Repository record for MODELLING AND SIMULATION MICROMACHINING OF THE ADDITIVELY MANUFACTURED METAL PARTS (opens in a new tab) Download file for MODELLING AND SIMULATION MICROMACHINING OF THE ADDITIVELY MANUFACTURED METAL PARTS (opens in a new tab)

Page 1 of 6