Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Sputtering Parameters"”.

  1. Tuning Magnetron Co-Sputtering to Synthesize Combinatorial Libraries of Metallic Glass Thin Films

    … MG thin films consistently is magnetron co-sputtering due to the high cooling rate of the process. Magnetron co sputtering, however, requires a high degree of individual, system and circumstance specific, tuning to achieve an accurate composition and thickness of a synthesized film. Once …

    unr Repository record for Tuning Magnetron Co-Sputtering to Synthesize Combinatorial Libraries of Metallic Glass Thin Films (opens in a new tab)

  2. Growth and Characterization of ZnO for the Front Contact of Cu(In,Ga)Se2

    … layers for CIGS solar cells are grown with a DC sputtering technique instead of a conventional RF sputtering technique. Transparent window layers and buffer layers are sputtered from the Zn target in the presence of Oxygen. The window layer is doped with Aluminum in order to achieve high …

    usf Repository record for Growth and Characterization of ZnO for the Front Contact of Cu(In,Ga)Se2 (opens in a new tab)

  3. Optimization of Sputtered Hafnium Zirconium Oxide Ferroelectrics for Memory Applications

    … standard atmospheric conditions. Therefore, sputtering, being a non-equilibrium process, can be advantageous in stabilizing the metastable crystal structure of HfO2 in thin film. With regard to the practical processing, the incorporation of ferroelectric (FE) HfO2 in the front-end-of-line …

    qucosa-diss

  4. Optimisation and fabrication of ultra violet emitting CuC1 thin films by RF sputtering

    … this thesis, growth of CuCl using RF magnetron sputtering is investigated in detail. Stoichiometry and microstructure are the two major deciding factors for the UV emission from the film. We have successfully controlled both these properties by varying the sputtering parameters. Chemical …

    dcu Download PDF for Optimisation and fabrication of ultra violet emitting CuC1 thin films by RF sputtering (opens in a new tab)

  5. Investigation of Si Anode for LI-ion Batteries

    … of this study was to investigate the effect of sputtering parameters and nano-structuring on the performance of silicon as an anode for lithium-ion batteries. Though silicon has a high theoretical specific capacity (4200mAh/g), large volume expansion (400%) during lithiation leading to the …

    nus Repository record for Investigation of Si Anode for LI-ion Batteries (opens in a new tab) Download file for Investigation of Si Anode for LI-ion Batteries (opens in a new tab)

  6. Daugiasluoksnių titano ir silicio oksidų dangų nusodintų jonapluoščio dulkinimo technologija optinių charakteristikų tyrimas /

    … silicon oxide structures, deposited by ion beam sputtering Vaida Grašytė This work aimed to determine the parameters for which titania monolayers have the best optical and physical properties and to study the properties of multilayer titania/silica coating. Tasks: A) Determine the deposition rate …

    vilnius Repository record for Daugiasluoksnių titano ir silicio oksidų dangų nusodintų jonapluoščio dulkinimo technologija optinių charakteristikų tyrimas / (opens in a new tab)

  7. Deposition and characterization of HfO₂ thin films

    … wafer substrates using magnetron RF reactive sputtering techniques. Structure and morphology of the thin films were investigated by x-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Results revealed that the sputtered HfO₂ thin films were …

    vt Repository record for Deposition and characterization of HfO₂ thin films (opens in a new tab)

  8. An investigation of electrical and physical properties of reactively, diode sputtered silicon nitride thin films

    … thin films were deposited by r.f. reactive sputtering of silicon in nitrogen and argon discharge. Biased and unbiased modes of diode mode sputtering were used. Typical parameters for a sputter deposition run were: base pressure, 1-2x10-6 torr; sputtering pressure, 5-7 mtorr; nitrogen partial …

    njit Repository record for An investigation of electrical and physical properties of reactively, diode sputtered silicon nitride thin films (opens in a new tab)

  9. An investigation of electrical and optical properties of sputtered amorphous silicon nitride and germanium thin films

    … was investigated. Influence of various sputtering parameters on film properties was studied. Infrared transmission spectrophotometry was used to evaluate optical properties of the films whereas electrical characteristics of the films were determined from current-voltage measurements of …

    njit Repository record for An investigation of electrical and optical properties of sputtered amorphous silicon nitride and germanium thin films (opens in a new tab)

  10. Niobium titanium nitride thin film deposition, optimization, and characterization

    … and is easily deposited via reactive magnetron sputtering from metal sputter targets at low substrate temperatures compatible with thermally sensitive fabrication processes. In this thesis, a deposition process for NbTiN thin films was developed and optimized using reactive high power impulse …

    unf Repository record for Niobium titanium nitride thin film deposition, optimization, and characterization (opens in a new tab) Download PDF for Niobium titanium nitride thin film deposition, optimization, and characterization (opens in a new tab)

  11. Reactive radio frequency sputtering of iron oxide thin films for electrical resistivity characterization

    … reactive (in an oxygen/argon atmosphere) sputtering was chosen. In addition, to avoid the problems of sputtering oxides by Electron Beam evaporation or Direct Current sputtering, the recently developed technique of Radio Frequency sputtering was employed. Thus, the iron oxide thin films …

    vt Repository record for Reactive radio frequency sputtering of iron oxide thin films for electrical resistivity characterization (opens in a new tab)

  12. Sputter Deposition Processes For Thin Film Oxide Dielectrics

    … for optimization. The choices made for these sputtering parameters can effect significant variation in dielectric properties. We find that for the complex amorphous dielectric oxide of Zr sub(0.2) Sn sub(0.2) Ti sub(0.6) O sub(2) , the dielectric constant is strongly dependent on substrate …

    cornell Repository record for Sputter Deposition Processes For Thin Film Oxide Dielectrics (opens in a new tab)

  13. Efeito Kerr magneto-óptico; Ressonância ferromagnética; Acoplamento bilinear; Acoplamento biquadrático

    … < t < 40 Å. The samples were deposited by the DC Sputtering on Magnesium Oxide (MgO) substrates, with (100) crystal orientation. For this investigation, experimental magneto-optical Kerr effect (MOKE) magnetometry and ferromagnetic resonance (FMR) techniques were employeed. In this case, these …

    brazil-ufrn Repository record for Efeito Kerr magneto-óptico; Ressonância ferromagnética; Acoplamento bilinear; Acoplamento biquadrático (opens in a new tab)

  14. Dielectric Thin-Films for Improving the Durability of AC Electrothermal Microfluidic Devices

    … the durability of ACET micropump electrodes. RF-sputtering was investigated as a means to produce high-permittivity thin-film dielectrics. RF-sputtering is a widely-available method to coat high purity thin-films. Sputtering parameters (including power, oxygen content and temperature) were …

    calgary Repository record for Dielectric Thin-Films for Improving the Durability of AC Electrothermal Microfluidic Devices (opens in a new tab)

  15. ULTRA-NEAR-SURFACE GALLIUM-ACTIVATED 435NM LUMINESCENCE FROM DONOR-ACCEPTOR-PAIR RECOMBINATION IN ION-BEAM IMPLANTED 4H SIC

    … oriented AlN thin film is manufactured by using sputtering techniques, and the influence of sputtering parameters on crystal orientation is discussed in Chapter 4. The AlN encapsulation layer serves to protect and passivate the SiC and nano-scale ion implantation regions under extreme annealing …

    mcmaster Repository record for ULTRA-NEAR-SURFACE GALLIUM-ACTIVATED 435NM LUMINESCENCE FROM DONOR-ACCEPTOR-PAIR RECOMBINATION IN ION-BEAM IMPLANTED 4H SIC (opens in a new tab)

  16. Magnetron Sputtered Zn₂SiO₄ and Y₂O₃-SiO₂ Thin Film Phosphors for Cathodoluminescent and Electroluminescent Displays

    … Zn₂SiO₄ thin films were prepared by magnetron sputtering. Their compositions were studied by Rutherford backscattering and X-ray diffraction. Sputtering parameters such as magnetic field, pressure, target-substrate distance and substrate temperature were studied. The chromaticity coordinates …

    mcmaster Repository record for Magnetron Sputtered Zn₂SiO₄ and Y₂O₃-SiO₂ Thin Film Phosphors for Cathodoluminescent and Electroluminescent Displays (opens in a new tab)

  17. An investigation of electrical and optical properties of reactively sputtered silicon nitride and amorphous hydrogenated silicon thin films

    … The effect of various sputter deposition parameters on the conduction and optical properties were studied. Infrared spectrophotometry and ellipsometry were used to determined the optical properties of the films whereas the electrical properties were determined from current-voltage …

    njit Repository record for An investigation of electrical and optical properties of reactively sputtered silicon nitride and amorphous hydrogenated silicon thin films (opens in a new tab)

  18. Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity

    … modulating the substrate, and various magnetron sputtering parameters to produce smooth and continuous SAC305 thin film. A comprehensive annealing treatment was carried out in a vacuum furnace to investigate the surface morphology of the films. Various deposition parameters were tested using DC …

    odu Repository record for Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity (opens in a new tab)

  19. Magnetron Sputtering and Corrosion of Ti-Al-C and Cr-Al-C coatings for Zr-alloy Nuclear Fuel Cladding

    … [Aluminum Oxide] substrates under various sputtering conditions. A combinatorial sputtering method was employed to refine the sputtering parameters. Following each deposition, the coatings were characterized using grazing incidence x-ray diffraction. The crystal structures of the as …

    ut-knoxville Repository record for Magnetron Sputtering and Corrosion of Ti-Al-C and Cr-Al-C coatings for Zr-alloy Nuclear Fuel Cladding (opens in a new tab)

  20. Investigation and development of titanium nitride solid-state potentiometric pH sensor

    … manufactured using radio frequency magnetron sputtering. The effect of sputtering parameters (e.g., thickness, sputter power, gas composition) were investigated to optimize the materials for use as pH sensor. Additionally, the underlining mechanism governing the pH sensitivity of these metal …

    edithcowan Repository record for Investigation and development of titanium nitride solid-state potentiometric pH sensor (opens in a new tab)

Page 1 of 2