Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Stall Control"”.
-
Dynamic Stall Control Using Synthetic Jets
Dynamic stall is an unsteady flow phenomenon that occurs on helicopter and wind turbine rotor blades when rapidly pitched beyond their corresponding static stall angle. It is characterised by formation of large vortices that initially increase lift but then induce strong and potentially damaging …
-
Stall Control of a NACA0015 Aerofoil at Low Reynolds Numbers
This thesis focuses on experiments for stall control by using boundary layer trips on a NACA0015 aerofoil wing at low Reynolds numbers. Some simulation for a 2D aerofoil simulation was studied. The NACA0015 aerofoil simulation with different numbers of node and turbulence models at an angle of …
-
Anisotropic hybrid turbulence modeling with specific application to the simulation of pulse-actuated dynamic stall control
… studies have shown pulse actuated dynamic stall control may provide a simple means to significantly increase the performance of lifting surfaces and expand their flight envelope. However, precise information of the complex boundary layer reattachment mechanisms are inaccessible to …
-
Retreating blade stall control on a NACA 0015 aerofoil by means of a trailing edge flap
… a mechanism for alleviating retreating blade stall. In the present investigation numerical simulations were conducted involving a NACA 0015 aerofoil section fitted with a plain trailing edge (TE) flap. All simulations were conducted using DIVEX, a tool being developed at the University of …
-
COMPUTATIONAL ANALYSIS OF THE AEROELASTIC DYNAMICS OF A WIND TURBINE BLADE WITH VARIABLE-SPEED STALL CONTROL
… Wind Turbine, an alternative fixed-speed stall-controlled blade design proposed by Delft University, and a novel alternative design that we proposed for a variable-speed stall-controlled turbine, which offers the potential for more uniform power control and improved annual energy …
-
Development And Parameter Refinement Of A Dynamic Simulation Model Of A Fixed Speed Stall Control Wind Turbine Under Start-Up Conditions
In this study, the dynamics of a fixed speed stall controlled 900 kW wind turbine connected to a 12.5 kV distribution line were modeled and verified with existing field data under start up conditions. Model components include the wind, the turbine rotor and generator, soft-start power electronics …
-
Design and Analysis of a Small-Scale Wind Energy Conversion System
… prototype to be used for testing different control strategies applied to small scale WECSs. Novel control algorithms will be proposed to the WECS and will be verified experimentally in details. The wind turbine aerodynamics are presented and mathematical modeling is derived which is used …
-
A vorticity-based criterion for dynamic stall onset
Dynamic stall refers to the unsteady stall phenomenon observed over aerodynamic surfaces that experience large-amplitude, transient motion or inflow variations that increase the angle of attack beyond the static stall value. The nonlinear variation in aerodynamic forces and moments, severe …
-
Aerodynamic design optimization and flow separation control of the UAS-S45 using wing morphing technology
… performed at the Research Laboratory in Active Controls, Avionics, and AeroServoElasticity (LARCASE). This includes an optimization framework, which combines an optimization algorithm, airfoil parameterization techniques, and an aerodynamic solver. To obtain the optimized wing shapes, different …
-
Investigation into power distribution _grid interfacing for subsea tidal generation - Rectification to a common DC-bus
… grid connection methodology for a practical installation. Current tidal steam prototype designs utilise variable speed gear boxes, power frequency converters and variable pitch blades in the nacelle, thus requiring complicated, heavy and expensive equipment in the nacelle. Moreover the variable …
-
Investigation of increased forward flight velocities of helicopters using second harmonic control and reverse velocity rotor concept
… of a rotorcraft equipped with Higher Harmonic Stall Control (HHSC) and a Reverse Velocity Rotor (RVR). Current rotorcraft are limited in forward flight speed by retreating blade stall and compressibility effects on the advancing blade. Stall occurs as the blade encounters increasingly severe …
-
The Dynamics of Stall and Surge Behavior in Axial-Centrifugal Compressors
The phenomena of stall and surge in axial-centrifugal compressors is investigated through high-response measurements of both the pressure field and the flowfield throughout the surge cycle. A unique high-response forward-facing and aft-facing probe provides flow information. Several …
-
Axial Compressor Design with Counter-Rotation and Variable RPM for Stall Mitigation
Compressor Stall, an aerodynamic instability due to abnormal air flow in the compressor resulting in loss of total pressure and compressor performance. One of the reasons of compressor stall is due to rise in static back pressure at compressor exit which may result from an imbalance of incidence …
-
Parametric Investigation of a Dielectric Barrier Dishcarge Plasma Actuator
… plasma actuator is considered an effective flow control device in various aerospace applications such as drag control, lift control, and stall control. The DBD plasma actuator has many potential benefits in active flow control applications, such as an absence of moving parts and low power draw. …
-
L1 Adaptive Control of Uncertain Nonlinear Systems with Dynamic Constraints: As Applied to Commercial Aircraft Engines
L1 adaptive control for a turbofan commercial aircraft engine is developed and applied in the presences of constraint limits. Turbofan engines are a highly complex system, with a wide variety of dynamics, operating under constantly changing environmental conditions. In aircraft turbofan operation …
-
Active Control of Shocks and Sonic Boom Ground Signal
… change is a much heightened subject. Active flow control has been the subject of the major research areas in fluid mechanics for the past two decades. It offers new solutions for mitigation of shock strength, sonic boom alleviation, drag minimization, reducing blade-vortex interaction noise in …
-
Unsteady separation control on wind turbine blades
Dynamic stall is one of the primary causes of unsteady loads on wind turbine blades. The process can be instigated by a multitude of factors, common in wind turbine operating environments, such as inflow turbulence, wind gusts and sustained yaw misalignment. The unsteady separation due to dynamic …
-
Compressor stability management
… mass flow rates. These instabilities, rotating stall and surge, are detrimental to engine life and operational safety, and are thus undesirable. In order to prevent stability problems, a passive technique, involving fuel flow scheduling, is currently employed on gas turbines. The passive nature …