Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Sprung Mass"”.
-
Vehicle Sprung Mass Parameter Estimation Using an Adaptive Polynomial-Chaos Method
… was assumed to be concentrated in the sprung mass parameter, a novel pseudo mass matrix was developed for generating the state-space PCE model. In order to implement the PCE model in a real-time adaptation routine, a novel technique for representing PCE output equations was also …
-
Experimental Validation of a Numerical Controller Using Convex Optimization with Linear Matrix Inequalities on a Quarter-Car Suspension System
… to the actuating effort with the change in the sprung mass of the quarter-car system. The quarter-car system makes use of a linear brushless permanent magnet motor (LBPMM) as an actuator, a linear variable differential transformer (LVDT) and two accelerometers as sensors for feedback control and …
-
Effect of center of gravity location on optimum performance of random vibratory vehicle suspension
… vehicle suspension system, consisting of a sprung mass (vehicle body) and two unsprung masses (wheel frame), accentuated by the implementation of a damped absorber to the unsprung masses. Further, the effect of the c.g. (center of gravity) location of the vehicle body is investigated. A two …
-
Active Suspension Design Requirements for Compliant Boundary Condition Road Disturbances
… the system that can minimize the response of the sprung mass. This is done using actuators. Actuator design in vehicle suspension system is an important research topic and a lot of work has been done in the field but little work has been done to estimate the peak control force and bandwidth …
-
On the estimation of center of gravity height of arbitrarily loaded articulated freight vehicle
… to the center of gravity height of the trailer sprung mass, which tends to vary considerably. The developments in the rollover warning devices have been mostly limited due to extreme complexities associated with the onsite measurement of the center of gravity height of an arbitrarily loaded …
-
Vehicle active suspension system sensor reduction
… time. Active suspension systems isolate vehicle sprung mass from terrain disturbances. These systems require vehicle mounted sensor information to control vehicle ride. Sensors add additional complexity and cost, and thus reduction in sensors is a potential approach to lowering cost and improving …
-
Influence of nonlinear asymmetric suspension properties on the ride characteristics of road vehicle
… and extension, respectively, yields the sprung mass drift in the opposite direction. Suspension springs with asymmetric characteristics may thus reduce the magnitude of the sprung mass drift.
-
An analytical investigation of a Panhard rod restraint for beam-axle vehicle suspensions
… of the suspension roll center and the sprung mass gravity center, the effective roll stiffness as a function of the magnitude of centrifugal force excitation, roll input, vehicle load and the Panhard rod design parameters. Two roll plane dynamic models of the candidate vehicle with …
-
Investigation of a non-linear suspension in a quarter car model
… the dynamics are evaluated in terms of the main mass displacement and acceleration. The simulation of the car dynamics is performed using Matlab® and Simulink®. The realization of vibration reduction through one-way irreversible nonlinear energy localization which requires no pre-tuning in a …
-
Robust multi-objective design of suspension systems
… involves tuning the coefficients of the sprung spring and damper, tire stiffness, and inertance of the inerter. Suspension systems’ parametric variations are very common and cannot be avoided in practice. To this end, a robust multi-objective optimization method that takes into …
-
Estimation of Disturbance Inputs to a Tire Coupled Quarter-car Suspension Test Rig
… handling and aerodynamic forces, acting on the sprung mass of a quarter-car suspension test rig was generated. This information is intended for use in active control methods applied to vehicle suspensions. This estimate is achieved with two acceleration measurements as inputs to the estimator; …
-
Design of active suspension control based upon use of tubular linear motor and quarter-car model
… was to minimize the acceleration of the sprung mass in the presence of simulated road disturbances, modeled by both sinusoidal and step input excitation wheels. Different reference velocity inputs were applied to the control scheme. Responses to a zero reference were juxtaposed to those …
-
Localized-Based Control Algorithm For Passenger Ride Comfort
… algorithms are for the vertical motion of a sprung mass, or an unsprung mass at each corner of a vehicle. The proposed localized-based control algorithm is a controller that can change its target location in a vehicle to where it is needed most. Simulation results show that the …
-
On the Development of a Real-Time Embedded Digital Controller for Heavy Truck Semiactive Suspensions
… semiactive damper simulates a damper between the sprung mass and an inertial reference) to control magneto-rheological dampers placed on the truck 's primary suspension in response to measurements made by accelerometers placed on the axle and the truck frame. The completed system was then tested …
-
Ride dynamic response of commercial vehicles subjected to wheel unbalance and non-uniformity effects
… under excitations arising from a range of mass unbalance and wheel non-uniformity, and phase differences in the defects of the front and rear wheels. A comprehensive parametric sensitivity analysis is carried out to study the vehicle response subjected to all the excitations. The response …
-
Analysis of hydro-pneumatic interconnected suspension struts in the roll plane vehicle model
… power spectral densities and RMS values of the sprung mass responses to random road excitation
-
Mejoramiento de un sistema mecanico por control activo
… element. The system is simulated by idealized masses, springs and dashpots. The proposed active compQ nent is visualized as a servo mechanism ora force transducer which recieves one of the variables of the system as an input and yields a control signal according to a prescribed law. The latter …
-
Dynamic Analysis of Semi-Active Control Techniques for Vehicle Applications
… Specifically, transmissibilities between the sprung mass displacement and the unsprung mass displacement are generated relative to the input displacement. Further, the ratio between the relative displacement across the damper and the input displacement is evaluated for each control technique. …
-
Novel Semi-Active Suspension with Tunable Stiffness and Damping Characteristics
… handling (i.e. tire deflection), and undamped sprung mass natural frequency. The goal is to minimize the first three objectives, while maximizing the latter to avoid motion sickness starting from 1Hz and downward. However, these goals cannot be attained simultaneously, necessitating compromises …
-
The effect of suspension damping on vehicle response to transient road inputs
… (OOF) quarter car model, the effect of the unsprung mass on the peak acceleration is investigated by numerical simulations. The acceleration shock re sponse spectrum of the two OOF system is compared with that of the SOOF system. Exper imental work involving the measurement of accelerations of …
Page 1 of 3