Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Sqnr"”.

  1. Optimization of Quantization Levels for Analog-to-Digital Converters Based on Discrete Multitone Signals

    … rate (BER), signal-to-quantization-noise ratio (SQNR), and achievable bit rate. A MATLAB system-level model with 2000 sub-channels, per-tone equalization, and an EVM-based BER estimator is evaluated on two channel responses (smooth and notched) at 64, 80, and 100 GS/s. Three non-uniform ADC …

    carleton Repository record for Optimization of Quantization Levels for Analog-to-Digital Converters Based on Discrete Multitone Signals (opens in a new tab)

  2. A Comparative Study of Sigma Delta and Nonuniform Sampling A/D Converters

    … achieved Signal to Quantization Noise Ratio (SQNR) and the computational complexity. Relaxation of the performance requirements of an Anti-Aliasing Filter (AAF) preceding an ADC can be achieved with oversampling and nonuniform sampling of the input signal, which is implemented in both the …

    mtu Repository record for A Comparative Study of Sigma Delta and Nonuniform Sampling A/D Converters (opens in a new tab)

  3. Simulation, and Overload and Stability Analysis of Continuous Time Sigma Delta Modulator

    … output signal to quantization noise ratio (SQNR) decreases when the sigma delta modulator's input is increased over a certain value. In this dissertation, the range of quantizer gains that cause overload are determined and the values ware used to determine the input signal power that …

    unlv Repository record for Simulation, and Overload and Stability Analysis of Continuous Time Sigma Delta Modulator (opens in a new tab) Download PDF for Simulation, and Overload and Stability Analysis of Continuous Time Sigma Delta Modulator (opens in a new tab)

  4. Efficient Mixed-Precision Inference for Vision Transformers

    … la relación señal-ruido de cuantización (SQNR) a lo largo de las capas, identificando una correlación directa entre los valores SQNR y los errores de cuantización. Proponemos un método de PTQ de precisión mixta, sencillo pero efectivo, que permite comprimir los modelos hasta un 90%, …

    upv Repository record for Efficient Mixed-Precision Inference for Vision Transformers (opens in a new tab)

  5. An implementation of an AMPS digital base station with adaptive Automatic Gain Control

    … quantizer's Signal-to-Quantization Noise Ratio (SQNR) in a mean-square sense. Together, these techniques can be used to implement an adaptive Automatic Gain Control for cellular communications. Results from a comprehensive AMPS base station simulation will also be discussed in detail. These …

    vt Repository record for An implementation of an AMPS digital base station with adaptive Automatic Gain Control (opens in a new tab)

  6. Finite precision deep learning with theoretical guarantees

    … The signal-to-quantization-noise ratio (SQNR) of OCC is shown to be within 0.8 dB of the well-known optimal Lloyd-Max quantizer. OCC improves the SQNR of the commonly employed full range quantizer by 14 dB which translates to a 3 bit ADC precision reduction. The input-serial …

    uiuc Repository record for Finite precision deep learning with theoretical guarantees (opens in a new tab)

  7. Delta-Sigma Modulators with Low Oversampling Ratios

    … possesses signal-to-quantization noise ratio (SQNR) advantages over equivalent delta-sigma modulators at low OSRs. The final architecture is the time-interleaved incremental data converter where two designs are identified as potential methods of increasing the throughput of low OSR incremental …

    toronto-retro Repository record for Delta-Sigma Modulators with Low Oversampling Ratios (opens in a new tab)

  8. DAC Linearization Techniques for Sigma-delta Modulators

    … mismatch on the linearity performance (IM3 and SQNR) of a 4-bit current steering DAC is analyzed. A selective calibration technique is proposed that is aimed at reducing the area occupancy of conventional linearization circuits. A statistical element selection algorithm for linearizing DACs is …

    tamu Repository record for DAC Linearization Techniques for Sigma-delta Modulators (opens in a new tab)

  9. Performance of photonic oversampled analog-to-digital converters.

    … The signal-to-quantisation-noise ratio (SQNR) was calculated as a function input amplitude and a peak SQNR of 54dB was obtained for an oversampling ratio of 100.

    adelaide Repository record for Performance of photonic oversampled analog-to-digital converters. (opens in a new tab)

  10. Jitter Tolerant Hybrid Sigma-Delta Modulator

    … ADC achieves the maximum of 14 dB better SQNR than the conventional CT Σ∆ ADC at RMS jitter as high as 10% of the clock period. A negative resistor gain boosting single stage amplifier is also presented in this thesis.

    tamu Repository record for Jitter Tolerant Hybrid Sigma-Delta Modulator (opens in a new tab)

  11. A prototype of a new class of oversampling adc

    … Simulation results show it achieves 83.7-dB peak SQNR, 90-dB dynamic range over a 500kHz input signal bandwidth, and 60 mW power consumption.

    tamu Repository record for A prototype of a new class of oversampling adc (opens in a new tab)

  12. Phase noise and spur reduction in an array of direct digital synthesizers

    … output bits. This suggests that a near N gain in SQNR is possible for an N-channel array of DDSs. This gain will be most apparent for low-bit DACs in which quantization noise is notably higher than the thermal noise contribution. Lastly, the measurements of the correlation of quantizer …

    uiuc Repository record for Phase noise and spur reduction in an array of direct digital synthesizers (opens in a new tab)

  13. Low Noise, Jitter Tolerant Continuous-Time Sigma-Delta Modulator

    … improve the Signal to Quantization Noise Ratio (SQNR) of the modulator using a 7-bit embedded quantizer. An analog fast path feedback topology is proposed which uses an analog differentiator in order to compensate excess loop delay. This approach relaxes the requirements of the amplifier placed …

    tamu Repository record for Low Noise, Jitter Tolerant Continuous-Time Sigma-Delta Modulator (opens in a new tab)

  14. High Performance Integrated Circuit Blocks for High-IF Wideband Receivers

    … for best Signal‐to‐Quantization Noise Ratio (SQNR) performance is extracted via Least‐ Mean Squared (LMS) software‐based algorithm. Since the two tones are located outside the band of interest, the proposed global calibration approach can be used online with no significant effect on the …

    tamu Repository record for High Performance Integrated Circuit Blocks for High-IF Wideband Receivers (opens in a new tab)

  15. Energy-efficient data converter design in scaled CMOS technology

    … this TDΔΣ enables a CDC design, achieving 85-dB SQNR by having only a 4-bit quantizer, a 1st-order loop and a low OSR of 15. The prototype fabricated in 40-nm CMOS achieves a resolution of 0.29 fF while dissipating only 0.083 nJ per conversion, which improves the energy efficiency by greater than …

    texas Repository record for Energy-efficient data converter design in scaled CMOS technology (opens in a new tab)

  16. Design of a Highly Linear RF Front-End, a Low-Spur Fractional-N Frequency Synthesizer and a High-Speed, Low-Power Data Converter

    High-performance and low-power complementary metal-oxide-semiconductor (CMOS) circuit design techniques have been widely investigated both in industry and academia. For a 5G receiver, a wideband and linear RF front-end using minimal power is necessary. Meanwhile, a high-speed and low-power …

    tamu Repository record for Design of a Highly Linear RF Front-End, a Low-Spur Fractional-N Frequency Synthesizer and a High-Speed, Low-Power Data Converter (opens in a new tab)