Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Spring force"”.

  1. The Dynamics of Dual Spring Force Couples in Torque Reversal Mechanisms

    … have long leveraged the explosive potential of spring actuated systems to generate high-power, rapid movements. The careful arrangement of springs and latches to transform stored elastic energy into fast, powerful strikes is known as Latch Mediated Spring Actuation (LaMSA). In LaMSA systems, …

    buffalo Repository record for The Dynamics of Dual Spring Force Couples in Torque Reversal Mechanisms (opens in a new tab)

  2. Design and Characterization of Self-Biasing NiTi Spring Actuator

    Spring actuators are essential components in vehicles as they are used for climate control, braking ventilation, engine control and fuel management. However, commercially available spring actuators are heavy and expensive and need to be replaced by lower-weight SMA spring actuators. Potential …

    waterloo Repository record for Design and Characterization of Self-Biasing NiTi Spring Actuator (opens in a new tab)

  3. Characterization of an Electromagnetic Tuned Vibration Actuator

    … With the electromagnetic field determined, the force to displacement relation between the stationary magnet and the absorber electromagnet is calculated. The best fit is determined to be an inverse square relationship. Once the spring force relation is determined, the damping mechanisms are …

    vt Repository record for Characterization of an Electromagnetic Tuned Vibration Actuator (opens in a new tab)

  4. Controlling robotic swarm behavior utilizing real-time kinematics and artificial physics

    … environment. A computer-simulated hookian spring force is used to control a swarm of robotic agents, a technique called artificial physics. The computer model applies a proportional spring constant based o position information, and the resultant force is applied to each agent respectively. …

    nps Repository record for Controlling robotic swarm behavior utilizing real-time kinematics and artificial physics (opens in a new tab)

  5. Investigation and model development of pressure relief valve leak tightness

    … of the contacting surfaces, based on the applied spring force, and the resultingmicro-flow of gas through any available gaps and the overall leakage to be found.;The API527 Seat Tightness methodology is followed to allow leakage rates to be measured and the computational model to be validated at a …

    strathclyde Repository record for Investigation and model development of pressure relief valve leak tightness (opens in a new tab)

  6. Investigating dynamic stiffening and softening of a system of colloids cross-linked via polymers

    … that connect the colloids via an attractive spring force, and investigate resulting collective properties, such as the time needed for the formation of system spanning networks and the elastic moduli, for various colloid densities, interaction strengths, and cross-linker rest lengths and …

    rit Repository record for Investigating dynamic stiffening and softening of a system of colloids cross-linked via polymers (opens in a new tab)

  7. Design and Evaluation of an Underactuated Lower Body Exoskeleton

    … the user's foot and their waist by compressing a spring in parallel with the user's leg during Stance Phase. The exoskeleton has a mass of 14.0 kg (30.8 lbs) and was tested up to a supplied spring force of 323.6 N (72.75 lbf) which equates to around 161.8 N (36.38 lbf) of assistive force at the …

    vt Repository record for Design and Evaluation of an Underactuated Lower Body Exoskeleton (opens in a new tab)

  8. Hydraulic Variable Valve Actuation on a Single Cylinder Engine

    … cam where pressurized fluid opens, and spring force closes, the engine valve. The pressurized fluid is supplied to, or removed from, the cylinder using rotary spool valves coupled to the engine crankshaft. Additionally, the system is modelled in Simulink to determine the effect of system …

    waterloo Repository record for Hydraulic Variable Valve Actuation on a Single Cylinder Engine (opens in a new tab)

  9. The application of contact mechanics to the numerical simulation of particulate material

    … by Cundall (1971), which employed linear spring force-displacement laws. It was thus necessary to incorporate more realistic interaction laws. Therefore, this research programme was primarily concerned with the implementation of the normal force-displacement law of Hertz (1882) and the …

    aston Download PDF for The application of contact mechanics to the numerical simulation of particulate material (opens in a new tab)

  10. The steady-state and dynamic performance of gas lubricated uniform film porous thrust bearings

    … the analysis. The experimental results for the forced vibration tests are presented as dimensionless performance character­ istics as represented by dynamic spring force and damping force and it is found that the simple linear model breaks down for large amplitudes of vibration.

    aston Download PDF for The steady-state and dynamic performance of gas lubricated uniform film porous thrust bearings (opens in a new tab)

  11. Nanoscale electrostatic actuators in liquid electrolytes: analysis and experiment

    … linear momentum equation including the following forces: the electric force, the osmotic force, the spring force, the viscous damping force, and the van der Waals force. Equations are also derived for the energy stored in the actuator. The analytical results emphasize the stored energy at …

    tamu Repository record for Nanoscale electrostatic actuators in liquid electrolytes: analysis and experiment (opens in a new tab)

  12. Physics and Applications of a PDMS Based Centrifugal Microfluidic System

    … tested. The first one is based on the magnetic force and the second one is on the basis of spring force and the last one is a membrane valve. All valving system demonstrate good control of the fluid movement. The latter two valves are capable of sequential control. It proves that the flyball …

    lsu-thes Repository record for Physics and Applications of a PDMS Based Centrifugal Microfluidic System (opens in a new tab)

  13. Radioisotope-Powered Self-Reciprocating Cantilever for Micro Power Generation

    … radioactive source. The resulting electrostatic force moves the cantilever toward the source. When the cantilever contacts the source, charges are neutralized and the spring force pulls the cantilever back to its initial position. This cycle repeats itself as long as the radioactive source is …

    cornell Repository record for Radioisotope-Powered Self-Reciprocating Cantilever for Micro Power Generation (opens in a new tab)

  14. RIDDS: Removal of Irregular Debris Using Double Nets

    … that the mechanism can successfully recompress springs and launch multiple nets. It is recommended that improvements be made to prevent spring bending and the masses from not fully deploying, make changes to increase the spring force, time be spent fully integrating the stepper motor, and that …

    embry-riddle Repository record for RIDDS: Removal of Irregular Debris Using Double Nets (opens in a new tab)

  15. Autonomous quasi-harmonic and forced vibration of frictional systems

    … by recording simultaneously the acceleration force, damping force, spring force and friction force during one cycle of the quasi-harmonic oscillation. The curves were expressed as a function of sliding velocity and were represented by nth order polynomials as well as by exponential …

    ubc Repository record for Autonomous quasi-harmonic and forced vibration of frictional systems (opens in a new tab) Download PDF for Autonomous quasi-harmonic and forced vibration of frictional systems (opens in a new tab)

  16. Registration of images containing rigid structures using deformable models and its medical application

    … is proposed in this thesis that uses a flexible spring-mass system to provide a good representation of image information. Anatomical structures are represented by spring masses and their interconnecting springs located along the structure boundaries. Hence, the system can treat some pre-selected …

    cent-lancashire Download PDF for Registration of images containing rigid structures using deformable models and its medical application (opens in a new tab)

  17. Predicting changes in lung structure and function during emphysema progression through network modeling methods

    … the structure and function by creating CT-based spring network models of the lung parenchyma and manipulating these networks to predict the regional tissue stiffness and global pressure-volume relationship of the lung during disease progression. The goal of this thesis is to predict these …

    bu Repository record for Predicting changes in lung structure and function during emphysema progression through network modeling methods (opens in a new tab)

  18. The Analysis and Synthesis of Spatial Compliance

    The spatial force-deflection behavior of an elastically suspended body is characterized by a 6 x 6 positive semidefinite matrix, the stiffness matrix. A better understanding of general compliant behavior is of general interest and is particularly important in understanding the behavior of robotic …

    marquette Repository record for The Analysis and Synthesis of Spatial Compliance (opens in a new tab)

  19. Low voltage large stroke bipolar tri-electrode electrostatic actuator for deformable mirrors in adaptive optics

    … using the finite element method and restoring spring force method, as well as experimentally. The design studies were dimensionless. Therefore, the optimizations can be used for an actuator of any size. The studies showed that the controlling voltage of the actuator can be decreased …

    manitoba Repository record for Low voltage large stroke bipolar tri-electrode electrostatic actuator for deformable mirrors in adaptive optics (opens in a new tab)

  20. Tesla Turbine Torque Modeling for Construction of a Dynamometer and Turbine

    … Tesla turbine stall torque was measured using a spring force gauge. Two methods were chosen to model Tesla turbine stall torque: 1) flow over flat plate and 2) free vortex with a sink. A functional dynamometer and thermodynamic apparatus were constructed once the model was confirmed to be within …

    unt Repository record for Tesla Turbine Torque Modeling for Construction of a Dynamometer and Turbine (opens in a new tab)

Page 1 of 2