Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 98 for “"Spring constant"”.
-
Laterally loaded rigid piers in sand and sandy soils
… sandy soils. This model utilizes several soil spring constants to analyze the resistance-displacement relationship of the pier in sand and sandy soils. The soil spring constants used are lateral spring constants, bottom vertical spring constant, bottom friction spring constant, bottom moment …
-
Carbon Fiber Coil Spring Characterization and Manufacturing
Helical coil springs are used in many mechanical design applications including industrial machines, devices, and vehicle suspension systems. It is desirable to minimize the weight of vehicle suspension systems as this can improve performance and handling. Most vehicle suspension coil springs are …
-
Representation of the non-rigidity between a cam and a roller follower by a spring with a determined constant
… in the system was then represented by a spring with a determined spring constant.</p> <p>The end result of this investigation was an expression for the spring constant representing the non-rigidity in the system. Several additional avenues for study are suggested to build upon the results …
-
Mechanical Characterization of Patterned Silver Columnar Nanorods with the Atomic Force Microscope.
… atomic force microscope was used to measure the spring constant in 10 nm increments along the long axis of five 670 nm long Ag nanorod specimens. The simple beam bending model was used to analyze the data. Unexpected behavior of the spring constant data was observed which prevented a conclusive …
-
Time domain approach to identify system properties in coupled structures
… consist of two beams that are coupled with a spring between them has been studied. Free mobilities are identified as system properties of the coupled structure. The first approach was a virtual study comparing the free mobilities from the simulation and using the time domain approach. LMS …
-
Structural Locking in a Nastic Actuated Shaped-Changing Beam
… generated +2 degrees twist and maximum 1.49MN/m spring constant at the spar tip. This spring constant helps a designer select the locking material, Ultem. The analysis proves that the Ultem film?s shear spring constant is high enough to hold the aluminum spar?s spring back. Physical experiment …
-
Mechanical compression of coiled carbon nanotubes
… was determined in three ways. In the first, the spring constant of each nanocoil was computed from the slope of the linear response region of the force-distance curve. The assumptions upon which this calculation is based are: 1) under compression, the cantilever-nanocoil system can be modeled as …
-
Opto-Electric Parametric Amplification of Mechanical Resonators for Thermal Noise Squeezing
… the fiber, effectively changing the cantilever’s spring constant. Such spring-constant-tuning gives rise to a mechanical preamplification of the cantilever’s oscillation, which can be used to amplify the signal for improving the signal-to-noise ratio and to produce thermomechanical squeezed states …
-
Experimental studies of joint flexibility for PUMA 560 robot
… are linear in nature and a torsional spring constant 'k', is determined for each joint. This data is necessary for the inclusion of flexibility effects into the equations of motion.
-
Cement Stabilized Crushed Stone Base Course Strength and Stiffness Analysis
… of the concrete pavement, with the composite spring constant (kc), which is calculated from subgrade resilient modulus, subbase modulus of elasticity (MOE), and the subbase depth. The ME instead includes material properties such as MOE and Poisson’s ratio, in addition to a large list of other …
-
Theory and applications of atomic force microscopy microcantilevers
… the sample surface. By using a cantilever with a spring constant much less than the effective spring constants of the atoms in the sam-ple, sample damage can be avoided. However, other interaction forces such as capillary forces can produce undesirable deformation and permanent damage of the …
-
Effect of pavement support condition on CRCP behavior and performance
… characterized by elastic medium such as a spring constant. Analysis of PCC pavement behavior with a spring constant for pavement performance prediction has severe limitations, with the primary limitation being that base stiffness has little effect on the stresses and resulting performance …
-
Interaction forces, deformation and nano-rheology of emulsion droplets as determined by colloid probe AFM
… elastic deformation may be described by a single spring constant. The spring constant is proportional to the surface tension (as controlled by surfactant adsortion) and the reciprocal of the droplet radius, i.e. deformation is controlled by the Laplace pressure. Furthermore, droplet deformation is …
-
Transient Response of Linear Damped Lumped Spring-Mass Systems by Experimentally Derived Transfer Functions
… of linear undamped and lightly damped lumped spring-mass systems must be determined. If a model representing the system to be tested is available, it is possible to determine the responsive motion by several different approaches. Most of these methods require solving the differential equation …
-
Analytical Modeling and Simulation of Capacitive Micromachined Ultrasonic Transducer
… analytical cMUTs modeling is characterized for spring constant, resonant frequency and pull-in voltage. COMSOL Multiphysics 4.3b is use for simulation the profound insight of cMUTs’ behavior such as: resonant frequencies, pull-in voltage, membrane’s deflection and implied spring constant. This …
-
Controlling robotic swarm behavior utilizing real-time kinematics and artificial physics
… environment. A computer-simulated hookian spring force is used to control a swarm of robotic agents, a technique called artificial physics. The computer model applies a proportional spring constant based o position information, and the resultant force is applied to each agent respectively. …
-
Experimental Process Development for Scanning Thermal Microscopy in Air and Vacuum
… sample interface and methods of determining the spring constant of the cantilever. The thesis will then discuss the instruments that are used in the experiment, and the procedure for making thermal and force measurements. Thermal and force measurements were obtained with five different samples …
-
Detection and characterization of single nanoparticles using low-aspect-ratio silicon nitride nanopores
… of which gives different blockage current and spring constant. We also study the dependence of applied voltage on the blockage current and spring constant, which shows the ability to tune the position of trapping and force exerted on the nanoparticle. This new technique may find applications in …
-
Theoretical and experimental investigation of oscillating heat pipes
… The model considers the vapor bubble as the gas spring for the oscillating motions in a capillary tube including effects of capillary force, gas spring constant, dimensions, gravitational force, and initial pressure distribution of the working fluid. Numerical results indicate that the isentropic …
-
The Correlated Dynamics of Micron-Scale Cantilevers in a Viscous Fluid
… of stiffness ratios, which is the ratio of the spring constant of the tethering relative to the cantilever spring constant, the change in the correlated dynamics of a Hookean spring tethered cantilever pair can be seen in the presence of fluid coupling. The dynamics of a spring-mass tethered, …
Page 1 of 5