Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Stabilizer Concentration"”.
-
Indirect Tensile Strength of Clayey Soils Treated with Cement or Lime
… indirect tensile strength (ITS) test results to stabilizer type, stabilizer concentration, and curing time for multiple clayey soils with varying plasticity indices (PIs), identify cases in which an ITS of 30 psi can be obtained, and create a general linear model that predicts ITS. The scope of …
-
An Experimental Study on the Mechanical Properties and Chemical Composition of LCD 3D Printed Specimens
… the overall prints by LCD/SLA printing. Oxygen Concentration, Oligomer Concentration, Stabilizer Concentration, and Exposure Time were the parameters chosen to run these experiments, each having 3 different levels to be tested with. ASTM standard specimens were used to provide parts for 3 …
-
A New Environmentally Friendly AL/ZR-Based Clay Stabilizer
Clay stabilizers are means to prevent fines migration and clay swelling, which are caused by the contact of formation with low salinity or high pH brines at high temperature. Previous clay stabilizers including: Al and Zr compounds and cationic polymers have several drawbacks. Al and Zr compounds …
-
Application of a Novel Clay Stabilizer to Mitigate Formation Damage due to Clay Swelling
… of a cationic inorganic Al/Zr-based polymer clay stabilizer to prevent swelling of smectite particles in a sandstone matrix. Previous work has focused on mitigating fines migration; swelling mitigation is tested here. Berea sandstone cores were injected with a montmorillonite slurry to supplement …
-
Use of tailored hydrodynamic conditions to control reactions for AgNPs synthesis in microfluidic devices
… Key factors affecting particle size, such as pH, stabilizer concentration, and reactor outlet curvature, were identified. However, limitations due to the complexity of the multi-step reaction scheme were noted, with response surface models being effective only within specific operating ranges and …
-
Amphiphilic Diblock Copolymers as Stabilizers in Emulsion Polymerization
… prevent phase separation. Incorporation of these stabilizers in the final polymer may have negative effects on product properties, so the design of new stabilizers is worthwhile. Amphiphilic diblock copolymers are a promising type of emulsion polymerization stabilizer and are the focus of this …
-
Metal Complex Photo-activators for the Time-Controlled, Photo-Oxidation of Polyolefins
… e.g., iron acetylacetonate (FAcAc)) and U.V. stabilizer, has been examined in both low-density polyethylene (LDPE) and polypropylene (PP). The U.V. stabilizers used were zinc and nickel diethyldithiocarbamates (ZDEC and NDEC), tetraethylthiuram disulphide (TETD), and …
-
An Investigation into Formulation and Therapeutic Effectiveness of Nanoparticle Drug Delivery for Select Pharmaceutical Agents
… and entrapment efficiency. Effects of stabilizer type, stabilizer concentration, centrifugal force, drug amount, and/or emulsifier (lecithin) on nanoparticle characterization were examined for formula optimization. Results of the formulation studies showed that NPs developed using …
-
Highly supersaturated aqueous solutions by design of amorphous pharmaceutical nanoparticles
… nm amorphous nanoparticle dispersions. Polymeric stabilizers increased the nucleation rate by lowering the interfacial tension and adsorbed to particle surfaces to inhibit growth by condensation and coagulation. An increase in the stabilizer concentration decreased the average particle size until …
-
Swellable polymer substrates for use in magnetochemical and optical chemical sensing
… included cross-linker type, cross-linker concentration, DMAEMA concentration and comonomer hydrophilicity.Polymer microspheres were prepared using dispersion polymerization and seeded emulsion polymerization techniques. Poly-(vinyl benzyl chloride-co-2,4,5-trichloro phenyl …
-
Preparation and characterization of derivatized microparticles immobilized in hydrogel membranes for optical chemical sensing based on polymer swelling
… The particles swell in response to hydrogen ion concentration, causing them to reflect less light. Therefore, the membrane reflects light as a function of pH.There are many factors that control poly(VBC) particle size and distribution using dispersion polymerization. The factors that influence …
-
Pharmacokinetics and efficacy of a tunable curcumin-loaded polymeric nanoparticle for neonatal neuroprotection
… formulated using different surfactants as stabilizers, and investigated the effects of surfactants on PK profiles and biodistribution of polymeric nanoparticles in the term-equivalent rat. Our results show that the PK and biodistribution of polymeric nanoparticles can be adjusted by …
-
FACTORS INFLUENCING THE ICE RECRYSTALLIZATION INHIBITION EFFECTS OF CELLULOSE NANOCRYSTALS IN MODEL ICE CREAM
… Currently, food polysaccharides are used as stabilizers to inhibit ice recrystallization. However, their ice recrystallization inhibition (IRI) effects depend on measurement conditions and opposing results have been reported in literature. In this work, cellulose nanocrystals (CNCs), newly …
-
Frost Heave of Clayey Soils Treated with Cement or Lime
… cement and lime at low, medium, and high concentrations on the frost-heave susceptibility of multiple clayey soils with varying plasticity indices. The scope of work included laboratory frost-heave testing of three clayey soils sampled from Monticello, Utah; Bloomington, Indiana; and San …
-
Evaluation of Laboratory Durability Tests for Stabilized Aggregate Base Materials
… involved two granular base materials, three stabilizers at three concentration levels each, and three durability tests in a full-factorial experimental design. The granular base materials consisted of an aggregate-reclaimed asphalt pavement blend obtained from Interstate 84 (I-84) and a …
-
Tailoring Siloxane Functionality for Lithography-based 3D Printing
… of laurolactam in the presence of a steric stabilizer and initiator yielded PA12 microparticles with high sphericity directly from the polymerization without significant post-processing requirements. Steric stabilizer concentration and stirring rate remained the most important variables for …