Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 358 for “"SrTiO3"”.

  1. Multifunctionality of SrTiO3 nanocubes

    … and energy storage. Strontium Titanate (SrTiO3) is a perovskite-type oxide that possesses unique physical and chemical properties such as thermal stability, superconductivity, high dielectric constant and good photocatalytic activity. These properties are highly dependent on the …

    unsw Repository record for Multifunctionality of SrTiO3 nanocubes (opens in a new tab)

  2. Nanoestruturas de SrTiO3, SrTiOxNy e SrTiO3±δ : síntese e caracterização para aplicação em conversão de energia

    … e o estudo das propriedades de nanopartículas de SrTiO3 sintetizadas por rota hidrotermal e solvotermal. Diferentes mecanismos de crescimento foram explorados com objetivo de se obter SrTiO3 com diferentes morfologias e para posterior dopagem e obtenção de estruturas do tipo SrTiOxNy e SrTiO3±δ. …

    brazil-ufrgs Repository record for Nanoestruturas de SrTiO3, SrTiOxNy e SrTiO3±δ : síntese e caracterização para aplicação em conversão de energia (opens in a new tab)

  3. A-Site Compensated Donor-Doped SrTiO3

    … of this thesis were to dope paraelectric SrTiO3 with niobium alongside an A-site vacancy compensation scheme so as to study the resulting chemical defects and potentially manipulate them in order to create a macroscopic dipole to induce a piezoelectric effect. However, it is made clear …

    whiterose Download PDF for A-Site Compensated Donor-Doped SrTiO3 (opens in a new tab)

  4. La doped SrTiO3 Based Oxide Thermoelectrics

    … properties of La-doped Sr3Ti2O7, Ca3Ti2O7 and SrTiO3 ceramics sintered in air and N2/5%H2 have been investigated. Different defect chemistry models were studied in an attempt to improve the thermoelectric performance of La-doped SrTiO3 and related systems. For La-doped Sr3Ti2O7 …

    whiterose Download PDF for La doped SrTiO3 Based Oxide Thermoelectrics (opens in a new tab)

  5. Physical Properties of LaAlO3/SrTiO3 Heterostructures

    The epitaxial thin films based on LaAlO3(LAO)/SrTiO3(STO) were prepared by laser molecular beam epitaxy (LMBE). The thickness dependence of magnetic properties of LAO/STO heterostructures was systematically studied. As the LAO layer became thicker, the blocking temperature of the spin-glass-like …

    unsw Repository record for Physical Properties of LaAlO3/SrTiO3 Heterostructures (opens in a new tab)

  6. Scanning tunnelling microscopy of epitaxial nanomaterials on SrTiO3

    … on the study of epitaxial nanomaterials grown on SrTiO3 substrates including their morphologies, their epitaxial relationship, the energetics of equilibrium crystals and the interactions with the substrates. </p> <p>The formation of ordered TiO<sub>x</sub>-rich dilines on the …

    oxford Repository record for Scanning tunnelling microscopy of epitaxial nanomaterials on SrTiO3 (opens in a new tab)

  7. SrTiO3 unter Einfluss von Temperatur und elektrischem Feld

    … Realstruktur des perowskitischen Modellsystems SrTiO3, welches in der Raumgruppe Pm-3m kristallisiert, wird durch die Sauerstoffvakanz als wichtigstem Defekt dominiert. Durch Temperaturbehandlung unter reduzierenden Bedingungen können Sauerstoffvakanzen in die Kristallstruktur eingebracht …

    qucosa-diss

  8. Influência da rota de síntese nas propriedades do SrTiO3

    … Neste trabalho o óxido do tipo perovskita SrTiO3 foi sintetizado através de quatro rotas e as propriedades dos materiais foram comparadas para compreender como a síntese pode influenciar as propriedades do material obtido. As rotas de síntese avaliadas são: i) complexação polimérica (método …

    brazil-ufrgs Repository record for Influência da rota de síntese nas propriedades do SrTiO3 (opens in a new tab)

  9. Improving the photodegradation of dyes with SrTiO3-modified nanoparticles

    … systems based on the modification of commercial SrTiO3 nanoparticles were used. In the first part of the work, SrTiO3 and Ni nanoparticles (synthesized from NiCl2.6H2O precursor) were characterized by X-Ray Diffraction (XRD), Small-Angle X-Ray Scattering (SAXS) and Transmission Electron …

    brazil-ufrgs Repository record for Improving the photodegradation of dyes with SrTiO3-modified nanoparticles (opens in a new tab)

  10. HIGH-RESOLUTION CHARACTERZATION OF LOW-DIMENSIONAL DEFECTS IN SrTiO3

    <p>Strontium titanate (SrTiO<sub>3</sub>) has a wide range of applications in the electronic industry and attracts growing world-widely interest recently because of novel discoveries at its surfaces, interfaces and with selected dopants. The understanding of some of the structural properties of …

    mcmaster Repository record for HIGH-RESOLUTION CHARACTERZATION OF LOW-DIMENSIONAL DEFECTS IN SrTiO3 (opens in a new tab)

  11. Growth Characterization of RF Magnetron Sputtered BiFeO3 on Epitaxial SrTiO3

    … films by RF magnetron sputtering on epitaxial SrTiO3/Si substrate grown at Texas State University-San Marcos. The resulting polycrystalline thin films, ranging from ~ 100 to 600 nm, were characterized by x-ray diffraction for crystallinity and EDS for film composition. We also measured the …

    texas-state Repository record for Growth Characterization of RF Magnetron Sputtered BiFeO3 on Epitaxial SrTiO3 (opens in a new tab)

  12. Mechanisms for oxygen vacancy defect migration in SrTiO3/NiO heterostructures

    … case in rock salt-perovskite interfaces too. In SrTiO3/NiO heterostructures, to comprehend interface ionic transport, we investigate oxygen vacancy migration near misfit dislocations. To this end, we developed a high-throughput framework that integrates atomistic simulations with nudged elastic …

    rit Repository record for Mechanisms for oxygen vacancy defect migration in SrTiO3/NiO heterostructures (opens in a new tab)

  13. Scanning tunneling microscopy of Ni and Fe nanocrystals on SrTiO3

    … were subjected to various thermal cycles. SrTiO3 is capable of producing a multitude of surface reconstructions such as (2 × 1), (2 × 2), (√5 × √5) R26.6°, and c(4 × 2) on (001) termination; (4 × 1) on (110) termination; and (4 × 4) and (6 × 6) on (111) termination. On SrTiO<sub>3</sub> …

    oxford Repository record for Scanning tunneling microscopy of Ni and Fe nanocrystals on SrTiO3 (opens in a new tab)

  14. Defect Engineering of SrTiO3 thin films for resistive switching applications

    … in the thin film oxide. Within this work, SrTiO3 was used as an oxide model material and was deposited by pulsed laser deposition (PLD) onto doped and undoped SrTiO3 single crystals to investigate the formation of defects as a function of the process parameters. By combining structural and …

    cau-kiel Repository record for Defect Engineering of SrTiO3 thin films for resistive switching applications (opens in a new tab)

  15. Conversion of silica diatom frustules to BaTiO3, SrTiO3, and Nb2O5

    … at 1200C or Sr(OH)2 at 1600C to form BaTiO3 or SrTiO3 respectively. Chemical composition, structure, and morphology of the converted frustules were studied by XRD, TEM, SEM, EDS. In both cases near complete conversion was achieved while retaining the morphology of the original silica frustules. …

    iastate Repository record for Conversion of silica diatom frustules to BaTiO3, SrTiO3, and Nb2O5 (opens in a new tab)

  16. Study of LaAlO3/SrTiO3 2DEG for X-ray Sensor Applications

    The LaAlO3/SrTiO3 (LAO/STO) heterostructure has attracted significant attention due to the formation of a two-dimensional electron gas (2DEG) at its interface, exhibiting high mobility and tunable electronic properties. This thesis explores the potential of such an interface for X-ray sensor …

    unsw Repository record for Study of LaAlO3/SrTiO3 2DEG for X-ray Sensor Applications (opens in a new tab)

  17. The design of a reflectance spectrometer and its calibration using SrTiO3 /

    A new Ultra-High Vacuum (UHV) reflectance spectrometer was successfully designed, making use of a Janis Industries ST-400 sample cryostat, IR Labs bolometer, and Briiker IFS 66 v/S spectrometer. Two of the noteworthy features include an in situ gold evaporator and internal reference path, both of …

    brock Repository record for The design of a reflectance spectrometer and its calibration using SrTiO3 / (opens in a new tab)

Page 1 of 18