Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Static Condensation"”.

  1. An approach for efficient, conceptual-level aerospace structural design using the static condensation reduced basis element method

    … a recently proposed approach known as the “Static Condensation Reduced Basis Element (SCRBE) method” is quite attractive because of its versatility of modeling a wide variety of final problem configurations with a relatively small data set. This approach has been demonstrated on large-scale …

    gatech Repository record for An approach for efficient, conceptual-level aerospace structural design using the static condensation reduced basis element method (opens in a new tab)

  2. Analysis of structures subjected to dynamic loading.

    … was performed to investigate the error due to static condensation applied to dynamic problems. In the development of computer programs the stiffness method and the consistent mass matrix were used; and viscous damping was assumed.

    louisville Repository record for Analysis of structures subjected to dynamic loading. (opens in a new tab)

  3. Analysis of box-girder bridges by macro-element substructural method.

    … efficient macro-element substructure method for static analysis of straight box-girder bridge structures is successfully developed. The structure is considered as an assemblage of macro-element substrates. All of these macro-element substructures are identical in geometry. Each substructure is …

    ottawa-retro Repository record for Analysis of box-girder bridges by macro-element substructural method. (opens in a new tab)

  4. Stress analysis of rocket motors with viscoelastic propellant by a mixed finite element model

    … can be approximated independently. The method of static condensation is used to keep some stresses across interfaces of a solid of revolution discontinuous. The stiffness matrix is transformed from semi-positive definite to positive definite. A rocket motor is composed of (1) case (2) propellant …

    vt Repository record for Stress analysis of rocket motors with viscoelastic propellant by a mixed finite element model (opens in a new tab)

  5. Peridynamic-based multiscale frameworks for continuous and discontinuous material response

    … and a model order reduction method based on static condensation. These schemes were applied to benchmark problems and shown to be effective in reducing the computational requirement of peridynamic models without compromising the fidelity of the simulation results. Additionally, a first-order …

    strathclyde Repository record for Peridynamic-based multiscale frameworks for continuous and discontinuous material response (opens in a new tab)

  6. Combined boundary element and finite element analysis of composite bridges.

    … direction. For the finite element region, a static condensation technique is applied to condense the non-interface degrees of freedom. Then the finite element equations are transformed into boundary element equations and the compatibility interface mechanism required to combine the two …

    ottawa-retro Repository record for Combined boundary element and finite element analysis of composite bridges. (opens in a new tab)

  7. Aeroelasticity of wings coupling Navier-Stokes aerodynamics with wing-box finite elements

    … flow solver without the need for modal analysis. Static condensation is performed on the structural model to reduce the structural degrees of freedom for the aeroelastic analysis. Direct incorporation of the finite element wing-box structural model with the flow solver requires finding adequate …

    vt Repository record for Aeroelasticity of wings coupling Navier-Stokes aerodynamics with wing-box finite elements (opens in a new tab)

  8. Implementation of Third Order Plate Theory for use in Existing Finite Element Software

    … theory are developed and tested. Using static condensation to reduce the number of degrees of freedom required by a third-order plate element does not preserve the element's accuracy in either displacements or stresses, and stresses do not converge with refinement of the mesh. For the …

    vt Repository record for Implementation of Third Order Plate Theory for use in Existing Finite Element Software (opens in a new tab)

  9. A Comparison Between 7- and 12-Parameter Shell Finite Elements for Large Deformation Analysis

    … displacement based setting. This thesis includes static and transient analysis of various structures using aforementioned two shell elements. This is the first time that the seven-parameter formulation is used to compute a full transient response of shell structures. Deflections and maximum …

    tamu Repository record for A Comparison Between 7- and 12-Parameter Shell Finite Elements for Large Deformation Analysis (opens in a new tab)

  10. A multilevel superelement substructuring for boxlike caisson analysis.

    … superelement substructuring approach for linear-static analysis of rectangular boxlike caissons is developed. The structure is considered as an assemblage of superelements in three substructural levels. These are panel, layer, and caisson superelements. Each superelement substructure is derived …

    ottawa-retro Repository record for A multilevel superelement substructuring for boxlike caisson analysis. (opens in a new tab)

  11. Formulações Galerkin descontínuo-contínuo para o problema de Helmholtz

    … component. For the HDG formulation, we present a static condensation analysis where we obtain a global system that smaller than the global system generated by other current hybrid methods. Furthermore, we show that the HDG formulation is a well-posed problem from a certain degree of mesh …

    brazil-uerj Repository record for Formulações Galerkin descontínuo-contínuo para o problema de Helmholtz (opens in a new tab)

  12. A high-order accuracy flow solver for high-Reynolds-number stratified flows

    … several one-dimensional Helmholtz problems. Static condensation and modal boundary-adapted basis functions result in an inexpensive algorithm based on solving a large number of small tridiagonal systems. Particular care is taken to ensure that the model is suitable to simulate stratified …

    cornell Repository record for A high-order accuracy flow solver for high-Reynolds-number stratified flows (opens in a new tab)

  13. Nonlinear mixed finite element analysis for contact problems by a penalty constraint technique

    … contact problem in layered cylindrical bodies. Static condensation techniques are used to condense out the discontinuous components of stresses at the element level. The contact stress distribution and variation of contact area with load is computed for different loading situations. Furthermore, …

    vt Repository record for Nonlinear mixed finite element analysis for contact problems by a penalty constraint technique (opens in a new tab)

  14. Stabilized Finite Element Formulations for Flow Problems

    … method that may be considered an extension of static condensation to nonlinear problems. The Newton-Schur technique greatly increases parallel performance, which helps offset the computational cost produced by the decomposition of the multiscale framework. For a number of three-dimensional …

    uiuc Repository record for Stabilized Finite Element Formulations for Flow Problems (opens in a new tab)

  15. Hybridizable Discontinuous Galerkin Methods for Flow and Transport: Applications, Solvers, and High Performance Computing

    … complicated meshes, and enables the use of static condensation. We demonstrate that the HDG method is able to e ciently generate high- delity simulations of ow and transport phenomena in porous media. Several challenging benchmarks are used to verify and validate the method in heterogeneous …

    rice Repository record for Hybridizable Discontinuous Galerkin Methods for Flow and Transport: Applications, Solvers, and High Performance Computing (opens in a new tab)

  16. Solution-Acceleration Strategies for High-Order Unstructured Methods

    … allows a reduction of the implicit system via static condensation, decreasing implicit time stepping costs, especially at higher orders. Hybridization with both discontinuous (HFR) and continuous function spaces (EFR) is suitable for advection and advection-diffusion type problems within the FR …

    concordia Download PDF for Solution-Acceleration Strategies for High-Order Unstructured Methods (opens in a new tab)

  17. Mechanical behavior of triaxial woven fabric (TWF) composites

    … element technique suggested herein and the static condensation procedure. Superelement 1 can be used for the vibration analysis with some economy of computer space and time. Superelement 2 can be used for detailed stress analysis and for strength prediction. Although these two elements are …

    concordia Download PDF for Mechanical behavior of triaxial woven fabric (TWF) composites (opens in a new tab)

  18. Reduced-order modelling of nonlinear dynamic structures

    … reduction techniques, such as the Implicit Condensation and Expansion (ICE) method, which rely on a static condensation procedure to achieve reduction for structures characterised by slow/fast dynamics.<br/>In this thesis, several developments of the ICE method are proposed. First it is …

    bristol Repository record for Reduced-order modelling of nonlinear dynamic structures (opens in a new tab) Download PDF for Reduced-order modelling of nonlinear dynamic structures (opens in a new tab)

  19. Computational fluid dynamics on wildly heterogeneous systems

    … of elliptic solvers to a linear one. First, the static condensation method improves the condition of the system, then the associated operator is cast into matrix-free tensor-product form and factorized to linear complexity. The low increase in the condition and the linear runtime of the operator …

    qucosa-diss

Page 1 of 2