Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Squeeze Flow"”.

  1. Squeeze Flow of Highly Concentrated Suspensions

    … normal stress distribution during constant-force squeeze flow of highly concentrated suspensions. Using pressure-sensitive films the normal stress distribution is measured in suspensions of glass spheres in a Newtonian liquid undergoing constant-force squeeze flow. At volume fractions of solids up …

    south-carolina Repository record for Squeeze Flow of Highly Concentrated Suspensions (opens in a new tab)

  2. The Design and Analysis of a Micro Squeeze Flow Rheometer

    … describes the analysis and design of a micro squeeze flow rheometer. The need to analyse the rheology of complex liquids occurs regularly in industry and during research. However, frequently the amount of fluid available is too small, precluding the use of conventional rheometers. Conventional …

    birmingham Download PDF for The Design and Analysis of a Micro Squeeze Flow Rheometer (opens in a new tab)

  3. Experimental Study of Liquid Squeeze-flow as it Relates to Human Voice Production

    … model was modified to incorporate the Newtonian squeeze-flow equation as a fluid model during the colliding portion of the oscillatory cycle. Results indicated that thicker films produced more significant deviations from the case with no fluid layer. Experimental testing was performed to validate …

    byu Repository record for Experimental Study of Liquid Squeeze-flow as it Relates to Human Voice Production (opens in a new tab) Download PDF for Experimental Study of Liquid Squeeze-flow as it Relates to Human Voice Production (opens in a new tab)

  4. Using Non-Lubricated Squeeze Flow to Obtain Empirical Parameters for Modeling the Injection Molding of Long-Fiber Composites

    … polypropylene during two homogeneous flows (startup of shear and planar extension) was compared. This comparison had not been performed in the literature previously, and revealed that fiber orientation is significantly faster during planar extension. This contradicts a long-held …

    vt Repository record for Using Non-Lubricated Squeeze Flow to Obtain Empirical Parameters for Modeling the Injection Molding of Long-Fiber Composites (opens in a new tab)

  5. Modeling Fiber Orientation using Empirical Parameters Obtained from Non-Lubricated Squeeze Flow for Injection Molded Long Carbon Fiber Reinforced Nylon 6,6

    … orientation. The properties and behavior of the flow of a fiber reinforced polymer composite during molding are directly related to the mechanical properties of the completed part. Flow affects the orientation of the fibers within the polymer matrix and at locations within the mold cavity. The …

    vt Repository record for Modeling Fiber Orientation using Empirical Parameters Obtained from Non-Lubricated Squeeze Flow for Injection Molded Long Carbon Fiber Reinforced Nylon 6,6 (opens in a new tab)

  6. Υπολογιστική ρεολογία και εφαρμογή της σε ροή πολυμερικών ρευστών

    … a software was developed for the simulation of flows (Newtonian, pseudoplastic, viscoplastic) in 2D Cartesian and axisymmetric geometries with the presence of free moving boundaries. The flow is considered laminar, incompressible or compressible, isothermal, steady-state or transient, and …

    greece Repository record for Υπολογιστική ρεολογία και εφαρμογή της σε ροή πολυμερικών ρευστών (opens in a new tab)

  7. A new approach to modeling drop-pair collisions : predicting the outcome through a fluidic-mechanical system analogy

    … The collision process is modeled by a squeeze-flow problem involving both planar and non-planar geometry, with attention given to the deformation of the interacting interfaces. Based on the nature of the collision process, an analogy is made between the fluidic systems of colliding …

    texas Repository record for A new approach to modeling drop-pair collisions : predicting the outcome through a fluidic-mechanical system analogy (opens in a new tab)

  8. Resin percolation and intimate contact in fast processing of thermoplastic composites

    … imaging and scaling analysis that percolation flow, rather than squeeze flow, of resin through fibers is the dominant mechanism to achieve intimate contact in rapid TPC processes such as automated fiber placement (AFP) and welding. A 1D intimate contact model based on resin percolation, derived …

    texas Repository record for Resin percolation and intimate contact in fast processing of thermoplastic composites (opens in a new tab)

  9. Influência dos parâmetros de forma do agregado na formulação de argamassas de projeção

    … das técnicas de reometria rotacional e de squeeze-flow além de teste de projeção. Após transcorrido pelo menos 28 dias de cura realizou-se a caracterização dos revestimentos através dos ensaios de resistência de aderência à tração e permeabilidade pelo método do cachimbo. Os resultados …

    brazil-ufrgs Repository record for Influência dos parâmetros de forma do agregado na formulação de argamassas de projeção (opens in a new tab)

  10. Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

    … were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it …

    brazil-ufrn Repository record for Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes (opens in a new tab)

  11. Fabrication of thermoplastic polymer composite ribbon

    … characterization and analyses revealed key flow mechanisms. Ribbon microstructure changes most at the bars. Ribbon macrostructure changes most at the nip. An isothermal bar contact is a practical processing constraint for ensuring uniform squeeze flow bar spreading. All bar drag force is …

    wm-mary Repository record for Fabrication of thermoplastic polymer composite ribbon (opens in a new tab)

  12. Análise da sinergia entre cimento, metacaulim e calcário na capacidade de impressão de argamassa LC3

    … Fluidity tests were carried out over time, squeeze-flow, specific mass in the fresh state, compressive strength of 14x19x19 cm blocks, compressive strength and flexural tensile strength of extruded and conventionally molded mortar prisms. In the end, it was found that the MK content can be …

    brazil-ufrn Repository record for Análise da sinergia entre cimento, metacaulim e calcário na capacidade de impressão de argamassa LC3 (opens in a new tab)

  13. Análise dos principais parâmetros que influenciam na área de contato substrato/argamassa de revestimento

    … em caracterizar diferentes argamassas através do squeeze-flow e reometria rotacional, verificar a influência da distribuição granulométrica nos parâmetros reológicos, verificar a influência da energia de aplicação no desenvolvimento da área de contato da interface argamassa/substrato e desenvolver …

    brazil-ufrgs Repository record for Análise dos principais parâmetros que influenciam na área de contato substrato/argamassa de revestimento (opens in a new tab)

  14. Thermomechanical Manufacturing of Polymer Microstructures and Nanostructures

    … the tool cavity. The precise nature of material flow during molding has long allowed fabrication of plastic components with sizes 1 mm 1 m. Polymer molding with precise critical dimension control could enable scalable, inexpensive production of micro- and nanostructures for functional or …

    gatech Repository record for Thermomechanical Manufacturing of Polymer Microstructures and Nanostructures (opens in a new tab)

  15. Μελέτη χρονομεταβαλλόμενων και ασταθών υπό συνθήκες ροών ιξωδοπλαστικών και ιξωδοελαστικών ρευστών

    … on time-dependent and conditionally unstable flows of viscoplastic and viscoelastic fluids because of their importance in various industrial processes. A typical experiment which is used widely for the rheological characterization of non-Newtonian fluids is squeeze flow which is the subject of …

    greece Repository record for Μελέτη χρονομεταβαλλόμενων και ασταθών υπό συνθήκες ροών ιξωδοπλαστικών και ιξωδοελαστικών ρευστών (opens in a new tab)

  16. Filler effects in resole adhesive formulations

    … lubrication approximation for the viscous force, squeeze flow of adhesives between two flat, impermeable steels and between steel and porous wood can be successfully modeled. However, deviations from theory were encountered as related to the method of adhesive application. Both meniscus force in …

    vt Repository record for Filler effects in resole adhesive formulations (opens in a new tab)

  17. Structure and properties of nano-confined main chain liquid crystalline polymers

    … and alignment by nano-confinement and the squeeze flow present during processing.

    texas Repository record for Structure and properties of nano-confined main chain liquid crystalline polymers (opens in a new tab)

  18. Estudo da influência da substituição parcial da areia natural pelo resíduo proveniente do corte de pedras ornamentais nas propriedades de argamassas para impressão 3D

    … tests of consistency index, infinite block, squeeze-flow, water absorption, specific mass, void ratio, compressive strength and flexural tensile strength were carried out. In addition, the physical and chemical characterization of RPPO was carried out through granulometry, X-ray …

    brazil-ufrn Repository record for Estudo da influência da substituição parcial da areia natural pelo resíduo proveniente do corte de pedras ornamentais nas propriedades de argamassas para impressão 3D (opens in a new tab)

  19. Processing and Characterization of Long Fiber Thermoplastics

    … also, to a large extent, by the process-induced flow orientation and fiber lengths. The orientations and fiber length are influenced significantly by the flow characteristics, processing method, and parameters. This work focuses on the rheological characterization of LFT processed via the …

    uab Repository record for Processing and Characterization of Long Fiber Thermoplastics (opens in a new tab)

  20. Desenvolvimento de compósitos para impressão 3D com consumo de cimento reduzido por meio de adições minerais

    … slump, bulk density, incorporated air content, squeeze-flow and buildability. In the hardened state, flexural strength, compressive strength, interlayer adhesion, specific mass, void index, and water absorption by immersion were analyzed. In general, the mixtures demonstrated compliance with the …

    brazil-ufrn Repository record for Desenvolvimento de compósitos para impressão 3D com consumo de cimento reduzido por meio de adições minerais (opens in a new tab)

Page 1 of 2