Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Standard Uncertainty"”.
-
Uncertainty Contributions To Species Specific Isotope Dilution Analysis
… statistically different, within the limits of uncertainty, from the certified values. An uncertainty budget for both IDMS procedures has been formulated to allow the performance of each method to be compared For single IDMS the major uncertainty contribution was derived from the within …
-
Heat transfer phenomena in flow through packed beds
… As part of the experimental procedure the standard uncertainty due to the instrument inaccuracies were determined. Data from the physical tests was systematically processed to obtain results of Nusselt number as a function of Reynolds number. From the processed data the relevant …
-
A Novel Metrology Standard for Synchrotron Produced Monochromatic X-ray Beams
… monochromatic x-ray beams with a standard uncertainty less than 1 %, significantly lower than current methods. Methods: The absorbed dose to water at a depth of 2 cm, D(w,2 cm), was evaluated using a purpose built novel aluminum calorimeter design. Finite element modeling and …
-
Design and evaluation of open-circuit respiration chambers for beef cattle
… documentation and quantification of measurement uncertainty. Research with the chamber technique is primarily focused on the application for understanding relationships between ruminant CH4 emissions and nutrition, genetics, and rumen biology. There is limited work regarding estimates of …
-
An analysis of the MSRE U-233 initial criticality for benchmark problem development
… and material composition), as well as an initial uncertainty analysis to quantify the standard uncertainty that could be expected for an associated benchmark description.
-
Commissioning of the Canadian Primary Standard for Low Dose Rate Brachytherapy
… of the NRC WAFAC and commission it as a primary standard. Significant enhancements were implemented to improve signal to noise ratio, measurement reproducibility and to eliminate electric field distortion. Validation of the ionization chamber was then carried out with a low-energy X-ray beam (31 …
-
A comparison of probabilistic and fuzzy inference for expert systems
… is modular, the truth-value assignments for Standard Uncertainty Logic (Gaines) can be derived; if the lattice is Boolean the value-assignments for Unconditional Probability Logic (Rescher) can be derived; if the lattice is a chain, the value assignments for a Fuzzy Logic (Zadeh) can be …
-
Tritium uncertainty analysis for surface water samples at the Savannah River site
… for the radioisotopic results reported. These uncertainty analyses pertain to the tritium results from surface water samples collected at five locations on the Savannah River near the U.S. Department of Energy's Savannah River Site (SRS). Uncertainties can result from the field-sampling …
-
Quantification of Uncertainties Due to Opacities in a Laser-Driven Radiative-Shock Problem
… new physics-based methods to estimate predictive uncertainty stemming from uncertainty in the material opacities in radiative transfer computations of key quantities of interest (QOIs). New methods are needed because it is infeasible to apply standard uncertainty-propagation techniques to the …
-
ZIF ir UIO metalo organinių karkasų dielektrinių savybių tyrimas /
… dielectric permittivity measurement method total standard uncertainty, investigate and compare ZIF-8, ZIF-90, ZIF-67 and UiO-66 compounds dielectric properties in 50- 500 K and in 1 Hz- 1 MHz frequency ranges. Dielectric permittivity measurements uncertainties (which are the cause of fringing …
-
Applications of machine learning in nuclear imaging and radiation detection
… on the test dataset. Furthermore, the combined standard uncertainty of the estimated REI by our model lies within 11%, with a confidence level of approximately 68%.</p> <p>The second problem is about automatic radioisotope identification in real-time. A comparison of five different machine …
-
Determination of Wair value in high energy electron beam
… Wair, is a key value in radiation dosimetry standards. It is used to convert the charge created into the energy deposited. The ICRU report 90 has reaffirmed the accepted value to be 33.97(12) eV and to be energetically independent above 10 keV. However, a recent publication by Tessier et al. …
-
Design and performance of an ammonia measurement system
… to measure ammonia. Performance tests included uncertainty analysis, system response, and adsorption kinetics. A measurement system was designed for measurement of gaseous emissions from ground level area sources (GLAS) in order to sample multiple receptors with a single sensor. This multiplexer …
-
Interfacing the Liquid Sampling- Atmospheric Pressure Glow Discharge Ion Source with Orbitrap Mass Spectrometers for High Accuracy High Precision Isotope Ratio Measurements of Uranium
… = 4.265622) as 4.266922, with a combined standard uncertainty, (uc), of 0.040%. Given these results, the LS-APGD-Orbitrap system shows excellent promise in the fields of nuclear forensics and nuclear safeguards where high certainty measurements are required.
-
Development of a scalable real-time Lagrangian particle tracking system for volumetric flow field characterization
… completed based on the derivation of measurement uncertainty. It was shown that by utilizing groups of four cameras in the 3D reconstruction process, the overall sensitivity to camera location, image noise and propagated uncertainty could be reduced significantly. A six camera prototype system was …
-
Fabrication and nanoroughness characterization of specific nanostructures and nanodevice
… process can be further regulated. The uncertainty propagation model of SEM based nanoroughness measurement was presented according to specific requirements of the relevant standards, ISO GPS (Geometric Product Specifications and Verification) and GUM (Guide to the Expression of …
-
Sub-hertz optical frequency metrology using a single ion of 171Yb+
<p>Optical frequency standards offer the possibility of a step improvement of up to two orders of magnitude in the accuracy with which the SI second can be realised. <sup>171</sup>Yb<sup>+</sup> possesses two dipole-forbidden optical transitions that are promising candidates for a redefinition of …
-
Metrological Developments for Aerosol and Mass Measurements
… by having traceability to recognized primary standards. Scientific and technological progress demand for and rely on developments in already established fields of metrology, such as mass, and in new evolving fields, such as aerosol particles, where the traceability is incomplete. In this …
-
Thermodynamic studies in flow metrology
… gravimetric gas mass flow rate measurement standard of MIKES was carried out. Then, a theoretical and experimental study to clarify the varying shear stress on the cylindrical surfaces and its contribution to the combined standard uncertainty of a dynamic gravimetric gas mass flow rate …
-
Nejistoty měření u vývojových zkoušek jističů a příslušenství
Tato bakalářská práce se zabývá stanovením nejistot přímých a nepřímých měření u vývojových zkoušek jističů numerickou metodou. Cílem je velikost nejistoty výkonu a návrhem opatření pro zlepšení kvality měření. Praktická část porovnává spočítanou hodnotu (Excel) se změřenou (osciloskop) a vyznačuje …
Page 1 of 2