Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 442 for “"Stainless steels"”.

  1. Formability of austenitic stainless steels

    Includes bibliographical references (pages 170-176).

    colo-mines Repository record for Formability of austenitic stainless steels (opens in a new tab)

  2. Pit initiation on austenitic stainless steels

    … early stages of growth of pitting corrosion on stainless steels in dilute chloride solution are described. Electrochemical techniques have been used to detect and follow the evolution of anodic current transients which occur at the nano-amp level prior to the onset of sustained pitting. These …

    soton Download PDF for Pit initiation on austenitic stainless steels (opens in a new tab)

  3. Atmospheric corrosion of austenitic stainless steels

    … propagation and repassivation of 304L and 316L stainless steels were investigated using \(in\) \(situ\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate …

    birmingham Download PDF for Atmospheric corrosion of austenitic stainless steels (opens in a new tab)

  4. Impact fracture of embrittled stainless steels

    Hydrogen embrittlement of austenitic stainless steels and temper embrittlement of a martensitic stainless steel have been studied by impact testing, metallography, and SEM fractography. New data for uncharged and hydrogen-charged specimens of Types 304L and 316L austenitic stainless steels show …

    vt Repository record for Impact fracture of embrittled stainless steels (opens in a new tab)

  5. Impact fracture of austenitic stainless steels

    … material selection is imperative. Austenitic stainless steels may be a likely choice for hydrogen service because their behavior in high pressure hydrogen ranges from no apparent damage to relevant, but generally small ductility loss (13). Because of this Variation in behavior, a single …

    vt Repository record for Impact fracture of austenitic stainless steels (opens in a new tab)

  6. Localised Corrosion of Austenitic Stainless Steels

    … behaviour of various grades of Austenitic Stainless Steels has been demonstrated by optical and electron microscopy. The effect of sensitisation upon subsequent corrosive attack has been investigated. A theoretical model based upon thermodynamic and kinetic considerations has been proposed …

    mcmaster Repository record for Localised Corrosion of Austenitic Stainless Steels (opens in a new tab)

  7. Weldability of nuclear grade austenitic stainless steels

    … 3) Evaluation of nuclear grade austenitic stainless steels by the Gleeble hot ductility and Varestraint hot cracking methods. 4) The technique correlations between four hot cracking test methods.</p> <p>The hot ductility test standardization was undertaken in order to provide comparable …

    ut-knoxville Repository record for Weldability of nuclear grade austenitic stainless steels (opens in a new tab)

  8. Study of Alumina in Austenitic Stainless Steels

    … performance in alumina forming austenitic stainless steel. Alumina forming austenitic stainless steel consists of a typical microstructure of austenitic stainless steels, austenitic matrix, with a key exception of an alumina oxide formation on the outer most layer of the alloy. The …

    tamu Repository record for Study of Alumina in Austenitic Stainless Steels (opens in a new tab)

  9. Phase transformations in cast duplex stainless steels

    <p>Duplex stainless steels (DSS) constitute both ferrite and austenite as a matrix. Such a microstructure confers a high corrosion resistance with favorable mechanical properties. However, intermetallic phases such as sigma (sigma) and chi (chi) can also form during casting or high-temperature …

    iastate Repository record for Phase transformations in cast duplex stainless steels (opens in a new tab)

  10. Stress corrosion cracking of austenitic stainless steels

    … behavior of metastable and stable austenitic stainless steels, constant elongation rate tests (CERT) and sub-critical crack growth (SCG) tests were used to measure the susceptibility and cracking rate. The tests were performed in H$\sb2$SO$\sb4$/NaCl solutions in the pH ranges from 0 to 7 and …

    uiuc Repository record for Stress corrosion cracking of austenitic stainless steels (opens in a new tab)

  11. AUSTENITIC STAINLESS STEELS FOR FUTURE NUCLEAR FUEL CLADDINGS

    … the behavior of two existing nuclear materials, stainless steels 310S and 316L was investigated, under conditions approximating the nuclear reactor environment. An environment with dynamic loop of supercritical water (SCW) was used to test the performance of the alloys and the oxides formed were …

    sask Repository record for AUSTENITIC STAINLESS STEELS FOR FUTURE NUCLEAR FUEL CLADDINGS (opens in a new tab)

  12. AUSTENITIC STAINLESS STEELS FOR FUTURE NUCLEAR FUEL CLADDINGS

    … the behavior of two existing nuclear materials, stainless steels 310S and 316L was investigated, under conditions approximating the nuclear reactor environment. An environment with dynamic loop of supercritical water (SCW) was used to test the performance of the alloys and the oxides formed were …

    sask Repository record for AUSTENITIC STAINLESS STEELS FOR FUTURE NUCLEAR FUEL CLADDINGS (opens in a new tab)

  13. AUSTENITIC STAINLESS STEELS FOR FUTURE NUCLEAR FUEL CLADDINGS

    … the behavior of two existing nuclear materials, stainless steels 310S and 316L was investigated, under conditions approximating the nuclear reactor environment. An environment with dynamic loop of supercritical water (SCW) was used to test the performance of the alloys and the oxides formed were …

    sask Repository record for AUSTENITIC STAINLESS STEELS FOR FUTURE NUCLEAR FUEL CLADDINGS (opens in a new tab)

  14. The Compatibility of Tellurium with Austenitic Stainless Steels

    … shown (67, 68) to have a corrosive effect on stainless steels that are potential fuel cladding materials. In the present research the effects of tellurium on a particular alloy, namely an A.I.S.I. 316L austenitic stainless steel were studied at temperature of 650°C and 750°C. Liquid tellurium …

    aston Download PDF for The Compatibility of Tellurium with Austenitic Stainless Steels (opens in a new tab)

  15. The breakdown of stainless steels in strong acids

    … acid tests, of two commercial AISI type 304L steels in the as received condition and after various heat treatments. Optical microscopy and SEM, TEM and STEM in conjunction with energy dispersive x-ray analysis, were used to correlate the corrosion behaviour of these steels with their …

    aston Download PDF for The breakdown of stainless steels in strong acids (opens in a new tab)

  16. Recovery, recrystallisation and formability of ferritic stainless steels.

    … have been investigated in 17% and 25% Cr steels after 35%, 50% and 75% reduction.In general additions of molybdenum retarded recovery at both chromium and interstitial levels, while additions of titanium increased the rate of recovery. Additions of niobium increased the rate of recovery at …

    sheffield-hallam Download PDF for Recovery, recrystallisation and formability of ferritic stainless steels. (opens in a new tab)

  17. Deformation Induced Martensitic Transformation In 304 Stainless Steels

    304 stainless steel is an austenitic steel widely used for various applications due to a good combination of strength and ductility and relative low cost. It is known to be metastable as the austenite phase can transform into martensite under stress. In this work, a new method (in-situ tensile TEM) …

    south-carolina Repository record for Deformation Induced Martensitic Transformation In 304 Stainless Steels (opens in a new tab)

Page 1 of 23