Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Stack Pressure"”.
-
Effects of Stack Pressure on High Performance Lithium-Ion Batteries
… works have shown that applying mechanical pressure to the through-plane surface of pouch cells can have both beneficial and detrimental effects on cell perfor- mance and lifetime. Despite this, there is little work exploring the implications of this performance difference when discussing …
-
Cycling of solid-state lithium-ion batteries with high-loading cathodes at low stack pressure
Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2026-12-01
-
Separator structure and stack pressure effects on zinc metal anode stability for aqueous zinc-ion batteries
The full abstract for this thesis is available in the body of the thesis, and will be available when the embargo expires.
-
Performance of multiple, angled nozzles with short mixing stack eductor systems
… to evaluate the feasibility of reducing mixing stack lengths by the application of angled primary flow nozzles. Three short mixture stacks with length to diameter ratios of 1.73, 1.5, and 1.25 were tested using a set of straight nozzles and a series of angled nozzles having tilt angles of 10, …
-
Power Estimation for High-Performance Lithium-Ion Batteries
… investigates the influence of SOC, temperature, stack pressure, and load history on power deliver. The challenge is that the experiments employ high-power pulses to measure the impact of each factor, which might introduce errors due to accelerated degradation. This thesis addresses this challenge …
-
DETERMINATION OF METHODS TO EFFECTIVELY STUDY INTERFACES IN SODIUM SOLID STATE BATTERIES
… but we have determined that the application of stack pressure allows for increased cyclability in all solid-state cells. Further, it is of utmost importance to achieve a pristine interface through heat treatment and polishing procedures. Data found in the literature is difficult to compare; …
-
Diurnal and seasonal predictability of envelope pressures driving natural infiltration in residential buildings
… the dynamics of residential building envelope pressures by predicting and comparing time series site-specific weather conditions at minute-level resolution. Utilizing theoretically established relationships of both stack and wind effects, this research examines the predictability and accuracy …
-
Characteristics of a fluted nozzle gas eductor system
… area. The four nozzle tests used a mixing stack length-to-diameter ratio, (L/D), 1.5; the single nozzle tests used L/D ratios of2.0, 1.75, and 1.5. The total cross sectional area of the mixing stack was 2/3; for the single fluted nozzle, 2.42. Secondary pumping coefficients, mixing stack …
-
Challenges and Innovations for Manufacturing and Operating Solid-state Batteries
… been investigated. Third, the origins of high stack pressure requirements are carefully examined for halide-based SSBs. Finally, the future directions and opportunities are presented. This thesis provides a comprehensive understanding of the material, mechanical, and manufacturing barriers that …
-
Exploring Ion Dynamics in Solid-State Electrolytes of Lithium- and Sodium-Ion Batteries through Solid-State Nuclear Magnetic Resonance
… upon structural modifications. Additionally, pressure-treated crystalline electrolytes were analyzed with diffusometry and relaxometry, to explore how mechanical stress impacts ion transport as a result of micromorphological changes of the crystalline materials. Furthermore, with the …
-
Characteristics of a four-nozzle, slotted short mixing stack with shroud, gas eductor system
… performance utilizing a short slotted missing stack and two shrouds with diffuser rings. The stack length-to-diameter ratio, (L/D), was 1.0, and with the shroud and diffuser rings extended to L/D to 1.5. The difference in the two shrouds was the separation distance between stack and shroud and …
-
Operando characterisations of all-solid-state batteries
… analysed, and with the effects from stack pressure and cycling temperature determined.</p> <p>Chapter 4 explores the solid electrolyte cracking and dendrite formation as a response to Li plating towards the Li metal anode. The spallation is observed as a way of cracking in solid …
-
An investigation of transition metal and oxygen redox in lithium-rich cathode materials
… cell, capable of applying significant stack pressure, was built to investigate layered lithium-rich materials. It is used to study Li<sub>1.2</sub>Ni<sub>0.13</sub>Co<sub>0.13</sub>Mn<sub>0.54</sub>O<sub>2</sub> and Li<sub>1.2</sub>Ni<sub>0.2</sub>Mn<sub>0.6</sub>O<sub>2</sub> using …
-
Interfaces between metal anodes and solid electrolytes in solid-state batteries
… to previous work on Li anodes, with lower stack-pressures required to suppress voiding, due to its greater propensity to creep under pressure.</p> <p>Chapter 4 describes investigation of the temperature dependence of voiding at the Li anode/solid electrolyte interface, finding that …
-
Influence of topography at the lithium metal/solid electrolyte interface in all-solid-state batteries
… kinetics of lithium deposition and flow-induced pressure distributions across the interface, and linking these distributions to a dendrite growth model, the study rationalises how the critical current density of plating varies with the topography of the contoured Li/electrolyte interfaces. …
-
The redox chemistry of sulfur in cathode materials for rechargeable Li-ion batteries
… capacity retention over 200 cycles under a low stack pressure of 2 MPa. This excellent performance highlights the promise of Li-rich sulfides as cathodes for ASSBs, beyond conventional high-voltage oxides.<br><br>Finally, S-redox materials Li1.2Mn0.2Ti0.6S2 and Li1.2Ti0.8S2 are studied in …
-
Microstructure Engineering of All-Solid-State Composite Electrodes
… solid electrolyte enables operation under low stack pressure. Second, we examine the physical properties of lithium-containing organic materials, revealing that the reduced form of organic material exhibits improved chemical stability when combined with sulfide electrolyte. This highly …
-
Diagnosis of the effects of thermal cycling on PEMFCS via electrochemical impedance spectroscopy
… no irrecoverable damage recorded at moderate stack pressures of 120 PSI and degradation rates below 0.057mV/cycle at increased stack pressure of 350 PSI. These results suggest that stack sealing pressure is a factor in thermal degradation and is an avenue for continued investigation. …
-
Strategies for Consistent Alignment of Next-Generation Battery Electrochemical Data with Physics-Based Models
… a temperature range of –20 ˚C to 150 C and cell stack pressure from 2-200 MPa. Cumulatively, the efforts to consistently align electrochemical data and physics-based models of next-generation batteries work towards generating robust quantitative physicochemical descriptors for data-driven …
-
High-energy solid-state batteries based on lithium hydridoborate electrolytes
… composite electrodes, lowering the high stack pressure requirement of silicon electrodes from 50 to 8 MPa.<br>Finally, a dry-processing route with a binder free of per- and polyfluoroalkyl substances (PFAS) is developed to fabricate electrodes. In addition, thin (100 m) hydridoborate …
Page 1 of 2