Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"Stand-off Distance"”.
-
Experimental Investigation of Two-Bubble Cavitation Collapse Near a Rigid Wall: Effects of Stand-Off and Inter-Bubble Distance
… wall, focusing on the effects of bubble-to-wall stand-off distance and inter-bubble separation. Two bubbles were generated in deionized water using independently controlled pulsed Nd:YAG lasers. High-speed shadowgraphy and Schlieren imaging were used to characterize bubble dynamics and …
-
Evaluation of the anchor bolt clearance discrepancies apply for any anchor bolt connections
The clearance distance (a.k.a. stand-off distance) of the anchor bolt for double-nut moment joints is the distance between the bottom of the leveling nut and the top of concrete foundation. Previous research has investigated the effect of different loading conditions on the behavior of anchor bolts …
-
Motion Control for a Tracking Fluoroscope System
… by the dynamic and kinematic control systems, a stand-off distance controller is introduced and tested. The stand-off distance controller exhibits better performance than the other control systems proposed. Finally, a special setup process is developed and tested to rotate the vehicle in …
-
Investigation of stagnation-flow diamond-forming flames using advanced laser diagnostics
… National Laboratories, except that the measured distance between the substrate and the reaction zone is much less than predicted. The measurements show that the flame stand-off distance is approximately 0.6 to 0.8 mm along the stagnation streamline, while the model predicts a flame stand-off …
-
The effects of different degrees of confinement on the deformation of square plates subjected to blast loading
… is dependent on several factors; for instance stand off distance, geometry and mass of explosive, geometry of the structure, medium (air, water, soil) and degree of confinement. Depending on the location of the explosion relative to the surrounding structures different degrees of confinement …
-
Investigation of forces in the course of the water jet--work piece interaction
… rate, the diameter of the carbide tube, and the stand-off distance were also determined. The acquired informations will be used to improve the understanding of the mechanism of the jet formation and optimize the condition of cutting.
-
3D Printing Support-less Engineered Lattice Structures via Jetting of Molten Aluminum Droplets
… droplet jetting frequency, the droplet step-over distance, and the stand-off distance between the print head and the substrate, pillars with varying angles to the substrate could be printed. Also presented is the parameter study which maps droplets jetting frequency, and droplet step-over distance …
-
Descaling petroleum production tubing using multiple high-pressure nozzles
… flat fan nozzles of different arrangement and stand-off distance. Housed in a constructed simulated production tubing chamber with vacuum and compression capacities to remove hard scale deposits of SrSO4 and CaCO3. In addition to the constructed wax deposit (paraffin) of different shapes …
-
Increasing the Heat Transfer on a Grooved Surface Under Dry and Wet Conditions by Using of Jet Impingement
… array orifices diameter and array to surface stand-off distance. The results have shown that jet impingement is capable of delivering high transfer rates with lower cooling cost rates compared to current industry conventional techniques. Water is efficiently used in hybrid jet impingement …
-
Conceptual design of a stand-off weapon for maritime patrol aircraft
A conceptual design of a stand-off weapon to be launched from maritime patrol aircraft for use against hostile surface combatants was performed at the request of the Naval Air Test Center. The purpose of this thesis was to study the feasibility of developing a low-cost, anti-ship missile for air …
-
Underwater Movement of Obstacles Due to Explosive Detonation
… of charge, obstacle orientation and obstacle stand off distance from the charge.
-
Investigation of formation and applications of high-speed liquid projectiles
… is monotonously decreasing with increase of stand-off distance, the effect of stand-off distance onto penetration of brittle material has an extremal character. A series of experiments were carried out in order to investigate the demolition of brittle, deformation of ductile and …
-
Improving MMOD shield performance through control of debris cloud deflection
… thereby mitigating impact risks over extensive stand-off-distance. The design leverages the adaptability of the deflectors to the directional characteristics of orbital debris threats, providing a versatile shielding solution. To achieve a strong conceptual design, the study employs the γ-SPH …
-
Improving the Performance of Re-entry Vehicle in Hypersonic Flow by Morphing Nose cone by Bio-Mimicking Honey Bee Abdomen
… compared to the contracted position. The shock stand-off distance significantly influences the flow field. The shock-detachment distance is significantly greater during contraction and default phases, while it is reduced during extension phases. The velocity/Mach number decreases sharply in the …
-
AN EXPERIMENTAL AND NUMERICAL STUDY ON CAVITATION BUBBLE DYNAMICS AND ITS BIOMEDICAL APPLICATIONS
A thorough understanding of cavitation bubble dynamics is critical to mitigate cavitation damage or develop practical applications. An important field of study is the interaction of a single cavitation bubble with neighbouring structure(s). A cavitation bubble collapse near a finite elastic beam, …
-
Next-generation 3D electronics: merging polymer printing with molten metal droplet deposition
… The deposition frequency, droplet overlap, and stand-off distance strongly influence both track morphology and resistance. Increasing droplet overlap and deposition frequency widens the track and reduces its resistance. Changing the stand-off distance from 8 mm to 12 mm causes a significant …
-
A magnetospheric magnetic field model with flexible internal current systems
… can be represented by arbitrary functions of the distance along the magnetotail. Model configurations are completely specified by four initial physical input parameters: the dipole tilt angle, the magnetopause stand-off distance, the geomagnetic index D$\sp{\rm st}$, and the midnight equatorward …
-
Small-Scale Testing to Study Mitigation of Acceleration on Simulated Vehicles
… Initially, tests were performed to better understand the effects of vehicle mass and stand-off distance on vehicle acceleration due to blast loads; after which, studies were conducted to mitigate the acceleration. Test plates used in this study vary in both size and geometry. When necessary, …
-
Optical trapping and nanoscale sensing using NV centres in diamond
… sensors. The diminutive size ensures that the stand-off distance between the probe NV centre and the probed sample remains small. In order to best take advantage of their nanoscale size, techniques must be used to precisely control the position of the ND. A promising approach for precision …
-
Feed Rate Effects In Freeform Filament Extrusion
… ideal in large part because users lack an understanding of how critical process parameters affect the speed and diameter of polymer filament as it exits the nozzle. This research focuses on the issue of unwanted deformation of the extruded polymer during 3D printing. As a first step, the feeding …
Page 1 of 3