Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"Spray angle"”.
-
Influence of spray angle and carrier gas type on micro cold spray deposition of Cu coatings on AlN substrates
Deposition onto conformal or angled surfaces not normal to the deposition nozzle is one of the primary impediments to implementing micro cold spray (MCS) as a film deposition technique for mass production. Increasing the ability for MCS techniques to effectively deposit on the complex geometries …
-
Spray characterization under flash boiling conditions of a DI multi-hole injector at high injection pressures in a combustion vessel
Spray characterization under flash boiling conditions was investigated utilizing a symmetric multi-hole injector applicable to the gasoline direct injection (GDI) engine. Tests were performed in a constant volume combustion vessel using a high-speed schlieren and Mie scattering imaging systems. …
-
Effervescent Atomization through Circular and Elliptical Nozzles
… crossflow are experimentally studied. The spray angle of an effervescent atomizer with an elliptical orifice is measured by employing the shadowgraph technique. Spray images were captured from both the minor and major axis views. The gas-liquid mass flow rate ratio (GLR) is in the range of …
-
A movable experimental system for observing pressurized sprays
Sprays are used throughout industry and research for applications such as combustion, spray painting, powder formation, drying, and fire suppression. Atomization is the process through which sprays are formed by the break-up of liquids into droplets and ligaments. Investigations of the near-, mid-, …
-
Application of computational fluid dynamics for high energy efficiency design with human comfort of Cad-Vav and Ufad systems
… study which show good agreement. The spray angle of the swirl diffuser is considered to be the crucial part and the airflow distribution strongly depends on the spray angle. A Parametric study has been made on the spray angle of the swirl diffuser considering the spray angle from 3° …
-
The factors governing stability and combustion intensity in "mechanically" atomised oil flames.
… The variables chosen were fuel rate and spray angle. Data obtained consisted of gas composition, velocity and temperature measurements. The development of a laboratory unit was considered desirable to provide a means of facilitating measurements on flames of this type and a rig was …
-
A numerical study of the multi-component effects on the combustion and evaporation of biofuels and blends
… NOx emissions. The effects of injection timing, spray angle and fuel composition are studied using a modified version of KIVA 3V code. The objectives of this research include: 1) to examine the effects of fuel on engine performance and emissions; 2) to study the effects of spray angle on flow …
-
Design and development of a variable-flow fan nozzle using phase-partition air sampling for drift assessment
… a phase-partition air sampler (PPAS) to evaluate spray drift from the VFFN. Relationships of spray angle, spray thickness, droplet size, and the spray velocity to the nozzle geometry were analytically explained by the new model. Three VFFN prototypes with spray angles of 50, 70 and 90 degrees and …
-
Characteristics of Combustion Flame Sprayed Nickel Aluminum Using a Coanda Assisted Spray Manipulation Collar for Off-Normal Deposits
A novel flame spray collar called the Coanda Assisted Spray Manipulation collar (CSM) has been tested for use on the Sulzer Metco 5P II combustion flame spray gun. A comparison study of the stock nozzle and the CSM has been performed by evaluating the porosity, surface roughness, microhardness, …
-
Pressurized Metered-Dose (pMDI) Aerosol Spray Deposition in Large-and Medium-Volume Spacers
… be greater in the lower half due to a downward spray angle. Additionally, it was determined more deposition of medication could be expected in the distal half of the spacers. An increase in flow rate demonstrated a minimal increase (2-3%) in the medication delivered to the inline filter. The …
-
Diesel Spray Studies in Modern Diesel Engines
In this doctoral thesis, diesel injection and spray formation in modern diesel engines were studied. The goal of this thesis is to answer some fundamental questions and hypotheses about injection and spray formation in modern diesel engines. First, the fundamental spray characteristics of renewable …
-
Internal flow and spray characteristics of an outwards opening pintle-type gasoline-injector
The focus of the present study was on the spray characterization of an outwards opening pintle-type injector to be used for spray-guided direct injection spark-ignition (DISI) engines. This spray-guided approach requires excellent spray performance and stability over a wide range of operating …
-
A study into the effects of spray and jet characteristics on flash evaporation system
… a comprehensive insight into the atomization of sprays or jets in seawater flashing spray desalination. Alternatively, most of the earlier research focused at the macro scale whereby the general process of flashing and its performance was studied. Little or no information is available on the …
-
Heat transfer and evaporation in spray cooling of hot gas flows, including the effect of nozzle design
This study investigates the influence of spray nozzle internal geometry on heat transfer performance and the resultant power requirements. An experimental apparatus was designed and built, which allowed for close control of the heat transfer from air to water and the required energy for droplet …
-
Experimental and analytical study on two-phase impingement cooling with and without electric field
… for power electronics, two-phase jet or spray impingement cooling are two promising candidates. In this study, electrohydrodynamic atomization (EHDA) method is used to generate spray and jet from the same capillary. This approach enables us to compare the heat transfer coefficient and …
-
Flow Field Measurements in a Counter-Swirl Stabilized Liquid Combustor
… measurements were taken to determine the fuel spray characteristics as a function of operating pressure and rated spray angle. Chemical composition at the combustor exit was also measured, with an emphasis on the concentrations of both CO and NOx emissions. This large database of aerodynamic …
-
Investigation of Direct Injection Fuel Sprays in High Velocity Air Flows
The study of single-plume sprays into cross-flowing air is found extensively in literature, however, with the continued development of the Spark Ignition Direct Injection (SIDI) engine, the behaviour of multi-plume sprays in cross-flowing conditions is of interest. In the present work, the …
-
Experimental studies of the near-nozzle region of a coaxial spray
<p>Understanding the near nozzle region of a spray is integral to spray optimization and control efforts because this region is where liquid break up and spray formation occurs, setting the conditions under which the spray dynamics evolve. However, the near-nozzle region of sprays is not yet well …
-
Characterization of Conical and Elliptical Fuel Spray Nozzles using Non-Intrusive Laser Diagnostic Methods
Spray nozzles and atomizers have several applications in many forms of industry such as aerospace, automotive, combustion, pharmaceutical, and spray coating industries. These nozzles vary in design and performance depending on the application they are used in. Nevertheless, the primary objective …
-
Study of Injector Performance from an Accumulator-Based Plumbing System
… battery that delivers fuel to injectors. The spray pattern and droplet kinematic characteristics from the injector under static conditions is measured optically using Mie Scattering and Shadowgraph techniques. This will help demonstrate injector performance compared to other plumbing-based …
Page 1 of 2