Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 3689 for “"Stainless."”.

  1. History and development of stainless steel and stainless iron

    Thesis (M.B.A.)--Boston University, 1934. This item was digitized by the Internet Archive.

    bu Repository record for History and development of stainless steel and stainless iron (opens in a new tab)

  2. Interaction of stainless steel threaded fasteners with stainless steel locking inserts

    The interaction of stainless steel threaded fasteners with stainless steel locking inserts was investigated with special emphasis on high-vacuum environment applications. Nondestructive and destructive test methods were used in conjunction with information gathered from investigation with a …

    vt Repository record for Interaction of stainless steel threaded fasteners with stainless steel locking inserts (opens in a new tab)

  3. Stainless Clad Steels:An Evaluation

    This work examines and evaluates stainless clad sheet steel. The history of clad materials is examined to put a following section on marketing in perspective. A section on marketing sees clad steels in competition with conventional stainless steel and coated mild steels, Following this a …

    aston Download PDF for Stainless Clad Steels:An Evaluation (opens in a new tab)

  4. Nitriding of Austenitic Stainless Steel

    Stainless steel is a difficult material to nitride because a passive oxide film is present on its surface. Hence it is essential to remove this film by chemical or mechanical means before any surface treatment can be carried out. This increases the cost of the treatment substantially. The commonly …

    aston Repository record for Nitriding of Austenitic Stainless Steel (opens in a new tab) Download PDF for Nitriding of Austenitic Stainless Steel (opens in a new tab)

  5. High-Temperature Austenitic Stainless Steel

    … or ductility. To this end, conventional 316 stainless steels were thermo-mechanically processed to create a high volume fraction of deformation twins in an austenite matrix with low dislocation density. The deformation twins were found to be thermally stable up to 800 °C, and in some case, …

    tamu Repository record for High-Temperature Austenitic Stainless Steel (opens in a new tab)

  6. Formability of austenitic stainless steels

    Includes bibliographical references (pages 170-176).

    colo-mines Repository record for Formability of austenitic stainless steels (opens in a new tab)

  7. Corrosion of Austenitic Stainless Steel

    … focuses on the corrosion behaviour of austenitic stainless steel welds in chloride containing environments. The initial aim was to develop a new method for corrosion testing of welded austenitic stainless steel. The motivation for such work was that previous results indicated that the current …

    chalmers Repository record for Corrosion of Austenitic Stainless Steel (opens in a new tab)

  8. Machinability of stainless steel alloys

    … AISI 304L Austenitic and AISI 410 Martensitic Stainless Steel with focus on the influence of different parameters such as cutting speed, feed rate and depth of cut on the surface roughness, cutting forces, burr formation and chip formation. A great emphasis is put on the materials interactions …

    ets-quebec Download PDF for Machinability of stainless steel alloys (opens in a new tab)

  9. Pit initiation on austenitic stainless steels

    … early stages of growth of pitting corrosion on stainless steels in dilute chloride solution are described. Electrochemical techniques have been used to detect and follow the evolution of anodic current transients which occur at the nano-amp level prior to the onset of sustained pitting. These …

    soton Download PDF for Pit initiation on austenitic stainless steels (opens in a new tab)

  10. Atmospheric corrosion of austenitic stainless steels

    … propagation and repassivation of 304L and 316L stainless steels were investigated using \(in\) \(situ\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate …

    birmingham Download PDF for Atmospheric corrosion of austenitic stainless steels (opens in a new tab)

  11. Atmospheric pitting corrosion of stainless steel

    Atmospheric pitting corrosion of austenitic stainless steels 304L and 316L under droplets of MgCl2 have been studied under conditions of relevance to long-term storage of nuclear waste containers using automated deposition of arrays of droplets. The effect of microstructure on the morphology of …

    birmingham Download PDF for Atmospheric pitting corrosion of stainless steel (opens in a new tab)

  12. Corrosion studies of stainless steel blades

    … their excellent properties, martensitic stainless steels have, over recent decades, become one of the alloys that are increasingly used in blade manufacturing industry. Architects often design stainless steel exterior elements with higher polished surface, which are resistant to corrosion …

    njit Repository record for Corrosion studies of stainless steel blades (opens in a new tab)

  13. ADDITIVE MANUFACTURING OF STAINLESS-STEEL NANOCOMPOSITES

    Additive manufacturing of stainless-steel nanocomposites is one potential method for creating hydrophobic metallic surfaces to mitigate corrosion. Laser powder bed fusion (LPBF) is a 3-D printing method utilized to print metallic components including 316L stainless-steel (SS). LPBF was used to …

    nps Repository record for ADDITIVE MANUFACTURING OF STAINLESS-STEEL NANOCOMPOSITES (opens in a new tab)

  14. Axially loaded stainless steel compression members

    … advances in steel fabrication technologies, stainless steel has risen as a valuable alternative to regular carbon steel for heavy structural elements in addition to the traditional light gage structural elements of common use. The objective of this investigation is to summarize the existing …

    gatech Repository record for Axially loaded stainless steel compression members (opens in a new tab)

  15. Impact fracture of embrittled stainless steels

    Hydrogen embrittlement of austenitic stainless steels and temper embrittlement of a martensitic stainless steel have been studied by impact testing, metallography, and SEM fractography. New data for uncharged and hydrogen-charged specimens of Types 304L and 316L austenitic stainless steels show …

    vt Repository record for Impact fracture of embrittled stainless steels (opens in a new tab)

  16. Impact fracture of austenitic stainless steels

    … material selection is imperative. Austenitic stainless steels may be a likely choice for hydrogen service because their behavior in high pressure hydrogen ranges from no apparent damage to relevant, but generally small ductility loss (13). Because of this Variation in behavior, a single …

    vt Repository record for Impact fracture of austenitic stainless steels (opens in a new tab)

  17. Localised Corrosion of Austenitic Stainless Steels

    … behaviour of various grades of Austenitic Stainless Steels has been demonstrated by optical and electron microscopy. The effect of sensitisation upon subsequent corrosive attack has been investigated. A theoretical model based upon thermodynamic and kinetic considerations has been proposed …

    mcmaster Repository record for Localised Corrosion of Austenitic Stainless Steels (opens in a new tab)

  18. Weldability of nuclear grade austenitic stainless steels

    … 3) Evaluation of nuclear grade austenitic stainless steels by the Gleeble hot ductility and Varestraint hot cracking methods. 4) The technique correlations between four hot cracking test methods.</p> <p>The hot ductility test standardization was undertaken in order to provide comparable …

    ut-knoxville Repository record for Weldability of nuclear grade austenitic stainless steels (opens in a new tab)

Page 1 of 185