Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"State Parameter"”.
-
Developing Soil-Specific CPT State Parameter Interpretation Using Calibration Chamber Tests
… relies on the determination of the in-situ state parameter ψ_0 from in-situ testing of cone penetration test (CPT) to assess the static liquefaction potential of tailings. The challenge is that ψ_0 is not what is directly measured; instead, it is calculated from the CPT measurements with the …
-
State, Parameter, and Input Estimation through MMSE Estimation for Structural Systems
… structural health monitoring seeks to track the state of structures experiencing nonlinearities while being subjected to high-rate events, like impacts. This research presents the development and application of the extended version of the finite input covariance estimator towards performing joint …
-
State, parameter, and unknown input estimation problems in active automotive safety applications.
… if the real-time values of several vehicle parameters and state variables, namely tire-road friction coefficient, slip angle, roll angle, and rollover index, can be known. Since there are no inexpensive sensors available to measure these variables, it is necessary to estimate them. However, …
-
Towards comprehensive interpretation of the state parameter from cone penetration testing in cohesionless soils
… dependent on both density and stress level. The state parameter is widely accepted to represent the soil behaviour encompassing both density and stress effects. Hence, determining the in-situ state parameter from CPT is of great practical interest. The CPT was analysed using a large strain …
-
Análise do comportamento de um rejeito de minério de ferro no estado do regime permanente
… been carried out todetermine the steady state line (SSL) of an iron tailing. The resultsallowed determining thestateparameters of the specimens and evaluatingits influenceon the material behavior. To analyse the instability/liquefactionbehavior ofthis iron tailing when subjected to a …
-
Exploring the influence of fabric at critical states in DEM and constitutive models for granular soils
Integration of fabric into Critical State Theory resulted in Anisotropic Critical State Theory, redefining the state parameter (Psi) as fabric-dependent dilatancy state parameter (Zeta). While Psi correlates with characteristic features of macroscopic behaviour, the relationship between Zeta and …
-
Reducing the size and power of stochastic computing neural networks through training.
… topologies contain an activation module with a state parameter that affects the respective output function as well as the size and power requirements. This thesis explores altering this state parameter and the network training process in order to reduce the size and power of each neuron without …
-
A Subclass of Exceptional Parallel Self-similar G2 Cosmologies
… We show that for the values of the equation of state parameter in (1,3/2), there exist open sets of well-behaved vacuum models that are asymptotically spatially homogeneous, at large spatial distances. For the values of the equation of state parameter in the intervals (1,10/9) and (4/3,3/2), …
-
Soil Specific Interpretation of the Cone Penetration Test
… results need to be interpreted into engineering parameters. In granular soils, the state parameter, which is the key driver of soil behaviour is explicitly the target of interpretation in applications such as liquefaction assessment in tailings. Any other application that depends on density or …
-
A SPECIAL PROTECTION SCHEME UTILIZING TRAJECTORY SENSITIVITY ANALYSIS IN POWER TRANSMISSION
… techniques with inputs consisting of system state variables and parameters. Trajectory sensitivity analysis (TSA) has been used in previous publications as a method for power system security and stability assessment, and the mathematical formulation of TSA lends itself well to some of the …
-
DETERMINING THE CONDITIONS REQUIRED FOR CYCLIC LIQUEFACTION OF CLAYEY TAILINGS WHEN VARIABLY SATURATED
… between the cyclic resistance ratio and state parameter like those for sandy and silty tailings. Results from simple shear tests and tests on models in a shear stack on a shaking table have the same relationship. Additionally, capillary rise may exist and cause negative water pressures to …
-
Static liquefaction of sand with a small amount of fines
… the reverse behaviour conforms to the critical state framework because significant changes in the position and geometry of the critical state [CS] and isotropic consolidation [IL] lines are caused by the presence of fines. These changes cannot be adequately modelled by the intergranular void …
-
Aspects of inflationary cosmology
We discuss aspects of excited initial states in inflationary cosmology. We review the basic framework of inflationary cosmology and how to compute observable correlation functions. The framework of excited initial states is introduced and the corrections to the cosmological parameters are computed. …
-
Experimental assessment of the instability locus in iron ore tailings: Influence of grading and stress paths
… monitoring purposes and examines the role of the state parameter in controlling shear wave velocity behaviour. A comprehensive laboratory testing programme was conducted, including triaxial compression tests, hollow cylinder tests, bender element tests, and resonant column tests. The experimental …
-
Assessing liquefaction potential of soils utilising in-situ testing.
… individually to each procedure. The critical state approach for liquefaction assessment introduced by Jefferies & Been (2006) is used to verify the assessment of both the CPT and DMT procedures. The simple critical state parameter test proposed by Santamarina & Cho (2003) is undertaken on 6 …
-
Cyclic liquefaction behaviour of granular materials with fines.
… Cyclic mobility can be categorised as a state of occurrence of 5% double amplitude (DA) axial strain and the effective stress path travel transiently to near zero in a load cycle, but the imposed peak (and trough) deviator stress can still be developed even a few loading cycles after the …
-
TOWARDS DIGITAL TWINNING OF CIVIL INFRASTRUCTURE THROUGH OUTPUT-ONLY STOCHASTIC SYSTEM IDENTIFICATION
… (RBE) is proposed and its gains and formula for state mean and covariance are derived. A key feature of the derivation lies in the rejection of the input to the system from the structure of the algorithm; this means that the input to the system is not present in any of the algorithm stages. …
-
Evolução top-hat hidrodinâmica em campos de velocidades peculiares primordiais
… models of dark energy with constant equation of state parameter in a flat Universe
-
Quantification of Human Thermal Comfort for Residential Building's Energy Saving
… emphasized on finding a meaningful and steady state parameter in human body that can be interpreted as comfort criterion which can be expressed as the general occupants' sensation through their ambient temperature. There are lots of researches on human physiological behavior in different …
-
Entanglement detection and fractional quantum Hall effect in optical lattices
… that in this form it detects all pure entangled states even without any spatial resolution. We then prove that correcting for certain reasonable types of experimental error is possible, and practical for error rates up to the order of one over the number of lattice sites considered. Limited …
Page 1 of 4